- 商品說明
商品說明
Lightning Detector – AS3935 閃電探測器 颱風 氣象偵測
可為您的氣象偵測站添加雷電檢測功能,以確保您了解任何潛在的危險天氣。AS3935能夠探測距離最遠40公里的閃電,精確度為風暴前方1公里,並配有靈敏的天線,可以調節500kHz頻段內的閃電事件。
有許多錯誤來源可能會導致誤報,但閃電探測器本身可以在默認情況下可靠的過濾掉這些誤差。如果沒有,我們確保包含您可以使用閃電探測器庫配置的設置,以提高芯片對噪聲和誤報的穩健性。雷電探測器庫還可讓您訪問室內與室外探測時的風暴感應靈敏度,或觸發中斷所需的雷擊次數。
特徵
- 閃電感應
- 40km範圍,精確度為1km,共14步
- 特徵
- 可編程檢測水平
- 距風暴估計的距離
- “Disturber”(虛假事件)拒絕算法
- 室內和室外設置
- SPI接口
- 工作範圍
- 電源電壓:2.4V – 5.5V
原廠官網提供了程式範例,可讓您探得風暴感應靈敏度,室內與戶外探測設置或觸發中斷所需的雷擊次數等設置!但該程式版本僅適用於SPI
Documents
=========================================================
SparkFun Lightning Detector – AS3935
The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potential hazardous weather heading your way. The AS3935 is capable of detecting lightning up to 40km away with an accuracy of 1km to the storm front with a sensitive antenna tuned to pick up lightning events in the 500kHz band.
There are a number of sources that can cause false positives but the lightning detector itself can reliably filter these out by default. If not, we’ve made sure to include settings you can configure using the lightning detector library to increase the chip’s robustness to noise and false positives. The lightning detector library also gives you access to settings such as storm sensing sensitivity when detecting indoors vs outdoors, or the number of lightning strikes needed to trigger an interrupt.
Features
- Lightning Sensing
- 40km Range with accuracy of 1km in 14 steps
- Features
- Programmable Detection Levels
- Distance to storm estimation
- “Disturber” (false event) rejection algorithm
- Indoor and Outdoor Settings
- SPI Interface
- Operating Range
- Supply Voltage: 2.4V – 5.5V
Documents
- Schematic
- Eagle Files
- Hookup Guide
- Lightning Detector for the Trail
- Datasheet (AS3935)
- Library and Example Sketches
- GitHub Hardware Repo
相關商品
-
FlexiForce 壓力感測器 – 1磅 SparkFun原廠
0 滿分 5 分
NT$781NT$740 未稅加入購物車Quick View -
Gravity: Analog Turbidity Sensor 水濁度感測器 水質檢測 養殖環境監測 For Arduino DFRobot原廠
0 滿分 5 分濁度感測器利用光學原理,通過測量溶液中的透光率和散射率來綜合判斷溶液濁度情況,從而達到檢測水質的目的。
NT$648NT$500 未稅加入購物車Quick View -
Analog pH Meter Pro Sensor 模擬檢測 PH值(專業版) 相容Arduino DFRobot原廠
0 滿分 5 分NT$2,667NT$2,460 未稅加入購物車Quick View -
Grove – Alcohol Sensor 酒精感測器 seeed原廠
0 滿分 5 分酒精感測器(傳感器)為酒精專用檢測半導體傳感器。它具有良好的靈敏度和回應速度快的特性,本模組適用用於開發便攜式酒精檢測系統。
NT$286NT$220 未稅加入購物車Quick View -
Grove – Infrared Temperature Sensor 紅外線 溫度感測器模組 seeed原廠
0 滿分 5 分紅外溫度傳感器通過接收物體發出的紅外線來測量其溫度。
NT$457NT$380 未稅加入購物車Quick View -
Grove – Air quality sensor v1.3 空氣品質感測器模組 seeed原廠
0 滿分 5 分主要可以監測的氣體是一氧化碳,醇,丙酮,稀釋劑,甲醛等輕微毒性氣體。本模組兼容 5V和3.3V電源。
NT$457NT$300 未稅加入購物車Quick View -
ESP8266 串口 WIFI模組 遠距離 無線模組 ESP-07
0 滿分 5 分半孔貼片工藝,所有IO引出,帶金屬屏蔽殼,可過FCC CE認證,可外接IPX天線,也可用內置陶瓷天線
NT$143NT$100 未稅加入購物車Quick View -
加入購物車Quick View
HC-05 串口藍牙模組 (帶底板) 主機/從機可設定 / 帶底板,附 Arduino 範例
0 滿分 5 分請勿將電源接到信號腳上,會直接燒壞模組!
藍牙透傳模組只有4個AT指令,分別是測試通訊,改名稱,改串列傳輸速率,改配對密碼,AT指令必須從TXD,RXD信號腳設置,不能通過藍牙通道設置。發送AT指令的設備可以是各種類型的MCU(比如51,avr,pic,msp430,arm等),也可以是電腦通過串口(PC串口接MAX232以後或者USB轉串口)發送。
加入購物車Quick View -
Grove – RTC 高精度時間模組 seeed原廠
0 滿分 5 分支持I2C協議的時鐘芯片DS1307。它使用鋰電池(CR1225)。時鐘/日曆提供秒,分,小時,日,日,月和年信息。
NT$271NT$220 未稅加入購物車Quick View -
Fermion:LWLP5000 差壓感測器±500pa DFRobot原廠
0 滿分 5 分NT$1,524NT$1,420 未稅加入購物車Quick View