SD Card Shield V4 擴展板 seeed原廠
它提供了您的Arduino一個存儲空間。用戶可以讀/通過的Arduino內置的SD庫寫入SD卡。它支持SD,SDHC和Micro SD卡。它只會佔用你的Arduino的SPI端口。
- 商品說明
商品說明
SD Card Shield V4 擴展板
這是新發布的 SeeedStudio SD Card Shield V4 擴展板。它提供了您的Arduino一個存儲空間。用戶可以讀/通過的Arduino內置的SD庫寫入SD卡。它支持SD,SDHC和Micro SD卡。它只會佔用你的Arduino的SPI端口。相較於以前的版本,它結合了標準的SD插槽和微型SD插槽成標準之一,包括適配器使使用的Micro SD卡。您可以堆疊,與未使用的引腳工作的其他盾牌。此外,預製I2C和UART接口方便與Grove 感測器連接。
特徵
- 支持SD卡,SDHC卡和TF卡兼容
- UART Grove和I2C連接兼容
- 完全支持SD庫函數
- 佔用端口最少,使用SPI端口
- 可以直接插在Arduino上使用
規格
項目 | 敏 | 典型 | 馬克斯 | 單元 |
電壓 | 3.5 | 5 | 5.5 | V |
當前 | 0.159 | 100 | 200 | 嘛 |
支持的卡類型 | SD卡(<= 32G); Micro SD卡(<= 32G); SDHC卡(<= 32G) | / | ||
尺寸 | 68.7×53.5×19.00 | 毫米 | ||
淨重 | 14.8 | G |
出貨清單
- SD Card Shield V4 x1
Documents
=========================================================
SD Card Shield V4
This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino’s built-in SD library. It supports SD, SDHC and Micro SD cards. It will only occupy the SPI port of your Arduino. Comparing to previous versions, it combines the standard SD slot and the Micro SD slot into a standard one, the included adaptor enables using of Micro SD cards . You can stack on other shields that work with the unused pins. Additionally, the preformed I2C and UART port facilitate your connection with Grove modules.
Features
- Stand SD card、SDHC card and TF card compatible
- UART Grove & I2C connection compatible
- Fully supported SD Library
- Minimal number of SPI port
- Truly stackable
Specification
Item | Min | Typical | Max | Unit |
Voltage | 3.5 | 5.0 | 5.5 | V |
Current | 0.159 | 100 | 200 | mA |
Supported Card Type | SD card(<=32G); Micro SD card(<=32G); SDHC card(<=32G) | / | ||
Dimension | 68.7×53.5×19.00 | mm | ||
Net Weight | 14.8 | g |
相關商品
-
Grove – Gas Sensor(MQ3) 酒精濃度 氣體 感測器模組 seeed原廠
0 滿分 5 分它可以檢測酒精,汽油,甲烷,己烷,液化石油氣,CO 其感測速度與回應的非常靈敏快速。也靈敏度可以由電位進行調整。
NT$362NT$240 未稅加入購物車Quick View -
Grove – BLE 工業級 UART轉 BLE 藍牙 HM-11 藍芽模組 seeed原廠
0 滿分 5 分NT$638NT$460 未稅加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
Grove – Digital Light Sensor 數位型光敏感測器 偵測光亮強度傳感器 seeed原廠
0 滿分 5 分NT$400NT$320 未稅加入購物車Quick View -
Grove – Ultrasonic Ranger 超音波測距模組 距離探測傳感器 seeed原廠
0 滿分 5 分Grove – Ultrasonic Sensor是一個非接觸式的距離探測模塊。他的工作頻率在42KHz,適合用於中距離或近距離的探測。已經附上 Arduino 函數庫。
NT$190NT$140 未稅加入購物車Quick View -
Grove – 3-Axis Digital Gyro 三軸電子陀螺儀 (I2C) ITG 3200 seeed原廠
0 滿分 5 分電子輸出的三軸MEMS運動處理陀螺儀。適用於遊戲、3D鼠標或其他運動檢測相關的應用。
NT$952NT$620 未稅加入購物車Quick View -
Grove – Chainable RGB LED 全彩 RGB 可串接式 LED 模組 seeed原廠
0 滿分 5 分Grove – Chainable RGB LED是基於P9813全彩LED驅動晶片的RGB LED模塊。它支持串接,最多可同時串接1024個同類模組。
NT$162NT$120 未稅加入購物車Quick View -
Grove – UV Sensor UV 紫外線感測器 seeed原廠
0 滿分 5 分NT$457NT$300 未稅加入購物車Quick View -
Grove – Flame Sensor 火焰感測器 seeed原廠
0 滿分 5 分NT$371NT$200 未稅加入購物車Quick View -
Grove – Sound Sensor 聲音感測器 seeed原廠
0 滿分 5 分聲音感測模組是一個麥克風元件,它可以用於檢測偵測環境中的聲音強度。而偵測到的資料輸出的值可以由電位進行調整。
NT$238NT$180 未稅加入購物車Quick View