RELAYplate 樹莓派專用 7 路繼電器擴展板 可堆疊到最高 56 路繼電器 UL 60950 安規 SparkFun原廠
RELAYplate 是 Raspberry Pi 樹莓派的第一個專用繼電器擴展板,符合滿足 UL 60950 的安全規範要求,同時能夠切換 120v交流電。
- 商品說明
商品說明
RELAYplate 樹莓派專用 7 路繼電器擴展板 可堆疊到最高 56 路繼電器 UL 60950 安規
RELAYplate 是 Raspberry Pi 樹莓派的第一個專用繼電器擴展板,符合滿足 UL 60950 的安全規範要求,同時能夠切換 120v交流電。七個繼電器中的每一個均通過UL額定值在120v交流電或30v直流電上切換1安培。而且,像所有Pi板一樣,您可以堆疊這些板,使用八塊板將繼電器數增加到 56 路。RELAY板與DAQCplate和MOTORplate兼容,可以創建完美的電路板來控制您的項目。
最高可以堆疊擴充到 56 路繼電器
特徵
- 七個單刀單擲繼電器
- 額定電壓為120伏交流電或30伏直流電
- 電流高達1安培
- 方便的無螺紋接線端子
- 最多可將八個RELAY板堆疊在一起,提供56個繼電器
- 單個RELAYplate將從Raspberry Pi 5VDC電源運行
- 提供用於堆疊多個RELAY板的輔助電源連接器
- 包括可編程LED
- 七個LED信號器提供可視中繼狀態
- 旨在滿足UL標準60950的嚴格安全要求
Documents
=========================================================
RELAYplate
The RELAYplate from Pi-Plates is the first dedicated relay board for the Raspberry Pi designed to meet the safety requirements of UL 60950 while being capable of switching 120 volts AC. Each of the seven relays is UL rated to switch 1 amp at 120volts AC or 30 volts DC. And, like all Pi-Plates, you can stack these boards to increase your relay count to 56 using eight plates. The RELAYplate board is compatible with the DAQCplate and MOTORplate, allowing you to create the perfect stack of boards to control your project.
Pi-Plates are a family of stackable and interchangeable add-on circuit boards that allow you to interact with the outside world using your Raspberry Pi. Every Pi-Plate is designed to provide a robust set of features at minimal cost while using the fewest pins possible on the RPi header. Pi-Plates are mechanically and electrically compatible with all revisions of the Raspberry Pi with 40 pin headers (including the Pi 3 Model B and Pi Zero) and are designed to satisfy the needs of hobbyists, experimenters and professionals.
Features
- Seven single-pole, single-throw relays
- Rated at 120 volts AC or 30 volts DC
- Currents up to 1 amp
- Convenient screwless terminal blocks
- Up to eight RELAYplates can be stacked together, providing 56 relays
- A single RELAYplate will run from the Raspberry Pi 5VDC supply
- Auxiliary power connectors provided for stacking multiple RELAYplates
- Includes programmable LED
- Seven LED annunciators provide visual relay status
- Designed to meet the stringent safety requirements of UL standard 60950
Documents
相關商品
-
加入購物車Quick View
樹莓派散熱片 Raspberry Pi Model B+ / Pi3 / Pi4 工控箱上機專用 , 三件式鋁鰭散熱片附帶散熱貼
0 滿分 5 分三件式套件包含: 晶片散熱片14*14mm (1片) + 9*9mm (1片) + 14*9mm(1片)
散熱片已經貼上專用散熱貼,只需撕下紙片,就可以放心使用
加入購物車Quick View -
ReSpeaker 4-Mic Array for Raspberry Pi 樹莓派 語音助理 人工智慧開發套件 seeed原廠
0 滿分 5 分用於 Raspberry Pi 的 ReSpeaker 4-Mic Array 是 Raspberry Pi 用於AI 和語音應用的四麥克風擴展板。這意味著您可以構建一個集成了Amazon Alexa語音服務,Google智能助理等的功能更強大,更靈活的語音產品。
NT$848NT$700 未稅加入購物車Quick View -
加入購物車Quick View
樹莓派 3 代 Raspberry Pi 3 Model B 主板 Pi3B 開發板 NCC認證 英國製
0 滿分 5 分加入購物車Quick View -
樹莓派 攝影鏡頭 CSI 排線 50CM 加長版特製 特別訂製排線
0 滿分 5 分英國原廠默認贈送的是15cm,比較短,只適合把攝像頭放在樹莓派旁邊,不適合工業用機台安裝或者自動車的配置,台灣物聯科技特別請廠商開模訂製兩種尺寸, 本商品為 50CM 版本, 另有30CM 版
NT$124NT$90 未稅加入購物車Quick View -
DS3231 RTC 高精度時鐘模組 適用 Raspberry Pi 樹莓派 全系列開發板
0 滿分 5 分最高精度 時鐘模組 DS3231, Raspberry Pi B 和 Raspberry Pi B+ 都可用 , 模組自身能適應3.3V和5V的系統,無需電位轉換。樹莓派主板本身沒有硬件時鐘電路,本模組就是用於樹莓派的硬件時鐘電路。在沒有網絡授時服務的情況下,樹莓派還是會精確走時,解決重啟變1970年和重啟不走時的困擾。
NT$143NT$90 未稅加入購物車Quick View -
加入購物車Quick View
Raspberry Pi 3 Model A+ 樹莓派 Pi3A+ Plus 開發板
0 滿分 5 分Raspberry Pi 3 A +繼承了其Raspberry Pi 3 B +的大部分功能。它集成了1.4 GHz 64位四核處理器,具有雙頻2.4GHz和5GHz無線局域網,藍牙4.2和改進的熱管理功能。
選購:Raspberry Pi 3A+ 鋁合金外殼 雙散熱風扇外殼
加入購物車Quick View -
樹莓派攝影鏡頭專用 30CM 加長版特製 CSI 排線 特別訂製排線
0 滿分 5 分英國原廠默認贈送的是15cm,比較短,只適合把攝像頭放在樹莓派旁邊,不適合工業用機台安裝或者自動車的配置,台灣物聯科技特別請廠商開模訂製兩種尺寸, 本商品為 30CM 版本, 另有50CM 版
NT$114NT$62 未稅加入購物車Quick View -
樹莓派 3代 B+ 專用 GPIO Shield 擴展板 V3 可堆疊
0 滿分 5 分樹莓派3 代B+ 專用 GPIO擴展板 V3 可堆疊
絕對的調試神器,把GPIO分別複製三次,GPIO分開使用,不會打架
樹莓派3代B+專用GPIO擴展板,採用堆疊式的積木設計,將樹莓派的IO口一組擴展出三組,每個IO口我們都有清晰的標記,方便使用。我們還附送帶螺絲和銅柱,讓擴展板更加牢固的固定在主板上,讓大家在做實驗和DIY的時候更方便。
NT$400NT$333 未稅加入購物車Quick View -
樹莓派3 A+外殼 Raspberry Pi 3A+ 壓克力外殼 六片式組合
0 滿分 5 分NT$143NT$100 未稅加入購物車Quick View -
加入購物車Quick View
樹莓派 4代 Raspberry Pi 4 Model B 8GB 開發板 原廠公司貨 贈送三件式鋁鰭散熱片
0 滿分 5 分加入購物車Quick View