樹莓派 7吋觸控顯示器 Raspberry Pi 樹莓派官方原廠公司貨
NT$2,900 未稅
本產品非人為因素故障保固3個月
尚有庫存
- 商品說明
商品說明
-
觸控螢幕 市場上唯一支持10點觸控螢幕
Raspberry Pi LCD Touch Screen — 7 inch
The Raspberry Pi has it’s very own official LCD Touch Screen. A few years in the making, the Raspberry Pi Foundation wanted you to have the perfect display screen for your Pi without compromise.
Features & Benefits of the Pi LCD Touch Screen
• Multi-touch capacitive touch screen — supports up to 10 finger touches
• 7 inch display
• 800 x 480 pixel resolution at 60 frames per second (fps)
• 24-bit RGB colour
• 70° viewing angle
• Only two connections required
• Flexible power supply
• No electronic interference
• Full Raspbian OS functionality without a keyboard and mouse
• Kivy touch screen development software available —http://kivy.org/docs/installation/installation-rpi.html
LCD Touch Screen Contents
• LCD touch screen
• Adapter board
• DSI ribbon cable
• 4 jumper wires
• Mounting hardware
Setting up your LCD Touch Screen
Set up is quick and easy. The adapter board and your Pi are mounted to the rear of the LCD using the basic fixings supplied. The DSI ribbon cable provides the display interface between the Pi and the LCD assembly.
Power Supply Options for your LCD Touch Screen
• Separate supply — Power the display board separately to the Pi using a uUSB power supply of least 500 mA
• Raspberry Pi 2A power supply — Connect a Pi power supply (8226373) to the display board. The board can then power the Pi via USB connection
• GPIO jumpers — Power the display board from the Pi using the supplied jumper wires
https://www.raspberrypi.org/blog/the-eagerly-awaited-raspberry-pi-display/
相關商品
-
8路 電平轉換模組 3.3V和5V IO雙向互轉 支援樹莓派與 Arduino
0 滿分 5 分8路 電平轉換模組 3.3V和5V IO雙向互轉 (適合樹莓派或串口類型模組接5V傳感器)
因莓派 GPIO是3.3V的,所以接常規的5V 感測器很不方便。因此本產品實現8通道的高電壓邏輯與低電壓邏輯雙向轉換,實現Ax與Bx雙向互轉。轉換電平範圍:1.8V-6V
8 Channel 3.3V To 5V Voltage Convert Module For Raspberry Pi
NT$129NT$95 未稅加入購物車Quick View -
樹莓派攝影鏡頭專用 30CM 加長版特製 CSI 排線 特別訂製排線
0 滿分 5 分英國原廠默認贈送的是15cm,比較短,只適合把攝像頭放在樹莓派旁邊,不適合工業用機台安裝或者自動車的配置,台灣物聯科技特別請廠商開模訂製兩種尺寸, 本商品為 30CM 版本, 另有50CM 版
NT$114NT$62 未稅加入購物車Quick View -
Micro USB 附帶開關 電源線 充電線 1.5米 適 Raspberry Pi RPi 樹莓派 Android
0 滿分 5 分樹莓派 micro usb 接口電源線帶開關
樹莓派沒有開關,斷電關機只能是拔掉USB線,非常麻煩。特別是在初步調試過程中,很不方便。
注意:本線不能當做數據線,只能當作電源線!
NT$124NT$114 未稅加入購物車Quick View -
樹莓派 LoRa/GPS HAT擴展板 868M frequency 樹莓派專用 seeed原廠
0 滿分 5 分樹莓派 LoRa/GPS HAT 擴展版 – 868M frequency 樹莓派專用 Lora / GPS 擴展版
- Raspberry pi Lora和GPS的擴展版
- 頻率:868兆赫
- Raspberry Pi 的2 model B / Raspberry Pi 3 完全相容
- FSK, GFSK, MSK, GMSK, LoRa™and OOK modulation
- EASY™, advanced AGPS technology 無需外部記憶體
加入購物車Quick View -
樹莓派鋰電源擴展板 雙USB輸出 Pi3獨立外場供電移動電源模組
0 滿分 5 分Raspberry Pi 樹莓派鋰電源擴展板 雙USB輸出 Pi3獨立外場供電移動電源模組
專為樹莓派打造的鋰電池移動電源,能讓樹莓派主板最大脫機工作長達9小時。當然,我也不限於用到樹莓派上,我板載2個USB-A接口,1個可以為Pi主板供電。如有需要的話,另一個可以為嵌入式液晶屏等設備供電。我的內部集成一顆進口鋰電充電/升壓管理芯片。帶上自身的電池,重量僅僅80g。嚴格按照國際樹莓派HAT擴展版尺寸進行研發,用簡單的銅柱即可和樹莓派主板進行層疊安裝。NT$505NT$467 未稅加入購物車Quick View -
新款PL2303TA USB轉串口模组傳輸線 USB轉 TTL/RS232 支持WIN7
0 滿分 5 分注意!WIN8/WIN10 不支援!
NT$190NT$80 未稅加入購物車Quick View -
樹莓派原廠外殼 Raspberry Pi 3B專用 Model 3B ABS 透明 (3B+不適用)
0 滿分 5 分原裝樹莓派 Raspberry pi B+ 英國原廠ABS外殼
Raspberry Pi B+/ Pi 2 B Cases — 3 part assembly
NT$333NT$190 未稅加入購物車Quick View -
DS3231 RTC 高精度時鐘模組 適用 Raspberry Pi 樹莓派 全系列開發板
0 滿分 5 分最高精度 時鐘模組 DS3231, Raspberry Pi B 和 Raspberry Pi B+ 都可用 , 模組自身能適應3.3V和5V的系統,無需電位轉換。樹莓派主板本身沒有硬件時鐘電路,本模組就是用於樹莓派的硬件時鐘電路。在沒有網絡授時服務的情況下,樹莓派還是會精確走時,解決重啟變1970年和重啟不走時的困擾。
NT$143NT$90 未稅加入購物車Quick View -
加入購物車Quick View
樹莓派 三代 Pi3 B+ 通用 鋁合金機殼 鋁合金殼體 (黑色)
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
樹莓派散熱片 Raspberry Pi Model B+ / Pi3 / Pi4 工控箱上機專用 , 三件式鋁鰭散熱片附帶散熱貼
0 滿分 5 分三件式套件包含: 晶片散熱片14*14mm (1片) + 9*9mm (1片) + 14*9mm(1片)
散熱片已經貼上專用散熱貼,只需撕下紙片,就可以放心使用
加入購物車Quick View