- 商品說明
商品說明
Qwiic 專用連接線 – 麵包板跳線 (4針)
這是一根跳線適配器電線,其一端端接Qwiic JST凹形連接器,另一端端接麵包板連接尾纖。通過該電線,可以輕鬆地將具有Qwiic連接器的組件連接到麵包板或基於Arduino的設備的引腳上。
28AWG電線的長度為150mm(約5.9英寸)。適配器的電線已顏色編碼為紅色,黑色,藍色和黃色。此外,Qwiic母連接器的基本間距為1mm,而公連接銷可以輕鬆插入標準的0.1“連接器中。
所有Qwiic電纜均具有以下配色方案和佈置:
- 黑色= GND
- 紅色= 3.3V
- 藍色= SDA
- 黃色= SCL
特徵
- 尺寸:150毫米(5.9英寸)長
Documents
=========================================================
Qwiic Cable – Breadboard Jumper (4-pin)
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins.
The 28AWG wire’s length is 150mm (about 5.9 inches). The adapter’s wires have been color coded to red, black, blue and yellow. Additionally, the female Qwiic connector features a basic 1mm pitch, while the male hookup pins can easily insert into a standard 0.1″ connector.
All Qwiic cables have the following color scheme and arrangement:
- Black = GND
- Red = 3.3V
- Blue = SDA
- Yellow = SCL
The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
Features
- Dimensions: 150mm (5.9″) Length
Documents
相關商品
-
加入購物車Quick View
SYB-500 組合型大麵包板 多功能實驗板 優質麵包板 萬能洞洞板 彩條線路板 電路板
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
PCB 玻璃纖維電路板 萬用板 洞洞板 雙面噴錫板 5×7,7×9,9×15三種尺寸可選
0 滿分 5 分加入購物車Quick View -
PCB 玻璃纖維電路板 2x8cm 萬用板 洞洞板 雙面 2*8公分
0 滿分 5 分PCB 玻璃纖維電路板 2x8cm 萬用板 洞洞板 雙面 2*8公分
雙面噴錫板 2*8cm 萬用板 厚1.6mm 玻璃纖維綠油板 2cmx8cm 洞洞板
- 孔中心距:2.54MM
- 孔径:0.95MM
- 厚度:1.6MM
NT$17NT$11 未稅加入購物車Quick View -
Grove – 4x1p公端杜邦線 to Grove 4pin母座連接線 20cm (5條包裝) seeed原廠
0 滿分 5 分5條- Grove- 4x1p公端杜邦線 to Grove 4pin母座連接線
NT$129NT$120 未稅加入購物車Quick View -
加入購物車Quick View
樹莓派 外殼 Raspberry Pi 2,3 代 工控專用 ABS 透明機殼 GPIO 保護盒子 (可壁掛)
0 滿分 5 分出貨產品不含圖片裡的樹梅派開發板 !
此產品為專為樹莓派 3B與 3B+ 量身打造的一款極度實用的保護外殼,物超所值,操作簡單。產品為透明ABS塑料材質,完善的安裝孔和接口使該外殼即能保護裡面的板子,又能夠充分開發所有端 口。使用時請參看我們的說明,來固定樹莓派,並且安裝矽膠墊。
加入購物車Quick View -
Arduino 實驗通用零件包
0 滿分 5 分Arduino 實驗通用零件包
有了這款配置好的元件包之後,玩arduino 基本上就不需要再去買什麼零星的電子物料了
NT$143NT$100 未稅加入購物車Quick View -
加入購物車Quick View
迷你 170孔 麵包板帶扣 Arduino實驗平台 迷你麵包板
0 滿分 5 分顏色隨機發貨
尺寸:35*47*8.5mm
一個端子條:170個插孔
有各種顏色
磷青銅鍍鎳彈簧夾
匹配跳線,線徑0.8mm
塑件:ABS
用途:實驗、測試、機器人
特點:可循環使用,環保回收 結構顏色清晰,易於使用
加入購物車Quick View -
DC電源轉接板 直流電源模組 紅板
0 滿分 5 分直流電源模組 DC 電源模組 DC 電源轉接板
- 名稱:直流電源轉接板
- 尺寸:2.8cm*1.3cm
- 適用接頭:5.5*2.1mm
- 預留2個單排針焊接孔,直接安裝在洞洞板上,方便測試
- 電源輸出接口:2路VCC,2路GND
NT$52NT$29 未稅加入購物車Quick View -
DC 5.5*2.5mm 母轉 Micro USB 轉接頭
0 滿分 5 分DC 5.5*2.5mm 母轉 MicroUSB 轉接頭 可接5V變壓器 充電器 旅充
NT$48NT$29 未稅加入購物車Quick View -
40P 1P-1P (公對公) 公座對公座 線長30CM 杜邦線 杜邦接頭 間距 2.54mm
0 滿分 5 分40P 1P-1P (公對公) 杜邦母座對公座 線長30CM 杜邦線 杜邦接頭 間距 2.54mm
NT$90NT$67 未稅加入購物車Quick View