- 商品說明
商品說明
Qwiic 專用連接線 – 麵包板跳線 (4針)
這是一根跳線適配器電線,其一端端接Qwiic JST凹形連接器,另一端端接麵包板連接尾纖。通過該電線,可以輕鬆地將具有Qwiic連接器的組件連接到麵包板或基於Arduino的設備的引腳上。
28AWG電線的長度為150mm(約5.9英寸)。適配器的電線已顏色編碼為紅色,黑色,藍色和黃色。此外,Qwiic母連接器的基本間距為1mm,而公連接銷可以輕鬆插入標準的0.1“連接器中。
所有Qwiic電纜均具有以下配色方案和佈置:
- 黑色= GND
- 紅色= 3.3V
- 藍色= SDA
- 黃色= SCL
特徵
- 尺寸:150毫米(5.9英寸)長
Documents
=========================================================
Qwiic Cable – Breadboard Jumper (4-pin)
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins.
The 28AWG wire’s length is 150mm (about 5.9 inches). The adapter’s wires have been color coded to red, black, blue and yellow. Additionally, the female Qwiic connector features a basic 1mm pitch, while the male hookup pins can easily insert into a standard 0.1″ connector.
All Qwiic cables have the following color scheme and arrangement:
- Black = GND
- Red = 3.3V
- Blue = SDA
- Yellow = SCL
The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
Features
- Dimensions: 150mm (5.9″) Length
Documents
相關商品
-
DC電源轉接板 直流電源模組 紅板
0 滿分 5 分直流電源模組 DC 電源模組 DC 電源轉接板
- 名稱:直流電源轉接板
- 尺寸:2.8cm*1.3cm
- 適用接頭:5.5*2.1mm
- 預留2個單排針焊接孔,直接安裝在洞洞板上,方便測試
- 電源輸出接口:2路VCC,2路GND
NT$52NT$29 未稅加入購物車Quick View -
加入購物車Quick View
PCB 玻璃纖維電路板 萬用板 洞洞板 雙面噴錫板 5×7,7×9,9×15三種尺寸可選
0 滿分 5 分加入購物車Quick View -
4節3號AA串聯電池盒帶線(約13cm)
0 滿分 5 分NT$29NT$20 未稅加入購物車Quick View -
USB 9V升壓線 5V轉9V 升壓線 支援Arduino 行動電源升壓線
0 滿分 5 分讓您的 Arduino 專案不用擔心電壓不足的情況,透過行動電源或者一般 PC USB 升壓 9V 給 Arduino 外部供電, 您可以使用任何一種大容量的行動電源當呈給 Arduino 的電池供電,穩定的透過 Arduino 5.5×2.1 外部電源接口穩定供電。
NT$95NT$76 未稅加入購物車Quick View -
Grove – Universal 4 pin connector 通用4針90°端子頭 (10個一包) seeed原廠
0 滿分 5 分NT$76NT$60 未稅加入購物車Quick View -
40P 1P-1P (公對公) 公座對公座 線長30CM 杜邦線 杜邦接頭 間距 2.54mm
0 滿分 5 分40P 1P-1P (公對公) 杜邦母座對公座 線長30CM 杜邦線 杜邦接頭 間距 2.54mm
NT$90NT$67 未稅加入購物車Quick View -
9V 電池扣 轉 DC 電源插頭 / 9V 電池連接線 for Arduino
0 滿分 5 分Arduino互動媒體、 32路舵機控制器必備器材,DC插頭內正外負。
9V 電池連接線 for Arduino
NT$19NT$14 未稅加入購物車Quick View -
Arduino 實驗通用零件包
0 滿分 5 分Arduino 實驗通用零件包
有了這款配置好的元件包之後,玩arduino 基本上就不需要再去買什麼零星的電子物料了
NT$143NT$100 未稅加入購物車Quick View -
PL2303HX USB 轉 TTL 序列傳輸線
0 滿分 5 分注意事項: 目前PL2303HX 僅支援Windows XP/Vista/7 和Linux 使用,如果是Windows 8 和Mac 作業系統,需使用 PL2303TA 才能正常使用。
對於所有使用USB轉TTL 下載線的機子,無論是3端的,或是4端5端6端的,都是只需要就3條線的,就是下載線的發送端接機子的接收端(TXD–RXD),下載線的接收端接機子發送端的(RXD–TXD),下載線的地接機子的地(GND–GND)就可以。
NT$76NT$40 未稅加入購物車Quick View -
鱷魚夾 測試線 雙頭 測試線 維修導線 10條一包 50cm
0 滿分 5 分NT$124NT$57 未稅加入購物車Quick View