- 商品說明
商品說明
Qwiic 專用連接線 – 麵包板跳線 (4針)
這是一根跳線適配器電線,其一端端接Qwiic JST凹形連接器,另一端端接麵包板連接尾纖。通過該電線,可以輕鬆地將具有Qwiic連接器的組件連接到麵包板或基於Arduino的設備的引腳上。
28AWG電線的長度為150mm(約5.9英寸)。適配器的電線已顏色編碼為紅色,黑色,藍色和黃色。此外,Qwiic母連接器的基本間距為1mm,而公連接銷可以輕鬆插入標準的0.1“連接器中。
所有Qwiic電纜均具有以下配色方案和佈置:
- 黑色= GND
- 紅色= 3.3V
- 藍色= SDA
- 黃色= SCL
特徵
- 尺寸:150毫米(5.9英寸)長
Documents
=========================================================
Qwiic Cable – Breadboard Jumper (4-pin)
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins.
The 28AWG wire’s length is 150mm (about 5.9 inches). The adapter’s wires have been color coded to red, black, blue and yellow. Additionally, the female Qwiic connector features a basic 1mm pitch, while the male hookup pins can easily insert into a standard 0.1″ connector.
All Qwiic cables have the following color scheme and arrangement:
- Black = GND
- Red = 3.3V
- Blue = SDA
- Yellow = SCL
The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
Features
- Dimensions: 150mm (5.9″) Length
Documents
相關商品
-
加入購物車Quick View
單排排針 直插針 2.54mm間距 1*40P 兩邊一樣長 總針長15mm 麵包板專用 一包2支
0 滿分 5 分Arduino, 樹莓派 GPIO 專用,銜接麵包板與感測器常用雙邊等長排針。一包2支
- 名稱:排針
- 規格:1*40P
- 間距:2.54mm
- 特點:兩邊一樣長
- 材質:銅
- 總針長 15MM
加入購物車Quick View -
Arduino 實驗通用零件包
0 滿分 5 分Arduino 實驗通用零件包
有了這款配置好的元件包之後,玩arduino 基本上就不需要再去買什麼零星的電子物料了
NT$143NT$100 未稅加入購物車Quick View -
Grove – Universal 4 pin connector 通用4針90°端子頭 (10個一包) seeed原廠
0 滿分 5 分NT$76NT$60 未稅加入購物車Quick View -
最新版KWS-MX19 USB電壓電流檢測器 最高檢測電壓30V 電流5A USB3.0(黑色)
0 滿分 5 分NT$219NT$200 未稅加入購物車Quick View -
CSR 4.0 藍芽接收傳輸器 Bluetooth V4.0 USB介面
0 滿分 5 分藍芽裝置種類眾多,並非所有藍芽裝置都可以與CSR藍芽接收器配對使用,本商品不接受相容性問題退換貨 !
NT$143NT$95 未稅加入購物車Quick View -
DC電源轉接板 直流電源模組 紅板
0 滿分 5 分直流電源模組 DC 電源模組 DC 電源轉接板
- 名稱:直流電源轉接板
- 尺寸:2.8cm*1.3cm
- 適用接頭:5.5*2.1mm
- 預留2個單排針焊接孔,直接安裝在洞洞板上,方便測試
- 電源輸出接口:2路VCC,2路GND
NT$52NT$29 未稅加入購物車Quick View -
鱷魚夾 測試線 雙頭 測試線 維修導線 10條一包 50cm
0 滿分 5 分NT$124NT$57 未稅加入購物車Quick View -
加入購物車Quick View
SYB-500 組合型大麵包板 多功能實驗板 優質麵包板 萬能洞洞板 彩條線路板 電路板
0 滿分 5 分加入購物車Quick View -
USB 9V升壓線 5V轉9V 升壓線 支援Arduino 行動電源升壓線
0 滿分 5 分讓您的 Arduino 專案不用擔心電壓不足的情況,透過行動電源或者一般 PC USB 升壓 9V 給 Arduino 外部供電, 您可以使用任何一種大容量的行動電源當呈給 Arduino 的電池供電,穩定的透過 Arduino 5.5×2.1 外部電源接口穩定供電。
NT$95NT$76 未稅加入購物車Quick View -
40P 1P-1P (公對公) 公座對公座 線長30CM 杜邦線 杜邦接頭 間距 2.54mm
0 滿分 5 分40P 1P-1P (公對公) 杜邦母座對公座 線長30CM 杜邦線 杜邦接頭 間距 2.54mm
NT$90NT$67 未稅加入購物車Quick View