- 商品說明
商品說明
Qwiic 專用連接線 – 麵包板跳線 (4針)
這是一根跳線適配器電線,其一端端接Qwiic JST凹形連接器,另一端端接麵包板連接尾纖。通過該電線,可以輕鬆地將具有Qwiic連接器的組件連接到麵包板或基於Arduino的設備的引腳上。
28AWG電線的長度為150mm(約5.9英寸)。適配器的電線已顏色編碼為紅色,黑色,藍色和黃色。此外,Qwiic母連接器的基本間距為1mm,而公連接銷可以輕鬆插入標準的0.1“連接器中。
所有Qwiic電纜均具有以下配色方案和佈置:
- 黑色= GND
- 紅色= 3.3V
- 藍色= SDA
- 黃色= SCL
特徵
- 尺寸:150毫米(5.9英寸)長
Documents
=========================================================
Qwiic Cable – Breadboard Jumper (4-pin)
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins.
The 28AWG wire’s length is 150mm (about 5.9 inches). The adapter’s wires have been color coded to red, black, blue and yellow. Additionally, the female Qwiic connector features a basic 1mm pitch, while the male hookup pins can easily insert into a standard 0.1″ connector.
All Qwiic cables have the following color scheme and arrangement:
- Black = GND
- Red = 3.3V
- Blue = SDA
- Yellow = SCL
The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
Features
- Dimensions: 150mm (5.9″) Length
Documents
相關商品
-
PL2303HX USB 轉 TTL 序列傳輸線
0 滿分 5 分注意事項: 目前PL2303HX 僅支援Windows XP/Vista/7 和Linux 使用,如果是Windows 8 和Mac 作業系統,需使用 PL2303TA 才能正常使用。
對於所有使用USB轉TTL 下載線的機子,無論是3端的,或是4端5端6端的,都是只需要就3條線的,就是下載線的發送端接機子的接收端(TXD–RXD),下載線的接收端接機子發送端的(RXD–TXD),下載線的地接機子的地(GND–GND)就可以。
NT$76NT$40 未稅加入購物車Quick View -
最新版KWS-MX19 USB電壓電流檢測器 最高檢測電壓30V 電流5A USB3.0(黑色)
0 滿分 5 分NT$219NT$200 未稅加入購物車Quick View -
新款PL2303TA USB轉串口模组傳輸線 USB轉 TTL/RS232 支持WIN7
0 滿分 5 分注意!WIN8/WIN10 不支援!
NT$190NT$80 未稅加入購物車Quick View -
Grove – 4x1p公端杜邦線 to Grove 4pin母座連接線 20cm (5條包裝) seeed原廠
0 滿分 5 分5條- Grove- 4x1p公端杜邦線 to Grove 4pin母座連接線
NT$129NT$120 未稅加入購物車Quick View -
9V 電池扣 轉 DC 電源插頭 / 9V 電池連接線 for Arduino
0 滿分 5 分Arduino互動媒體、 32路舵機控制器必備器材,DC插頭內正外負。
9V 電池連接線 for Arduino
NT$19NT$14 未稅加入購物車Quick View -
加入購物車Quick View
PCB 玻璃纖維電路板 萬用板 洞洞板 雙面噴錫板 5×7,7×9,9×15三種尺寸可選
0 滿分 5 分加入購物車Quick View -
40P 1P-1P (公對公) 公座對公座 線長30CM 杜邦線 杜邦接頭 間距 2.54mm
0 滿分 5 分40P 1P-1P (公對公) 杜邦母座對公座 線長30CM 杜邦線 杜邦接頭 間距 2.54mm
NT$90NT$67 未稅加入購物車Quick View -
PCB 玻璃纖維電路板 2x8cm 萬用板 洞洞板 雙面 2*8公分
0 滿分 5 分PCB 玻璃纖維電路板 2x8cm 萬用板 洞洞板 雙面 2*8公分
雙面噴錫板 2*8cm 萬用板 厚1.6mm 玻璃纖維綠油板 2cmx8cm 洞洞板
- 孔中心距:2.54MM
- 孔径:0.95MM
- 厚度:1.6MM
NT$17NT$11 未稅加入購物車Quick View -
40P 1P-1P (母對母) 杜邦母座對母座 線長30CM 杜邦線 杜邦接頭 間距 2.54mm
0 滿分 5 分40P 1P-1P 雙頭 杜邦母座對母座 線長30Cm
NT$90NT$60 未稅加入購物車Quick View -
DC電源轉接板 直流電源模組 紅板
0 滿分 5 分直流電源模組 DC 電源模組 DC 電源轉接板
- 名稱:直流電源轉接板
- 尺寸:2.8cm*1.3cm
- 適用接頭:5.5*2.1mm
- 預留2個單排針焊接孔,直接安裝在洞洞板上,方便測試
- 電源輸出接口:2路VCC,2路GND
NT$52NT$29 未稅加入購物車Quick View