NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
NT$800 未稅
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
尚有庫存
- 商品說明
商品說明
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.
The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer.
Microcontroller features
- STM32L073RZT6 in LQFP64 package
- ARM®32-bit Cortex®-M0+ CPU
- 32 MHz max CPU frequency
- VDD from 1.65 V to 3.6 V
- 192 KB Flash
- 20 KB SRAM
- GPIO (51) with external interrupt capability
- General purpose Timers (4)
- Basic Timers (2)
- Low-power Timer
- SPI (2)
- I2S
- I2C (3)
- USART (4)
- Low-power UART
- USB 2.0 full-speed
- 12-bit ADC with 16 channels
- 12-bit DAC (2) with 1 channel each
- LCD
- Comparators (2)
- RTC
- Capacitive sensing channels (24)
- Random Generator (TRNG for HW entropy)
Nucleo features
- Two types of extension resources
- Arduino Uno Revision 3 connectivity
- STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Selection-mode switch to use the kit as a standalone ST-LINK/V2-1
- Flexible board power supply
- USB VBUS or external source (3.3 V, 5 V, 7 – 12 V)
- Power management access point
- User LED (LD2)
- Two push buttons: USER and RESET
- USB re-enumeration capability: three different interfaces supported on USB
- Virtual Com port
- Mass storage (USB Disk drive) for drag’n’drop programming
- Debug port
Nucleo pinout
Arduino-compatible headers
Morpho headers
These headers give access to all STM32 pins.
相關商品
-
X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
The X-NUCLEO-IDS01A5 is an evaluation board based on SPIRIT1 RF module SPSGRF-915 to allow expansion of STM32 Nucleo boards. The SPSGRF-915 module operates in the 915 MHz ISM band and is FCC certified (FCC ID: S9NSPSGRF) and IC certified (IC:8976C-SPSGRF). Identification of the operating frequency of the X-NUCLEO-IDS01Ax (x= 4 or 5) is performed through two resistors (R14 and R15). It is compatible with the ST Morpho and Arduino UNO R3 connector layout. The X-NUCLEO-IDS01A5 interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.
NT$848NT$724 未稅加入購物車Quick View -
STM32 Nucleo-144 Board F429ZI 2M Flash 開發板
0 滿分 5 分NT$1,800NT$1,220 未稅加入購物車Quick View -
機械手臂 DIY 二自由度舵機支架套件 機械手臂,機器人開發用
0 滿分 5 分機械手臂 DIY 舵機雲台支架二自由度機械手機器人配件舵機支架套裝
MG-995 二自由度舵機雲台是一款大扭矩、高性價比的小型雲台,可以在水平和垂直方向做二自由度運動,方便安裝攝像頭,可以實現圖像監控、圖像識別定位追踪;加裝紅外傳感器或超聲波測距傳感器可以組合成一體化探測裝置,使機器人能感測周圍障礙物,從而實現機器人避障功能。當然也可以安裝各種傳感器,通過舵機控制器完成各種新穎的互動作品。
NT$619NT$524 未稅加入購物車Quick View -
加入購物車Quick View
STM32 Nucleo-64 MCU Development Board NUCLEO-L452RE
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
NUCLEO-L476RG STM32 開發板 原裝意法半導體進口 Arduino 相容腳座
0 滿分 5 分加入購物車Quick View -
X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 RF 無線射頻模組
X-NUCLEO-IDS01A4是ST公司推出的一款針對STM32 Nucleo設計的射頻擴展板,兼容Arduino UNO R3接口,通過SPI和GPIO與MCU進行通信。 採用SPIRIT射頻模塊SPSGRF-868,該模塊工作在868MHz的ISM頻段,集成巴倫與片上天線,通過ETSI認證。ST公司同時也提供了STM32Cube的軟件擴展包X-CUBE-SUBG1,降低了開發門檻,方便用戶在不同MCU系列中進行程序移植。
加入購物車Quick View -
X-NUCLEO-IKS01A2 MEMS及環境傳感器擴展板
0 滿分 5 分X-NUCLEO-IKS01A2 MEMS及環境傳感器擴展板
Motion MEMS and environmental sensor expansion board for STM32 Nucleo
X-Nucleo-IKS01A2與X-Nucleo-IKS01A1在接口上完全一致,採用Arduino UNO R3接口與其他Nucleo板相連。X-Nucleo-IKS01A2採用了全新的三軸加速度計加三軸陀螺儀(A+G),三軸加速度加三軸磁力計(A+M)以及MEMS氣壓計,所有傳感器通過同一I2C接口與主控板相連。保留了DIL24socket,便於評測其他型號的傳感器。NT$933NT$800 未稅加入購物車Quick View -
加入購物車Quick View
SeeedStudio BeagleBone Green 綠色 狗骨頭 單板電腦 ARM開發板 兼容Grove傳感器
0 滿分 5 分BeagleBone Black 及 Seeed’s Grove 著力開發的BeagleBone Green 承襲 BeagleBoard 家族的設計特性:體積小性能強大,可擴充性強。
Beaglebone 運行的是完整的Linux 操作系統,代碼的編寫編譯都可以在本地進行,而且可以使用的語言種類繁多。例如,常用的C 、C++ 、Python 、Perl 都可以用來為Beaglebone 編程。不像Arduino ,只是一個最基本的單片機,程序的編寫、編譯都是在計算機上進行,而且調試非常困難。不僅如此,Beaglebone 自帶了基於Web 的Cloud9 編輯器,這使得你只要有電腦和瀏覽器,就可以為Beaglebone 編程。
備註: 有客戶問到原廠影片中 Green 為測試模型,所以有鈕釦型電池座的設計,但最終銷售版本是沒有的喔。
請參考 官方網站上影片文件說明中後面有備註 Note: The RTC battery was removed from the final design. http://beagleboard.org/green
加入購物車Quick View -
加入購物車Quick View
NUCLEO-F401RE STM32F401RE 開發板 原裝意法半導體進口
0 滿分 5 分NUCLEO-F401RE STM32F401RE 開發板 原裝意法半導體進口
STM32 Nucleo開發板具有mbed功能,支持Arduino接口,同時還提供ST Morpho擴展排針,可連接微控制器的所有周邊外設。作為一個具有mbed功能的電路板,STM32 Nucleo開發板讓開發人員能夠利用mbed開源軟件平台、在線工具和mbed.org的合作基礎設施開發創新應用。
加入購物車Quick View -
ODYSSEY-STM32MP135D 內建4GB eMMC 開發板 Cortex-A7 STM32 / 4Gb / PoE
0 滿分 5 分這是新一款緊湊型STM32 單片機開發板,支持多種操作系統並提供多種連接,具有高效的數據傳輸和靈活的供電、並有可擴充的存儲容量。
NT$1,810NT$1,600 未稅加入購物車Quick View