NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
NT$800 未稅
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
尚有庫存
- 商品說明
商品說明
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.
The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer.
Microcontroller features
- STM32L073RZT6 in LQFP64 package
- ARM®32-bit Cortex®-M0+ CPU
- 32 MHz max CPU frequency
- VDD from 1.65 V to 3.6 V
- 192 KB Flash
- 20 KB SRAM
- GPIO (51) with external interrupt capability
- General purpose Timers (4)
- Basic Timers (2)
- Low-power Timer
- SPI (2)
- I2S
- I2C (3)
- USART (4)
- Low-power UART
- USB 2.0 full-speed
- 12-bit ADC with 16 channels
- 12-bit DAC (2) with 1 channel each
- LCD
- Comparators (2)
- RTC
- Capacitive sensing channels (24)
- Random Generator (TRNG for HW entropy)
Nucleo features
- Two types of extension resources
- Arduino Uno Revision 3 connectivity
- STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Selection-mode switch to use the kit as a standalone ST-LINK/V2-1
- Flexible board power supply
- USB VBUS or external source (3.3 V, 5 V, 7 – 12 V)
- Power management access point
- User LED (LD2)
- Two push buttons: USER and RESET
- USB re-enumeration capability: three different interfaces supported on USB
- Virtual Com port
- Mass storage (USB Disk drive) for drag’n’drop programming
- Debug port
Nucleo pinout
Arduino-compatible headers
Morpho headers
These headers give access to all STM32 pins.
相關商品
-
ODYSSEY-STM32MP135D 內建4GB eMMC 開發板 Cortex-A7 STM32 / 4Gb / PoE
0 滿分 5 分這是新一款緊湊型STM32 單片機開發板,支持多種操作系統並提供多種連接,具有高效的數據傳輸和靈活的供電、並有可擴充的存儲容量。
NT$1,810NT$1,600 未稅加入購物車Quick View -
加入購物車Quick View
X-NUCLEO-IDB05A1 EXPANSION BOARD, 藍芽擴充板 BLUETOOTH LOW ENERGY
0 滿分 5 分The X-NUCLEO-IDB05A1 is a Bluetooth low energy expansion board based on the SPBTLE-RF module for STM32 Nucleo. The X-NUCLEO-IDB05A1 is a Bluetooth Low Energy evaluation board based on the SPBTLE-RF BlueNRG-MS RF module to allow expansion of the STM32 Nucleo boards. The SPBTLE-RF module is FCC (FCC ID: S9NSPBTLERF) and IC certified (IC: 8976C-SPBTLERF). The X-NUCLEO-IDB05A1 is compatible with the ST Morpho and Arduino UNO R3 connector layout. The X-NUCLEO-IDB05A1 interfaces with the STM32 microcontroller via the SPI pin and the user can change the default SPI clock, the SPI chip select and SPI IRQ by changing one resistor on the evaluation board.
加入購物車Quick View -
BeagleBone Green Wireless 狗骨頭無線版 Wi-Fi + Bluetooth Low Energy
0 滿分 5 分BeagleBone Green Wireless 狗骨頭無線版 Wi-Fi + Bluetooth Low Energy
板載了2.4GHz 2×2 MIMO Wi-Fi和低功耗藍牙模塊的BeagleBone Green Wireless。對於物聯網開發者來說,它或許是比樹莓派3更加合適的硬體平台。值得一提的是,TI WiLinkTM8支持AP和STA模式,在配置無線網絡的時候會相當給力;而它的藍牙模塊也支持A2DP,可用於音頻自動化和立體聲傳輸。
加入購物車Quick View -
STM32F103C8T6 小系統板 單片機 核心板 STM32開發板 ARM
0 滿分 5 分加入購物車Quick View -
X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
The X-NUCLEO-IDS01A5 is an evaluation board based on SPIRIT1 RF module SPSGRF-915 to allow expansion of STM32 Nucleo boards. The SPSGRF-915 module operates in the 915 MHz ISM band and is FCC certified (FCC ID: S9NSPSGRF) and IC certified (IC:8976C-SPSGRF). Identification of the operating frequency of the X-NUCLEO-IDS01Ax (x= 4 or 5) is performed through two resistors (R14 and R15). It is compatible with the ST Morpho and Arduino UNO R3 connector layout. The X-NUCLEO-IDS01A5 interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.
NT$848NT$720 未稅加入購物車Quick View -
X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 RF 無線射頻模組
X-NUCLEO-IDS01A4是ST公司推出的一款針對STM32 Nucleo設計的射頻擴展板,兼容Arduino UNO R3接口,通過SPI和GPIO與MCU進行通信。 採用SPIRIT射頻模塊SPSGRF-868,該模塊工作在868MHz的ISM頻段,集成巴倫與片上天線,通過ETSI認證。ST公司同時也提供了STM32Cube的軟件擴展包X-CUBE-SUBG1,降低了開發門檻,方便用戶在不同MCU系列中進行程序移植。
加入購物車Quick View -
加入購物車Quick View
STMicroelectronics NUCLEO-F413ZH 開發板
0 滿分 5 分加入購物車Quick View -
Teensy 3.2 ARM Cortex-M4 Dev Board SparkFun原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
NUCLEO-F103RB STM32F103RB 128K Mbed 開發板 原裝意法半導體進口 Arduino 相容腳座
0 滿分 5 分NUCLEO-F103RB STM32F103RB 128K Mbed 開發板 原裝意法半導體進口 Arduino 相容腳座
STM32 Nucleo-64開發板採用 STM32F103RB MCU,支持Arduino和ST形態連接。STM32 Nucleo板為用戶提供了一種經濟實惠且靈活的方式,可以從STM32微控制器中嘗試新的概念並構建原型,從性能,功耗和功能的各種組合中進行選擇。Arduino™Uno V3連接支持和ST morpho頭部允許輕鬆擴展STM32 Nucleo開放平台的功能
加入購物車Quick View -
升級版 6軸機械手臂 開發套件組 6DOF Robot ARM
0 滿分 5 分6軸機械人手臂開發套件被廣泛應用於教學領域,適合個人DIY 制作以及學校創意項目之中,可以把它看作是一個簡單的多軸機械手臂演示平台,它的動力系統由6個伺服電機組成,可以實現機械手的前後、上下及左右抓取搬運的演示。所以支架配件均采用2mm厚度的鋁板,從而有效的提高了機械手自身的穩定性,舵機配MG996大扭力金屬舵機,使輸出更加穩定,轉向關節處均採用進口杯式軸承,不僅可以使轉向更加靈活,而且還可以使舵機的轉向在同一圓心。
NT$2,857NT$2,200 未稅加入購物車Quick View