NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
NT$800 未稅
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
尚有庫存
- 商品說明
商品說明
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.
The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer.
Microcontroller features
- STM32L073RZT6 in LQFP64 package
- ARM®32-bit Cortex®-M0+ CPU
- 32 MHz max CPU frequency
- VDD from 1.65 V to 3.6 V
- 192 KB Flash
- 20 KB SRAM
- GPIO (51) with external interrupt capability
- General purpose Timers (4)
- Basic Timers (2)
- Low-power Timer
- SPI (2)
- I2S
- I2C (3)
- USART (4)
- Low-power UART
- USB 2.0 full-speed
- 12-bit ADC with 16 channels
- 12-bit DAC (2) with 1 channel each
- LCD
- Comparators (2)
- RTC
- Capacitive sensing channels (24)
- Random Generator (TRNG for HW entropy)
Nucleo features
- Two types of extension resources
- Arduino Uno Revision 3 connectivity
- STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Selection-mode switch to use the kit as a standalone ST-LINK/V2-1
- Flexible board power supply
- USB VBUS or external source (3.3 V, 5 V, 7 – 12 V)
- Power management access point
- User LED (LD2)
- Two push buttons: USER and RESET
- USB re-enumeration capability: three different interfaces supported on USB
- Virtual Com port
- Mass storage (USB Disk drive) for drag’n’drop programming
- Debug port
Nucleo pinout
Arduino-compatible headers
Morpho headers
These headers give access to all STM32 pins.
相關商品
-
X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 RF 無線射頻模組
X-NUCLEO-IDS01A4是ST公司推出的一款針對STM32 Nucleo設計的射頻擴展板,兼容Arduino UNO R3接口,通過SPI和GPIO與MCU進行通信。 採用SPIRIT射頻模塊SPSGRF-868,該模塊工作在868MHz的ISM頻段,集成巴倫與片上天線,通過ETSI認證。ST公司同時也提供了STM32Cube的軟件擴展包X-CUBE-SUBG1,降低了開發門檻,方便用戶在不同MCU系列中進行程序移植。
加入購物車Quick View -
新版STM32F103C8T6 (103C6T6) 核心板 STM32開發板 原廠晶片 ARM嵌入式單片機 相容Arduino
0 滿分 5 分皆已焊針腳
加入購物車Quick View -
加入購物車Quick View
MicroMod Artemis 處理器 ARM Cortex-M4F Sparkfun原廠
0 滿分 5 分加入購物車Quick View -
X-NUCLEO-IDW01M1 WiFi 擴展板 SWPF01SA module STM32 Nucleo
0 滿分 5 分X-NUCLEO-IDW01M1 Wi-Fi擴展板SWPF01SA module STM32 Nucleo
Expansion Boards 用於:STM32 Nucleo 核心:ARM Cortex M3 數據匯流排寬度:32 bit 描述/功能:Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo 接口。
- 產品: Expansion Boards
- 用於: STM32 Nucleo
- 核心: ARM Cortex M3
- 數據匯流排寬度: 32 bit
- 描述/功能: Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo
- 接口類型: UART
- 最高工作溫度: + 85 C
- 最低工作溫度: – 40 C
- 系列: STM32 NUCLEO
- 評估工具: SWPF01SA
加入購物車Quick View -
X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
The X-NUCLEO-IDS01A5 is an evaluation board based on SPIRIT1 RF module SPSGRF-915 to allow expansion of STM32 Nucleo boards. The SPSGRF-915 module operates in the 915 MHz ISM band and is FCC certified (FCC ID: S9NSPSGRF) and IC certified (IC:8976C-SPSGRF). Identification of the operating frequency of the X-NUCLEO-IDS01Ax (x= 4 or 5) is performed through two resistors (R14 and R15). It is compatible with the ST Morpho and Arduino UNO R3 connector layout. The X-NUCLEO-IDS01A5 interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.
NT$848NT$720 未稅加入購物車Quick View -
加入購物車Quick View
STM32 Nucleo-64 MCU Development Board NUCLEO-L452RE
0 滿分 5 分加入購物車Quick View -
BeagleBone Green Wireless 狗骨頭無線版 Wi-Fi + Bluetooth Low Energy
0 滿分 5 分BeagleBone Green Wireless 狗骨頭無線版 Wi-Fi + Bluetooth Low Energy
板載了2.4GHz 2×2 MIMO Wi-Fi和低功耗藍牙模塊的BeagleBone Green Wireless。對於物聯網開發者來說,它或許是比樹莓派3更加合適的硬體平台。值得一提的是,TI WiLinkTM8支持AP和STA模式,在配置無線網絡的時候會相當給力;而它的藍牙模塊也支持A2DP,可用於音頻自動化和立體聲傳輸。
加入購物車Quick View -
Teensy 3.2 ARM Cortex-M4 Dev Board SparkFun原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
STMicroelectronics NUCLEO-F413ZH 開發板
0 滿分 5 分加入購物車Quick View -
STM32F103C8T6 小系統板 單片機 核心板 STM32開發板 ARM
0 滿分 5 分加入購物車Quick View