MPL3115A2 高度壓力感測器模組 Altitude/Pressure Sensor Breakout SparkFun原廠
NT$580 未稅
MPL3115A2 是一個MEMS壓力傳感器,可將海拔數據提供到30厘米以內(採用過採樣)。
尚有庫存
- 商品說明
商品說明
MPL3115A2 高度壓力感測器模組 Altitude/Pressure Sensor Breakout
MPL3115A2 是一個MEMS壓力傳感器,可將海拔數據提供到30厘米以內(採用過採樣)。傳感器輸出由高分辨率24位ADC數字化,並通過I2C傳輸,這意味著與大多數控制器的接口很容易。壓力輸出可以通過Pascal分數的輸出來解決,海拔高度可以以分米計算。該器件還以攝氏度提供12位溫度測量。
特徵
- 1.95V至3.6V電源電壓,由LDO內部調節
- 1.6V至3.6V數字接口電源電壓
- 內部全面補償
- 直接閱讀,補償
- 壓力:20位測量(帕斯卡)
- 海拔高度:20位測量(米)
- 溫度:12位測量(攝氏度)
- 可編程事件
- 自主數據採集
- 分辨率低至1英尺/ 30厘米
- 32採樣FIFO
- 使用FIFO記錄數據最多12天的能力
- 1秒至9小時數據採集率
- I2C數字輸出接口(工作頻率高達400 kHz)
Documents
=========================================================
SparkFun Altitude/Pressure Sensor Breakout – MPL3115A2
Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it’s easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius.
This breakout board makes it easy to prototype using this tiny device by breaking out the necessary pins to a standard 0.1″ spaced header. The board also has all of the passive components needed to get the device functioning, so you can simply connect it to something that talks I2C and get to work!
Features:
- 1.95V to 3.6V Supply Voltage, internally regulated by LDO
- 1.6V to 3.6V Digital Interface Supply Voltage
- Fully Compensated internally
- Direct Reading, Compensated
- Pressure: 20-bit measurement (Pascals)
- Altitude: 20-bit measurement (meters)
- Temperature: 12-bit measurement (degrees Celsius)
- Programmable Events
- Autonomous Data Acquisition
- Resolution down to 1 ft. / 30 cm
- 32 Sample FIFO
- Ability to log data up to 12 days using the FIFO
- 1 second to 9 hour data acquisition rate
- I2C digital output interface (operates up to 400 kHz)
Documents:
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (MPL3115A2)
- GitHub (Design Files & Example Code)
- GitHub (Library)
- Product Video
相關商品
-
Gravity: Analog Turbidity Sensor 水濁度感測器 水質檢測 養殖環境監測 For Arduino DFRobot原廠
0 滿分 5 分濁度感測器利用光學原理,通過測量溶液中的透光率和散射率來綜合判斷溶液濁度情況,從而達到檢測水質的目的。
NT$648NT$500 未稅加入購物車Quick View -
Analog pH Meter Pro Sensor 模擬檢測 PH值(專業版) 相容Arduino DFRobot原廠
0 滿分 5 分NT$2,667NT$2,460 未稅加入購物車Quick View -
Grove – Alcohol Sensor 酒精感測器 seeed原廠
0 滿分 5 分酒精感測器(傳感器)為酒精專用檢測半導體傳感器。它具有良好的靈敏度和回應速度快的特性,本模組適用用於開發便攜式酒精檢測系統。
NT$286NT$220 未稅加入購物車Quick View -
Grove – PIR Motion Sensor 紅外線人體移動探測感測器 seeed原廠
0 滿分 5 分這是一個極易使用的紅外線 PIR人體運動探測感測器。通過這個感測器,你可以使你的作品對運動,例如人類的運動作出互動。只要將其接到Grove – Base Shield上,並且下載程序,當有人走入它的探測範圍時,PIR運動探測傳感器就會在它的SIG腳上輸出一個HIGH信號。
NT$333NT$260 未稅加入購物車Quick View -
高感度麥克風感測器模組
0 滿分 5 分NT$62NT$38 未稅加入購物車Quick View -
2串 7.4V 聚合物鋰電池組保護板 大電流2串保護板
0 滿分 5 分NT$76NT$57 未稅加入購物車Quick View -
FlexiForce 壓力感測器 – 1磅 SparkFun原廠
0 滿分 5 分
NT$781NT$740 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ5) 氣體感測器 Seeed原廠
0 滿分 5 分可檢測液化石油氣,天然氣,城鎮煤氣等。基於其快速響應時間,測量可以盡快進行。且其靈敏度也可以通過電位器來進行調節。
NT$276NT$220 未稅加入購物車Quick View -
加入購物車Quick View
Gravity: I2C 非接觸式紅外線溫度感測器 MLX90614 for Arduino DFRobot原廠
0 滿分 5 分加入購物車Quick View -
電流轉電壓模組 0/4-20mA 轉 0-3.3V、5V、10V 電壓變送器 信號轉換調理
0 滿分 5 分在電路信號傳輸的過程中電壓信號會隨著傳輸距離的增加而變弱,採用電流傳輸可以避免信號的變弱。
本模組用於電流信號傳輸末端,將信號轉換成電壓信號供單片機檢測。
電流輸入支援4-20Ma、0-20mA,電壓輸出支援0-3.3V、0-5V、0-10V
NT$190NT$114 未稅加入購物車Quick View