MI:pro Micro:bit BBC 專用機殼 SparkFun原廠
NT$190 未稅
尚有庫存
- 商品說明
商品說明
MI:pro Micro:bit 專用機殼
MI:pro Micro:bit BBC 專用機殼 是一種 Micro:bit 專用的保護盒:這些情況具有三層結構風格,能夠將整個 Micro:bit 組件牆壁安裝到任何您想要的表面上,同時還將所有 micro:bit上的所有按鈕和端口引出。
不包含 MICOR:BIT 開發板,需另外購買。
結構簡單,只需要一個小的平頭螺絲刀,並且包括將每個板在微型鑽頭周圍彼此疊置並將其擰緊到位。幸運的是,MI:pro 機殼 可以輕鬆接觸micro:bit底部的邊緣引腳,使其仍可插入許多載板上的邊緣連接器。唯一不能與MI:pro案例一起使用的板子是SparkFun遊戲玩家:由於其邊緣連接器位於板的中心位置。
出貨清單
- 1x前板
- 1x背面安裝板
- 2x中層板
- 4x M3尼龍機用螺絲
- 4x M3尼龍全螺母
Documents
=========================================================
MI:pro Mountable Case for micro:bit
The Mountable MI:pro is a simple and compact protective case for the micro:bit. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro:bit. Though these cases do feature wall-mountable tabs, the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro:bit.
Construction is simple, requiring only a small flathead screwdriver, and involves layering each plate on top of one another around the micro:bit and screwing it into place. Luckily, the MI:pro case enables easy access to the edge pins at the bottom of the micro:bit, allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI:pro case is the SparkFun gamer:bit due to its edge connector being located in the center of the board.
Note: The MI:pro case only includes the parts found in the Includes Tab. This case does NOTinclude a micro:bit, power source or mounting screws. These items will need to be purchased separately.
Includes
- 1x Front Plate
- 1x Back Mounting Plate
- 2x Mid-layer Plate
- 4x M3 Nylon Machine Screw
- 4x M3 Nylon Full Nut
Documents
相關商品
-
加入購物車Quick View
Interface Cable U.FL to SMA母頭 連接線 Sparkfun原廠
0 滿分 5 分加入購物車Quick View -
SparkFun Micro:climate kit for micro:bit v3.0氣候開發系統套件 風力,風速,風向,降雨量,溫濕度 全方案氣象站開發套件
0 滿分 5 分氣候開發系統套件內容物不包含電池和micro:bit 開發板
我們已經看到興趣愛好者,學生和科學家們興致勃勃地興建了一個DIY氣象站,以便跟踪每天在地球上發生的事情。微型氣候工具包是一個氣候站套件,建立在廉價,易於使用的 Micro:bit 和Microsoft MakeCode之上。我們還撰寫了七個實驗,介紹如何使用套件的每個組件以及如何使用micro:bit和Microsoft MakeCode。我們甚至包括一個額外的實驗,包括兩個微位置之間的無線通信,以便能夠在不暴露天氣的情況下監視天氣。
NT$5,238NT$4,280 未稅加入購物車Quick View -
Environmental Combo Breakout – CCS811/BME280 (Qwiic) SparkFun原廠
0 滿分 5 分SparkFun CCS811 / BME280環境組合突破將流行的CCS811和BME280 IC用於您所有的大氣質量傳感需求。
NT$1,505NT$1,240 未稅加入購物車Quick View -
HMC6343 Breakout 電子羅盤模組 SparkFun原廠
0 滿分 5 分HMC6343是一款完全集成的高端電子羅盤模塊,可以計算並在幾度內為您提供精確的航向。
加入購物車Quick View -
BBC micro:bit 編程入門開發板 micro bit V2.2 開發板
0 滿分 5 分micro:bit是專為兒童編程教育和運用科技知識解決問題而設計開發的微型電腦。
NT$800NT$700 未稅加入購物車Quick View -
加入購物車Quick View
SoftPot Membrane Potentiometer – 50mm 電位器 50毫米 SparkFun原廠
0 滿分 5 分這些是非常薄的可變電位器。 通過按壓條的各個部分,電阻線性地從100歐姆變化到10,000歐姆,允許用戶非常精確地計算條上的相對位置。
加入購物車Quick View -
Humidity and Temperature Sensor Breakout – HIH6130 溫濕度感測器模組 SparkFun原廠
0 滿分 5 分HIH6130是一款數字輸出型相對濕度(RH)和溫度傳感器,採用相同的封裝。 這樣可以對RH測量進行溫度補償,並提供第二個獨立的溫度傳感器輸出。
NT$1,143NT$960 未稅加入購物車Quick View -
加入購物車Quick View
Max:bot DIY 可編程機器人套件 附micro:bit主板 DFRobot原廠
0 滿分 5 分Max:Bot入門級DIY機器人,可最大限度地發揮兒童的創造力
是一款可編程玩具,適合8歲以上的孩子學習機器人技術。
加入購物車Quick View -
micro:bot kit for micro:bit-v2.0 機器人自走車套件 SparkFun原廠
0 滿分 5 分Micro:bit 是學習如何構建和編程機器人的完美控制器!將Micro:bit 與SparkFun moto:bit 擴展板相結合,為機器人愛好者創造了一個靈活的低成本機器人平台!使用SparkFun Micro:bit 機器人自走車套件,您可以快速創建簡單的機器人,而無需花費數小時的時間學習如何構建和編程機器人。
注意!本套件不含 Micro:bit 開發板,您如果沒有需要額外加購。
加入購物車Quick View -
加入購物車Quick View
Electret Microphone Breakout 駐極體 麥克風放大模組 SparkFun原廠
0 滿分 5 分這個小型分線板將一個駐極體麥克風(100Hz-10kHz)與一個60x麥克風前置放大器連接起來,放大聲音,拍子,門鈴或任何足夠大的聲音,以便被微控制器的模數轉換器拾取。
加入購物車Quick View