MI:pro Micro:bit BBC 專用機殼 SparkFun原廠
NT$190 未稅
尚有庫存
- 商品說明
商品說明
MI:pro Micro:bit 專用機殼
MI:pro Micro:bit BBC 專用機殼 是一種 Micro:bit 專用的保護盒:這些情況具有三層結構風格,能夠將整個 Micro:bit 組件牆壁安裝到任何您想要的表面上,同時還將所有 micro:bit上的所有按鈕和端口引出。
不包含 MICOR:BIT 開發板,需另外購買。
結構簡單,只需要一個小的平頭螺絲刀,並且包括將每個板在微型鑽頭周圍彼此疊置並將其擰緊到位。幸運的是,MI:pro 機殼 可以輕鬆接觸micro:bit底部的邊緣引腳,使其仍可插入許多載板上的邊緣連接器。唯一不能與MI:pro案例一起使用的板子是SparkFun遊戲玩家:由於其邊緣連接器位於板的中心位置。
出貨清單
- 1x前板
- 1x背面安裝板
- 2x中層板
- 4x M3尼龍機用螺絲
- 4x M3尼龍全螺母
Documents
=========================================================
MI:pro Mountable Case for micro:bit
The Mountable MI:pro is a simple and compact protective case for the micro:bit. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro:bit. Though these cases do feature wall-mountable tabs, the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro:bit.
Construction is simple, requiring only a small flathead screwdriver, and involves layering each plate on top of one another around the micro:bit and screwing it into place. Luckily, the MI:pro case enables easy access to the edge pins at the bottom of the micro:bit, allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI:pro case is the SparkFun gamer:bit due to its edge connector being located in the center of the board.
Note: The MI:pro case only includes the parts found in the Includes Tab. This case does NOTinclude a micro:bit, power source or mounting screws. These items will need to be purchased separately.
Includes
- 1x Front Plate
- 1x Back Mounting Plate
- 2x Mid-layer Plate
- 4x M3 Nylon Machine Screw
- 4x M3 Nylon Full Nut
Documents
相關商品
-
Micro:bit 3號 雙AA 電池盒 電池座 – 2xAA(JST-PH)
0 滿分 5 分獨特的 雙電池 AA 電池座,專為 BBC micro:bit 而專門製造。
NT$57NT$40 未稅加入購物車Quick View -
HMC6343 Breakout 電子羅盤模組 SparkFun原廠
0 滿分 5 分HMC6343是一款完全集成的高端電子羅盤模塊,可以計算並在幾度內為您提供精確的航向。
加入購物車Quick View -
BBC Micro:Bit 2節開關電池座 3AAA 4號電池盒 Sparkfun原廠
0 滿分 5 分NT$76NT$60 未稅加入購物車Quick View -
加入購物車Quick View
SoftPot Membrane Potentiometer – 500mm 電位器 SparkFun原廠
0 滿分 5 分這些是非常薄的可變電位器。 通過按壓條的各個部分,電阻線性地從100歐姆變化到10,000歐姆,允許用戶非常精確地計算條上的相對位置。
加入購物車Quick View -
Humidity and Temperature Sensor Breakout – HIH6130 溫濕度感測器模組 SparkFun原廠
0 滿分 5 分HIH6130是一款數字輸出型相對濕度(RH)和溫度傳感器,採用相同的封裝。 這樣可以對RH測量進行溫度補償,並提供第二個獨立的溫度傳感器輸出。
NT$1,143NT$960 未稅加入購物車Quick View -
加入購物車Quick View
Coulomb Counter Breakout – LTC4150 庫倫計數器 模組 電流監控 SparkFun原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
Humidity Sensor Breakout – HIH-4030 濕度感測器/傳感器 SparkFun原廠
0 滿分 5 分這是霍尼韋爾HIH-4030濕度傳感器的分線板。 HIH-4030測量相對濕度(%RH)並將其作為模擬輸出電壓輸出。 您可以將傳感器的輸出直接連接到微控制器上的ADC; 並且,由於傳感器接近線性電壓輸出,數據非常易於處理。
加入購物車Quick View -
SparkFun Micro:climate kit for micro:bit v3.0氣候開發系統套件 風力,風速,風向,降雨量,溫濕度 全方案氣象站開發套件
0 滿分 5 分氣候開發系統套件內容物不包含電池和micro:bit 開發板
我們已經看到興趣愛好者,學生和科學家們興致勃勃地興建了一個DIY氣象站,以便跟踪每天在地球上發生的事情。微型氣候工具包是一個氣候站套件,建立在廉價,易於使用的 Micro:bit 和Microsoft MakeCode之上。我們還撰寫了七個實驗,介紹如何使用套件的每個組件以及如何使用micro:bit和Microsoft MakeCode。我們甚至包括一個額外的實驗,包括兩個微位置之間的無線通信,以便能夠在不暴露天氣的情況下監視天氣。
NT$5,238NT$4,280 未稅加入購物車Quick View -
Micro:bit 入門學習套件 Inventor’s Kit for micro:bit SparkFun原廠
0 滿分 5 分micro:bit主板 有V1.5 / V2.0 兩種版本可供選擇
加入購物車Quick View -
加入購物車Quick View
Interface Cable U.FL to SMA母頭 連接線 Sparkfun原廠
0 滿分 5 分加入購物車Quick View