MI:pro Micro:bit BBC 專用機殼 SparkFun原廠
NT$190 未稅
尚有庫存
- 商品說明
商品說明
MI:pro Micro:bit 專用機殼
MI:pro Micro:bit BBC 專用機殼 是一種 Micro:bit 專用的保護盒:這些情況具有三層結構風格,能夠將整個 Micro:bit 組件牆壁安裝到任何您想要的表面上,同時還將所有 micro:bit上的所有按鈕和端口引出。
不包含 MICOR:BIT 開發板,需另外購買。
結構簡單,只需要一個小的平頭螺絲刀,並且包括將每個板在微型鑽頭周圍彼此疊置並將其擰緊到位。幸運的是,MI:pro 機殼 可以輕鬆接觸micro:bit底部的邊緣引腳,使其仍可插入許多載板上的邊緣連接器。唯一不能與MI:pro案例一起使用的板子是SparkFun遊戲玩家:由於其邊緣連接器位於板的中心位置。
出貨清單
- 1x前板
- 1x背面安裝板
- 2x中層板
- 4x M3尼龍機用螺絲
- 4x M3尼龍全螺母
Documents
=========================================================
MI:pro Mountable Case for micro:bit
The Mountable MI:pro is a simple and compact protective case for the micro:bit. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro:bit. Though these cases do feature wall-mountable tabs, the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro:bit.
Construction is simple, requiring only a small flathead screwdriver, and involves layering each plate on top of one another around the micro:bit and screwing it into place. Luckily, the MI:pro case enables easy access to the edge pins at the bottom of the micro:bit, allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI:pro case is the SparkFun gamer:bit due to its edge connector being located in the center of the board.
Note: The MI:pro case only includes the parts found in the Includes Tab. This case does NOTinclude a micro:bit, power source or mounting screws. These items will need to be purchased separately.
Includes
- 1x Front Plate
- 1x Back Mounting Plate
- 2x Mid-layer Plate
- 4x M3 Nylon Machine Screw
- 4x M3 Nylon Full Nut
Documents
相關商品
-
英國BBC micro:bit V1.5版本 微型電腦開發板 盒裝
0 滿分 5 分以ARM Cortex M0處理器為基礎,配置用來顯示資訊的5×5點陣LED,同時還內建了低功藍牙、電子羅盤、溫度光線傳感器、加速度計等,操作時不需要安裝驅動程式,就能直接與電腦連結進行學習。支援微軟開發的線上圖形化編程工具,無需下載程式編輯器。Blocks Editor可以在Windows、MacOS、iOS與Android系統下使用,同時支援無線燒錄。支援Python來撰寫程式。
NT$667NT$480 未稅加入購物車Quick View -
加入購物車Quick View
Piezo Vibration Sensor – Small Vertical 垂直接角壓電振動感測器 SparkFun原廠
0 滿分 5 分Measurement Specialties的Minisense 100是一款低成本的懸臂式振動傳感器,通過質量負載,在低頻時提供高靈敏度。
加入購物車Quick View -
加入購物車Quick View
Coulomb Counter Breakout – LTC4150 庫倫計數器 模組 電流監控 SparkFun原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
Interface Cable U.FL to SMA母頭 連接線 Sparkfun原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
Humidity Sensor Breakout – HIH-4030 濕度感測器/傳感器 SparkFun原廠
0 滿分 5 分這是霍尼韋爾HIH-4030濕度傳感器的分線板。 HIH-4030測量相對濕度(%RH)並將其作為模擬輸出電壓輸出。 您可以將傳感器的輸出直接連接到微控制器上的ADC; 並且,由於傳感器接近線性電壓輸出,數據非常易於處理。
加入購物車Quick View -
Humidity and Temperature Sensor Breakout – HIH6130 溫濕度感測器模組 SparkFun原廠
0 滿分 5 分HIH6130是一款數字輸出型相對濕度(RH)和溫度傳感器,採用相同的封裝。 這樣可以對RH測量進行溫度補償,並提供第二個獨立的溫度傳感器輸出。
NT$1,143NT$960 未稅加入購物車Quick View -
加入購物車Quick View
SoftPot Membrane Potentiometer – 200mm 工業移動 傳感器 感測器 SparkFun原廠
0 滿分 5 分這些是非常薄的可變電位器。 通過按壓條的各個部分,電阻線性地從100歐姆變化到10,000歐姆,允許用戶非常精確地計算條上的相對位置。
加入購物車Quick View -
加入購物車Quick View
Electret Microphone Breakout 駐極體 麥克風放大模組 SparkFun原廠
0 滿分 5 分這個小型分線板將一個駐極體麥克風(100Hz-10kHz)與一個60x麥克風前置放大器連接起來,放大聲音,拍子,門鈴或任何足夠大的聲音,以便被微控制器的模數轉換器拾取。
加入購物車Quick View -
micro:bot kit for micro:bit-v2.0 機器人自走車套件 SparkFun原廠
0 滿分 5 分Micro:bit 是學習如何構建和編程機器人的完美控制器!將Micro:bit 與SparkFun moto:bit 擴展板相結合,為機器人愛好者創造了一個靈活的低成本機器人平台!使用SparkFun Micro:bit 機器人自走車套件,您可以快速創建簡單的機器人,而無需花費數小時的時間學習如何構建和編程機器人。
注意!本套件不含 Micro:bit 開發板,您如果沒有需要額外加購。
加入購物車Quick View -
3.7V 2000mAh 聚合物鋰電池 103450鋰電池 (XH2.54接頭)
0 滿分 5 分附贈PH2.0接頭(適用於Micro bit 開發板 或 Mbot小車)請自行裁接線頭更換
NT$333NT$300 未稅加入購物車Quick View