- 商品說明
商品說明
MG996R 360度 金屬齒輪伺服器 舵機
MG996R 11KG大扭力舵機/伺服馬達
產品名稱:最新大扭力舵機MG996R (MG995升級產品)6v/11Kg
廠家編號:MG996R
產品淨重: 55g
產品尺寸: 40.7*19.7*42.9mm
產品拉力: 9.4kg/cm(4.8V ), 11kg/cm(6V)
反應速度: 0.17sec/60degree(4.8v) 0.14sec/60degree(6v)
工作電壓: 4.8-7.2V
工作溫度: 0℃-55℃
齒輪形式: 金屬齒輪
工作死區: 5us (微秒)
MG996R is an upgraded version of MG995 servo.
The new PCB and IC control system which makes it far more accurate.
Its internal gearing and motor are also upgraded to improve dead bandwidth and centering.
It is a great choice for 1/10 buggy and airplane helicopter, RC-cars from 10 to 6-th scale truggy and monster and many RC model.
We are the original manufacturer of TowerPro MG995 servo.
There are many counterfeit servos of TowerPro from China dealers selling on eBay, Amazon and Alibaba websites.
If the suppliers removed “TowerPro” logo from the photos and the products description, they are selling counterfeits low quality servo.
Please identify the supplier before you purchased the goods. Only our authorized dealers who provide reliable quality servos and after services.
相關商品
-
兩驅 2WD 智慧小車 自走車 機器人 底盤開發套件組
0 滿分 5 分Arduino ,樹莓派 適用 兩驅 2WD 智慧小車 / 自走車/ 機器人 底盤開發套件組
小車都以散件形式發貨(便於運輸),附有3D安裝圖紙,拿到手後按照圖紙只要十分鐘就可以安裝完成,非常簡單,您可以利用本開發套件組結合 Arduino 或者樹莓派或其他單片機開發出您專屬的智慧小車。本套件全新升級不加價,底盤加大16CM*22CM,長寬比普通三輪小車分別加大2CM,巡線擺動更穩定,TT電機支架加厚2MM,比原來老款車型堅固、載重能力安裝方便,結構合理,結實耐用。
NT$457NT$286 未稅加入購物車Quick View -
USB 32路舵機控制器 舵機控制板 支援PS2 搖桿 相容Arduino 藍板
0 滿分 5 分本產品最大的優勢是:可以使用電腦軟件控制機器人,或者控制你的舵機。可以同時控制32個舵機、精度很高(1us)、採用美國原裝進口的32位CPU,內部集成USB通訊接口,穩定性和精度極高。可以同時控制多達32個伺服電機協調動作,具有位置控制以及速度控制,既可以用PC機上的軟件來控制,也可以通過MCU(51、AVR、ARM、FPGA、PIC等)中的UART通訊( TTL電平的串口)發命令來控制舵機,也可以將PC機上的軟件產生的指令代碼下載到伺服電機控制器,實現脫機運作。
NT$1,190NT$981 未稅加入購物車Quick View -
L9110S 雙通道直流電機驅動模組 , 兩路步進電機驅動板
0 滿分 5 分L9110S 雙通道直流電機驅動模組 , 兩路步進電機驅動板
L9110S 直流電機驅動板, 板載2個L9110S馬達控制晶片, 模組可以同時驅動2個直流電機或1個4線2相式步進電機, 模組輸入電壓:2.5-12V , 每通道具有800mA連續電流輸出能力
NT$52NT$40 未稅加入購物車Quick View -
Grove – Vibration Motor 振動馬達 直流馬達模組 seeed原廠
0 滿分 5 分這是一款無聲的迷你震動馬達模組。當輸入高電平時,電機會像手機在靜音模式一樣振動。支援 Arduino 與 Raspberry Pi
NT$114NT$100 未稅加入購物車Quick View -
小型扁圓形直流馬達 5V
0 滿分 5 分小型扁圓形直流馬達 5V
軸的直徑:2mm
NT$48NT$43 未稅加入購物車Quick View -
Adafruit DRV2605L Haptic Motor Controller 控制器 (用於蜂鳴器或震動馬達)
0 滿分 5 分DRV2605L Haptic Motor Controller
The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors – buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, ‘click’ effects, different buzzer levels, or even having the vibration follow a musical/audio input.
NT$362NT$340 未稅加入購物車Quick View -
3V-6V 方形微型 直流馬達
0 滿分 5 分3V-6V 方形微型直流馬達 直流玩具馬達,微型小電機
- 【長度】25mm
- 【直徑】21mm
- 【軸徑】2mm
- 【軸長】9mm
- 【電壓】3-6V
NT$29NT$24 未稅加入購物車Quick View -
Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
0 滿分 5 分Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
A3967 是美國allegro公司生產的pwm恆流控制微步距驅動二相步進電機專用驅動器。它的工作電壓可達30v,驅動電流達750ma,一個a3967slb即可驅動一台二相步進電機,可實現8細分驅動。芯片內部的pwm電流控制電路可通過加在pfd的電壓設置為慢、快、混合三種電流衰減模式,如果pfd端的電壓高於0.6vdd,則選擇慢衰減方式。若低於0.21vdd,則選擇快衰減模式。處於兩者之間為混合衰減模式。另外,a3967slb還能提供完善的保護措施,包括抑制瞬態電壓,過熱保護、防止電流直通、欠電壓自鎖等功能。a3967slb和微處理器之間不需要附加其他的接口電路,該芯片採easystepper 接口,將8條控制線減少了2條(步長和方向),只要簡單地輸入控制步進電機的脈衝,其內嵌的轉換器就可以實現對步進電機的控制。NT$171NT$143 未稅加入購物車Quick View -
GA12-N20 微型金屬減速馬達
0 滿分 5 分GA12-N20 微型金屬減速馬達 全金屬齒輪 體積小、扭力大、全金屬齒輪,耐用不易磨損!
可順逆/正反轉具有自鎖功能噪音小扭矩大. 電機精小,用處大,做用廣.是開發者的首選。N20 金屬馬達體積小,扭力大,電流小,減速比越大,電機運行越靜音。12 MM 直流減速馬達可用 PWM 控速。
NT$167NT$124 未稅加入購物車Quick View -
加入購物車Quick View
Grove – MOSFET 微型 繼電器 開關模組 seeed原廠
0 滿分 5 分加入購物車Quick View