- 商品說明
商品說明
Infrared CO2 Sensor 0-50000ppm(Wide Range) 二氧化碳傳感器模塊
DFRobot最新推出高精度大量程紅外二氧化碳傳感器,有效量程可達0~50000ppm。該款傳感器是一個通用型、小型傳感器,利用非色散紅外(NDIR技術)原理對空氣中存在的CO2進行探測,具有很好的選擇性,無氧氣依賴性,使用壽命長達5年。並且內置溫度補償,使用串口,就可讀取當前CO2氣體濃度,使用非常簡單,兼容各類單片機和傳感器。
該紅外傳感器是將成熟的紅外吸收氣體檢測技術製作出的高性能傳感器。具有抗水汽干擾,不中毒,壽命長等特點,可以長時間放在空氣中使用,避免了中毒後長時間的加熱。可廣泛應用於智能農業,暖通製冷與室內空氣質量監控,工業過程及安全防護監控,農業及畜牧業生產過程監控等。
特徵
- 氣室採用鍍金處理,防水防腐蝕
- 高靈敏度、低功耗
- 優異的穩定性
- 溫度補償,卓越的線性輸出
- 使用壽命長
- 抗水汽干擾、不中毒
- 兼容3.3V和5V主控器(注意:使用3.3V設備時,仍然可以5V供電)
規格
- 檢測氣體: 二氧化碳
- 工作電壓: 4.5~5.5V DC
- 平均電流: < 85 mA
- 輸出信號: UART/PWM/Analog輸出(後面兩個接口未引出)
- 測量範圍: 0~50000ppm
- 精度:±(50ppm+5%讀數)
- 預熱時間: 3min
- 響應時間: T 90 < 30s
- 工作溫度: 0~50℃
- 工作濕度: 0~95%RH (無凝結)
- 壽命: >5 年
- 電路板尺寸:21mm*27.11mm
- 重量:42g
接線圖
出貨清單
- UART紅外CO2傳感器探頭(0-50000ppm)x1
- 傳感器轉換板 x1
- 6針傳感器電線 x1
- PH2.0重力UART電線 x1
- XH2.54 4針排針 x1
Documents
=========================================================
Gravity: UART Infrared CO2 Sensor (0-50000ppm)
DFRobot released its latest wide range Arduino infrared CO2 sensor, which effective range is up to 0~50000ppm. This sensor is based on non-dispersive infrared (NDIR) technology and has good selectivity and oxygen-free dependency. It integrates temperature compensation and support UART communication mode. Most importantly, the product is easy to use; it is compatible with all types of microcontrollers with UART port, like Arduino, Raspberry Pi and other microcontrollers. Besides, it has a long service life, up to 5 years!
In addition, this UART Infrared CO2 Sensor is a high-performance sensor that combines technology of mature infrared absorption gas detection with precision optical circuit design as well as sophisticated circuit design. It has characteristics such as wide range detection, high sensitivity, high resolution, low power consumption, fast response, anti-water vapor interference, no poisoning, high stability and long life.
It can be widely used in HVAC refrigeration and indoor air quality monitoring, industrial process and safety monitoring, agricultural and animal husbandry production process monitoring, etc..
This is a 0~50000ppm wide range CO2 sensor with UART communication port. It supports Arduino, Raspberry Pi and other microcontrollers. In addition, we also have a 0~5000 ppm high precision infrared sensor with Gravity Analog interface, more easy to use: Gravity Analog Infrared CO2 Sensor (0~5000ppm).
FEATURES
- High sensitivity High resolution
- Low power consumption
- Excellent stability
- Temperature compensation
- Excellent linear output
- High cycle life
- Anti-water vapor interference
- No poisoning
- Need 5V power supply, even you are using a 3.3V microcontroller, like Genuino 101/ Raspberry Pi .etc.
SPECIFICATION
- Gas Detection: Carbon Dioxide (CO2)
- Operating Voltage: 4.5 ~ 5.5V DC
- Average Current: <85mA
- Output Signal: UART/PWM/Analog output (the last two has not been developed)
- Measuring Range: 0 ~ 50000ppm
- Accuracy: ± (50ppm + 5% reading)
- Preheating Time: 3min
- Response Time: T90 < 30s
- Operating Temperature: 0 ~ 50 ℃
- Operating Humidity: 0 ~ 95% RH (no condensation)
- Service Life: >5 years
- Board Dimension : 21 * 27.11 mm/ 0.83 * 1.06 inches
- Weight: 42g
DOCUMENTS
SHIPPING LIST
- UART Infrared CO2 Sensor Probe (0-50000ppm) x1
- Sensor Converter Board x1
- 6-Pin Sensor Cable x1
- PH2.0 Gravity UART Cable x1
- XH2.54 4-Pin header x1
相關商品
-
高感度麥克風感測器模組
0 滿分 5 分NT$62NT$38 未稅加入購物車Quick View -
5路循跡感測器 五路紅外線尋跡感測器 帶碰撞、距離檢測功能
0 滿分 5 分NT$190NT$152 未稅加入購物車Quick View -
加入購物車Quick View
MAX471 電壓檢測 電流檢測模組 電壓感測器 電流感測器
0 滿分 5 分電流檢測採用美國美信公司生產的精密高端電流檢測放大器晶片MAX471
加入購物車Quick View -
Grove – Air quality sensor v1.3 空氣品質感測器模組 seeed原廠
0 滿分 5 分主要可以監測的氣體是一氧化碳,醇,丙酮,稀釋劑,甲醛等輕微毒性氣體。本模組兼容 5V和3.3V電源。
NT$457NT$300 未稅加入購物車Quick View -
Grove – Infrared Temperature Sensor 紅外線 溫度感測器模組 seeed原廠
0 滿分 5 分紅外溫度傳感器通過接收物體發出的紅外線來測量其溫度。
NT$457NT$380 未稅加入購物車Quick View -
TF Mini LiDAR 12m (ToF) 雷射 激光 距離測量傳感器/感測器 DFRobot原廠
0 滿分 5 分TF Mini LiDAR是一款基於飛行時間(ToF)技術的單向激光測距儀。
它由特殊的光學和電子設備組成,集成了適用於室內和室外應用環境的自適應算法。
它具有纖巧的機身和遠距離測量的高性能。
NT$1,600NT$1,420 未稅加入購物車Quick View -
電流轉電壓模組 0/4-20mA 轉 0-3.3V、5V、10V 電壓變送器 信號轉換調理
0 滿分 5 分在電路信號傳輸的過程中電壓信號會隨著傳輸距離的增加而變弱,採用電流傳輸可以避免信號的變弱。
本模組用於電流信號傳輸末端,將信號轉換成電壓信號供單片機檢測。
電流輸入支援4-20Ma、0-20mA,電壓輸出支援0-3.3V、0-5V、0-10V
NT$190NT$114 未稅加入購物車Quick View -
Gravity: Analog Turbidity Sensor 水濁度感測器 水質檢測 養殖環境監測 For Arduino DFRobot原廠
0 滿分 5 分濁度感測器利用光學原理,通過測量溶液中的透光率和散射率來綜合判斷溶液濁度情況,從而達到檢測水質的目的。
NT$648NT$500 未稅加入購物車Quick View -
Grove – 3-Axis Analog Accelerometer 3軸加速度計 seeed原廠
0 滿分 5 分ADXL335 是一款小巧,薄型,低功耗,完整的3軸加速度計,具有信號調理電壓輸出。 該產品可測量加速度,最小滿量程範圍為±3 g。
NT$476NT$380 未稅加入購物車Quick View -
Grove – I2C Touch Sensor 電容式觸摸感測器 I2C 觸摸開關感應器 seeed原廠
0 滿分 5 分I2C 觸摸感測器使用飛思卡爾MPR121晶片,它可以感應觸碰和人的手指的接近。這個感應器包括兩部分——一個觸碰感應控制器和4個感應片。把感應片插到控制器上,就可以開始使用了。
NT$819NT$400 未稅加入購物車Quick View