- 商品說明
商品說明
Hitec 原裝進口 高性能舵機 HS-422 Deluxe HS422 標準舵機
這是經典的Hitec HS-422伺服。這種堅固的消費級伺服電壓能夠承受6伏特,輸出57盎司。在0.16秒/ 60°的最大扭矩,這是一個簡單的伺服適用於任何初學者項目!
這種高質量的伺服系統非常適合您的機電一體化需求,如果您想進入機器人技術,這就是從哪裡開始的。HS-422伺服系統標配3針電源和控制電纜以及下面列出的所有硬件。
特徵
- 電壓:4.8-6.0伏
- 扭矩:45.82 / 56.93盎司。(4.8 / 6.0V)
- 速度:0.21 / 0.16秒/ 60°(4.8 / 6.0V)
- 方向:順時針/脈衝行程1500-1900usec
- 旋轉:180°
- 雙油管襯套
- 尼龍齒輪
- 三極鐵氧體電機
- C1標準花鍵* 40.6 x 19.8 x 36.6mm
- 線長:300mm
- 重量:45.5克
出貨清單
- 1x HS-422伺服
- 1x圓角
- 1x雙臂喇叭
- 1x單臂(帶滑動支架)喇叭
- 1x四角喇叭
- 4x橡膠墊圈
- 4x 2x15mm十字螺絲
- 4x黃銅孔眼
Documents
=========================================================
Servo – Hitec HS-422 (Standard Size)
This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner project!This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-422 servo comes standard with a 3-pin power and control cable and all hardware listed below.
Features
- Voltage: 4.8-6.0 Volts
- Torque: 45.82/56.93 oz-in. (4.8/6.0V)
- Speed: 0.21/0.16 sec/60° (4.8/6.0V)
- Direction: Clockwise/ Pulse Traveling 1500-1900usec
- Rotation: 180°
- Dual Oilite Bushing
- Nylon Gears
- 3-Pole Ferrite Motor
- C1 Standard Spline
Includes
- 1x HS-422 Servo
- 1x Circle Horn
- 1x Double Arm Horn
- 1x Single Arm (w/ Slide Bracket) Horn
- 1x Four Point Horn
- 4x Rubber Grommets
- 4x 2x15mm Phillips Screw
- 4x Brass Eyelets
Dimensions
- 40.6 x 19.8 x 36.6mm
- Wire Length: 300mm
- Weight: 45.5g
Documents
相關商品
-
MG996R 55G 360度 金屬齒輪伺服器 舵機
0 滿分 5 分MG996R 360度 金屬齒輪伺服器 舵機 ,數位式 11 KG大扭力舵機/伺服馬達
最新大扭力舵機MG996R (MG995升級產品)6v/11Kg , 原MG995的升級產品,是目前市場上較具性價比大扭力舵機之一
NT$305NT$257 未稅加入購物車Quick View -
2路電機板+16路舵機擴展板 機器人機械臂小車底盤專用擴充板 適用於Arduino
0 滿分 5 分2路電機板+16路舵機擴展板Arudino UNO 機器人機械臂小車底盤
2 Motor && 16 Servo Drive Shield是兼容Arduino UNO和ESPduino的一款電機和舵機驅動模塊。模塊採用疊插式線路板設計,可以直接接入Arduino UNO 或者ESPduino線路板。該產品可以同時控制2 路直流電機(4.5 ~36V )和16 路舵機(5 ~18V ),適合於裝有機械臂的移動機器人驅動控制。
NT$619NT$500 未稅加入購物車Quick View -
機器手臂 專用 交換式電源 25W 5V5A 可同時供應多個舵機
0 滿分 5 分機器手臂專用交換式電源 25W 5V5A 可同時供應多個舵機
提供六軸機械手臂,六顆伺服馬達電源。
使用 105℃ 長壽電解電容, 可操作於環溫 70℃
抗 300VAC 輸入電壓突波, 高達 5 秒之能力
35 – 150W 均通過 EN61000-6-2 重工業 EMS 標準
Protections : Short circuit / OLP / OVP
100% full load burn-in testNT$333NT$280 未稅加入購物車Quick View -
N20減速馬達專用 D型軸塑膠輪胎 42MM
0 滿分 5 分N20減速馬達專用 D型軸塑膠輪胎 42MM 帶12線編碼
輪子尺寸:直徑42MM 寬19MM
材質:橡膠
碼盤精度:單圈12個脈衝
其他參數:顏色黑色,重量19g
出貨為一個輪子
NT$62NT$48 未稅加入購物車Quick View -
Adafruit DRV2605L Haptic Motor Controller 控制器 (用於蜂鳴器或震動馬達)
0 滿分 5 分DRV2605L Haptic Motor Controller
The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors – buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, ‘click’ effects, different buzzer levels, or even having the vibration follow a musical/audio input.
NT$362NT$340 未稅加入購物車Quick View -
SG90 舵機 9克伺服機 伺服馬達 1.5Kg扭力 品質穩定
0 滿分 5 分180度
NT$95NT$57 未稅加入購物車Quick View -
加入購物車Quick View
Grove – MOSFET 微型 繼電器 開關模組 seeed原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
Grove – Voltage Divider 電阻分壓器 seeed原廠
0 滿分 5 分加入購物車Quick View -
MG995 金屬銅齒輪 55G 舵機 360度
0 滿分 5 分MG995/雙足機器人/機械手/遙控車/55G金屬銅齒輪舵機, 產品型號 MG995 產品尺寸 40.7*19.7*42.9mm 產品重量 55g, 工作扭矩 13KG/cm 反應轉速 53-62R/M 使用溫度 -30~+60°
適用範圍 1:10和1:8平跑車、越野車、卡車、大腳車、攀爬車、雙足機器人、機械手、遙控船,適合50級-90級甲醇固定翼飛機以及26cc-50cc汽油固定翼飛機等模型。NT$190NT$160 未稅加入購物車Quick View -
L293D 馬達驅動擴展板/Motor Control Shield for Arduino
0 滿分 5 分L293D 馬達驅動擴展板 /Motor Control Shield for Arduino
Arduino 是一款很好的電子製作入門,有了馬達擴展板可以很好的成為機器人開發平臺。這裏介紹一款能驅動各種簡單到稍複雜項目的全功能的馬達擴展板。這是一款常用的直流馬達驅動模組,採用L293D晶片小電流直流馬達驅動晶片。管腳被做成了Arduino相容的,也方便了愛好者快速的基於Arduino的開發。
NT$229NT$114 未稅加入購物車Quick View