Grove – Mini Fan v1.1 迷你風扇 seeed原廠
NT$333 NT$280 未稅
尚有庫存
- 商品說明
商品說明
Grove – Mini Fan v1.1 迷你風扇
Grove – Mini Fan 模組是基於 AVR Atmega168 微控制器的直流電機驅動器。該模組還提供了一個介面,通過它可以更改微控制器代碼。
例如,可以更改代碼,以便該模組可用於驅動 伺服電機。 默認情況下,該模組設置為運行包裝中的直流電機。
包裝中的軟風扇也可以連接到電機上,為孩子們做一個有趣的項目。柔軟的風扇是完全安全的,即使高速轉動也不會有任何傷害。
產品特性
- 用戶友好型輸出模塊根據從輸入傳感器或開關模塊接收到的信號觸發直流電機運行
- 與包裝中附帶的直流電機配合使用
- JST 2.0接口用於連接電機
- 直流電機帶有豐富多彩的柔軟風扇附件(如圖所示)
- 板載微控制器可以重新編程以更改模塊操作
- 微控制器運行的Arduino兼容代碼
- 更換代碼以驅動伺服電機,而不是直流電機
- 使用標準4針Grove線纜連接到其他Grove模塊
- 注意:對於最新版本(v1.1),電機的輸出電壓更新為3.3伏。
接口功能
① UartSBee 介面 : 使用此介面更改微控制器代碼。使用 [UartSBee](/UartSBee_V4) 模組的 Uart 介面連接到微控制器。
② JST 2.0 介面 : 用於連接 3.3V 直流電機(僅 3.3V)
③ Grove 介面
④ ICSP 介面
⑤ Atmega168 微控制器
⑥ Servo 介面
出貨清單
- Mini_Fan x1
- 直流電機 x1
- 直流電機驅動板 x1
- Grove連接線 x1
Documents
=========================================================
Grove – Mini Fan v1.1
Hey hey, calm down, have some fresh air here. The Grove – Mini Fan v1.1 can be set up in seconds and bring you some nice and cool air in the hot days. It has four parts, a mini fan, a DC Motor, a DC motor driver and a Grove cable. The cartoon-style fan design makes it good choice for decorating your little LEGO house as well.
The motor driver boards have a built-in programmable microcontroller that uses Arduino IDE. In default, it is programmed to drive DC motors with analog inputs, and the rotate speed depends on the value of input signal. You can simply connect up all the parts and plug it into a controller board that has Grove interfaces, upload some code and you are ready to make it spin.
Features
- Easy to use
- Cartoon Style mini fan
- Soft fan-blade to avoid injuries
- Built-in programmable microcontroller that uses Arduino IDE
- You can change the code to drive servo motors instead of DC motor
Specificaiton
- Input Voltage: 5V
- Connector: 4 Pin Buckled Grove interface for input signal; JST 2.0 interface for the DC motor
- Dimension: 20mm x 20mm
Documents
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface – Getting Started and Introduction to Grove before your using of the product.
- For technical discussion, please come to our Forum.
- For projects that you would like to share with the community, please visit Recipe.
相關商品
-
Grove – Gas Sensor(MQ2) 煙霧氣體感測器 seeed原廠
0 滿分 5 分檢測的氣體包括異丁烷,液化石油氣,甲烷,乙醇,氫氣,煙霧等。感測器的回應速度快,便於實際的測量。通過板上的電位器調整輸出精度
NT$257NT$220 未稅加入購物車Quick View -
Grove – EMG Detector 肌電圖 檢測儀 肌肉信號傳感器/感測器 肌電檢測器 seeed原廠
0 滿分 5 分傳感器採集小肌肉信號然後進行第2次放大和濾波,輸出信號可以被Arduino識別。
NT$1,486NT$1,320 未稅加入購物車Quick View -
Grove – Sound Sensor 聲音感測器 seeed原廠
0 滿分 5 分聲音感測模組是一個麥克風元件,它可以用於檢測偵測環境中的聲音強度。而偵測到的資料輸出的值可以由電位進行調整。
NT$238NT$180 未稅加入購物車Quick View -
Grove – Fingerprint Sensor 光學指紋感測器模組 指紋建檔/識別 seeed原廠
0 滿分 5 分指紋感測器模組通過光學檢測,識別輸入的指紋是否和已經建檔錄存的指紋數據統一。本指紋識別感測器採用高性能的DSP晶片進行圖片渲染、計算、識別、搜索。你也可以直接錄存新的指紋,最多可以錄入162個。當傳感器工作時,紅色LED開始閃爍。適合用來做指紋鎖等項目。
NT$1,667NT$1,300 未稅加入購物車Quick View -
Grove – Infrared Temperature Sensor 紅外線 溫度感測器模組 seeed原廠
0 滿分 5 分紅外溫度傳感器通過接收物體發出的紅外線來測量其溫度。
NT$457NT$380 未稅加入購物車Quick View -
Grove – Dry-Reed Relay 磁簧管開關模組 干簧管繼電器模組 乾式磁簧繼電器 seeed原廠
0 滿分 5 分乾式磁簧繼電器的應用, 有如繼電器。支援 Arduino 與 Raspberry Pi 。
加入購物車Quick View -
Grove – Piezo Vibration Sensor MEAS 壓電式 振動 感測器 震動傳感器 seeed原廠
0 滿分 5 分主要用於汽車防盜報警器、臥式滾筒洗衣機振動不平衡及其他要求安靜、小噪音的家用電器如空調及電廣靶鏢記分等 振動 信號的檢測,也可以用於記數器的觸發器做為柔性開關、脈膊檢測、聲納測量等等。
NT$267NT$220 未稅加入購物車Quick View -
Grove – GSR Sensor 測謊器 皮膚電阻感測器 流汗感測器 seeed原廠
0 滿分 5 分NT$433NT$320 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ5) 氣體感測器 Seeed原廠
0 滿分 5 分可檢測液化石油氣,天然氣,城鎮煤氣等。基於其快速響應時間,測量可以盡快進行。且其靈敏度也可以通過電位器來進行調節。
NT$276NT$220 未稅加入購物車Quick View -
Grove – Ultrasonic Ranger 超音波測距模組 距離探測傳感器 seeed原廠
0 滿分 5 分Grove – Ultrasonic Sensor是一個非接觸式的距離探測模塊。他的工作頻率在42KHz,適合用於中距離或近距離的探測。已經附上 Arduino 函數庫。
NT$190NT$140 未稅加入購物車Quick View