Grove – Mini Fan v1.1 迷你風扇 seeed原廠
NT$333 NT$280 未稅
尚有庫存
- 商品說明
商品說明
Grove – Mini Fan v1.1 迷你風扇
Grove – Mini Fan 模組是基於 AVR Atmega168 微控制器的直流電機驅動器。該模組還提供了一個介面,通過它可以更改微控制器代碼。
例如,可以更改代碼,以便該模組可用於驅動 伺服電機。 默認情況下,該模組設置為運行包裝中的直流電機。
包裝中的軟風扇也可以連接到電機上,為孩子們做一個有趣的項目。柔軟的風扇是完全安全的,即使高速轉動也不會有任何傷害。
產品特性
- 用戶友好型輸出模塊根據從輸入傳感器或開關模塊接收到的信號觸發直流電機運行
- 與包裝中附帶的直流電機配合使用
- JST 2.0接口用於連接電機
- 直流電機帶有豐富多彩的柔軟風扇附件(如圖所示)
- 板載微控制器可以重新編程以更改模塊操作
- 微控制器運行的Arduino兼容代碼
- 更換代碼以驅動伺服電機,而不是直流電機
- 使用標準4針Grove線纜連接到其他Grove模塊
- 注意:對於最新版本(v1.1),電機的輸出電壓更新為3.3伏。
接口功能
① UartSBee 介面 : 使用此介面更改微控制器代碼。使用 [UartSBee](/UartSBee_V4) 模組的 Uart 介面連接到微控制器。
② JST 2.0 介面 : 用於連接 3.3V 直流電機(僅 3.3V)
③ Grove 介面
④ ICSP 介面
⑤ Atmega168 微控制器
⑥ Servo 介面
出貨清單
- Mini_Fan x1
- 直流電機 x1
- 直流電機驅動板 x1
- Grove連接線 x1
Documents
=========================================================
Grove – Mini Fan v1.1
Hey hey, calm down, have some fresh air here. The Grove – Mini Fan v1.1 can be set up in seconds and bring you some nice and cool air in the hot days. It has four parts, a mini fan, a DC Motor, a DC motor driver and a Grove cable. The cartoon-style fan design makes it good choice for decorating your little LEGO house as well.
The motor driver boards have a built-in programmable microcontroller that uses Arduino IDE. In default, it is programmed to drive DC motors with analog inputs, and the rotate speed depends on the value of input signal. You can simply connect up all the parts and plug it into a controller board that has Grove interfaces, upload some code and you are ready to make it spin.
Features
- Easy to use
- Cartoon Style mini fan
- Soft fan-blade to avoid injuries
- Built-in programmable microcontroller that uses Arduino IDE
- You can change the code to drive servo motors instead of DC motor
Specificaiton
- Input Voltage: 5V
- Connector: 4 Pin Buckled Grove interface for input signal; JST 2.0 interface for the DC motor
- Dimension: 20mm x 20mm
Documents
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface – Getting Started and Introduction to Grove before your using of the product.
- For technical discussion, please come to our Forum.
- For projects that you would like to share with the community, please visit Recipe.
相關商品
-
Grove – Gas Sensor(MQ9) 瓦斯氣體 一氧化碳偵測感測器 seeed原廠
0 滿分 5 分NT$300NT$280 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ3) 酒精濃度 氣體 感測器模組 seeed原廠
0 滿分 5 分它可以檢測酒精,汽油,甲烷,己烷,液化石油氣,CO 其感測速度與回應的非常靈敏快速。也靈敏度可以由電位進行調整。
NT$362NT$240 未稅加入購物車Quick View -
Grove – Dust Sensor(PPD42NS)細懸浮微粒 pm2.5 粉塵傳感器 seeed原廠
0 滿分 5 分NT$476NT$360 未稅加入購物車Quick View -
Grove – Infrared Temperature Sensor 紅外線 溫度感測器模組 seeed原廠
0 滿分 5 分紅外溫度傳感器通過接收物體發出的紅外線來測量其溫度。
NT$457NT$380 未稅加入購物車Quick View -
Grove – Screw Terminal 4P 螺絲端子座 額定功率可達 125V@6A seeed原廠
0 滿分 5 分NT$100NT$80 未稅加入購物車Quick View -
Grove – 3-Axis Digital Gyro 三軸電子陀螺儀 (I2C) ITG 3200 seeed原廠
0 滿分 5 分電子輸出的三軸MEMS運動處理陀螺儀。適用於遊戲、3D鼠標或其他運動檢測相關的應用。
NT$952NT$620 未稅加入購物車Quick View -
Grove – Air quality sensor v1.3 空氣品質感測器模組 seeed原廠
0 滿分 5 分主要可以監測的氣體是一氧化碳,醇,丙酮,稀釋劑,甲醛等輕微毒性氣體。本模組兼容 5V和3.3V電源。
NT$457NT$300 未稅加入購物車Quick View -
Grove – GPS Module 衛星模組 適用於 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分Grove – GPS模組是一款低成本及可程式設計的GPS模組,可用於手持設備GPS資料的採集。模組採用串口通信,可通過串口進行資料的讀取。它設有一個50通道的u-blox 5定位引擎,首次定位時間(TTFF)小於1s。跟蹤和採集的靈敏度均達到-160dBm,適用於個人導航及位置服務的專案。
NT$857NT$700 未稅加入購物車Quick View -
Grove – Piezo Vibration Sensor MEAS 壓電式 振動 感測器 震動傳感器 seeed原廠
0 滿分 5 分主要用於汽車防盜報警器、臥式滾筒洗衣機振動不平衡及其他要求安靜、小噪音的家用電器如空調及電廣靶鏢記分等 振動 信號的檢測,也可以用於記數器的觸發器做為柔性開關、脈膊檢測、聲納測量等等。
NT$267NT$220 未稅加入購物車Quick View -
Grove – Alcohol Sensor 酒精感測器 seeed原廠
0 滿分 5 分酒精感測器(傳感器)為酒精專用檢測半導體傳感器。它具有良好的靈敏度和回應速度快的特性,本模組適用用於開發便攜式酒精檢測系統。
NT$286NT$220 未稅加入購物車Quick View