- 商品說明
商品說明
Grove – Infrared Reflective Sensor 紅外線循跡模組 循跡避障模塊 v1.2
紅外線的反射是通過檢測物體表面發射光線的顏色和距離。因此,當一個淺色物體靠近時,信號強度增加,指示燈變成紅色,當深色物體靠近時,信號強度減弱,指示燈熄滅。紅外反射傳感器主要應用在尋線跟跟踪、旋轉測速,或是其他被檢測物體顏色對比強烈的場景。
特徵
- Grove兼容且易於使用
- 高度敏感和可靠
- 佔地面積小
- 適用於不同場合的靈敏度
- 內置指示燈LED
- 通過電位計可調節閾值
規格
工作電壓(V) | 3.3-5V |
工作電流(mA) | 14.69-15.35毫安 |
有效的可檢測距離 | 4-15毫米 |
單色線的最小可檢測寬度 | 10mm |
光電晶體管:峰值靈敏度波長 | 800納米 |
IR LED:峰值發光波長 | 940nm |
數字輸出 | 0或VCC |
反射光電傳感器 | RPR-220 |
出貨清單
- Grove – Infrared Reflective Sensor x1
- Grove連接線 x1
Documents
=========================================================
Grove – Infrared Reflective Sensor v1.2
Grove – Infrared Reflective Sensor v1.2 can be used for detection of proximity and color of objects. The reflective photosensor – RPR–220 used in this module consists of an infrared light emitting diode and a high –sensitivity phototransistor. Light-colored objects directly in front of the sensor will reflect more infrared light as well as generate more current in the phototransistor than an object with dark-colored surfaces, this can be tell from a built-in indicator LED which will turn red with sufficient flow of current. Also, the intensity of the reflective light increases as the object getting closer. You can adjust the potential-meter on the back of the board if you want to detect a specific object (eg. Black line) at a certain distance.
This sensor is a widely used in applications such as line-following robots, rotary speed detection, auto-data logging on utility meters or other situations where color or distance contrast is sharp.
Features
- Panel-mounting Grove interface
- Digital output: 0 or VCC
- Built-in indicator LED
- Threshold adjustable via potentiometer
- Power supply: 3.5 – 5.5V DC
- Reflective Photosensor: RPR-220
- Effective working distance: 4-15mm
- Minimum detectable width for monochrome lines: 10mm
- Connector: 4 pin Buckled Grove interface
- Dimension: 20mm*20mm
相關商品
-
Grove – Recorder v3.0 錄音感測器 錄音機 語音錄放模組 seeed原廠
0 滿分 5 分NT$733NT$560 未稅加入購物車Quick View -
Grove – Sound Sensor 聲音感測器 seeed原廠
0 滿分 5 分聲音感測模組是一個麥克風元件,它可以用於檢測偵測環境中的聲音強度。而偵測到的資料輸出的值可以由電位進行調整。
NT$238NT$180 未稅加入購物車Quick View -
Grove – Infrared Temperature Sensor 紅外線 溫度感測器模組 seeed原廠
0 滿分 5 分紅外溫度傳感器通過接收物體發出的紅外線來測量其溫度。
NT$457NT$380 未稅加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
Grove – Flame Sensor 火焰感測器 seeed原廠
0 滿分 5 分NT$371NT$200 未稅加入購物車Quick View -
Grove – Dust Sensor(PPD42NS)細懸浮微粒 pm2.5 粉塵傳感器 seeed原廠
0 滿分 5 分NT$476NT$360 未稅加入購物車Quick View -
Grove – UV Sensor UV 紫外線感測器 seeed原廠
0 滿分 5 分NT$457NT$300 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ2) 煙霧氣體感測器 seeed原廠
0 滿分 5 分檢測的氣體包括異丁烷,液化石油氣,甲烷,乙醇,氫氣,煙霧等。感測器的回應速度快,便於實際的測量。通過板上的電位器調整輸出精度
NT$257NT$220 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Multichannel Gas Sensor v2 多通道有害氣體感測器 seeed原廠
0 滿分 5 分加入購物車Quick View -
Grove – Chainable RGB LED 全彩 RGB 可串接式 LED 模組 seeed原廠
0 滿分 5 分Grove – Chainable RGB LED是基於P9813全彩LED驅動晶片的RGB LED模塊。它支持串接,最多可同時串接1024個同類模組。
NT$162NT$120 未稅加入購物車Quick View