Grove – Chainable RGB Led V2.0 seeed原廠
NT$238 NT$180 未稅
Grove-Chainable RGB LED V2.0基於P9813S14芯片。該芯片是一款全彩色光源驅動芯片,可提供三個恆流驅動器和256個灰度調製輸出。通過將一個LED的輸出樹槽連接器連接到另一個LED的輸入樹槽連接器,您最多可以鏈接1024個RGB LED!
尚有庫存
- 商品說明
商品說明
Grove – Chainable RGB Led V2.0
Grove – Chainable RGB LED 是基於 P9813 晶片的,它是全彩 LED 燈的驅動器。它提供 3 個恒流的驅動器以及 256 個灰度調製的輸出信號。它使用兩線傳輸(資料和時鐘)能夠與 MCU 進行通信。 可以使用這種兩線傳輸的功能實現 Grove – Chainable RGB LED 模組的多個連接。
內置的時鐘傳輸能夠增大傳輸距離。 該 Grove 模組能夠適用於任何使用彩色 LED 燈專案。
規格
外形尺寸 | 40mm x20mm x15mm |
重量 | G.W 11g |
電池 | Exclude |
輸入電壓 | 5V |
工作溫度 | -40 – 85℃ |
最大工作電流 | 60mA |
最大鍊條LED數量: | 1024 |
出貨清單
- Grove – Chainable RGB Led V2.0 x1
- Grove 連接線 x1
Documents
=========================================================
Grove – Chainable RGB Led V2.0
RGB LED always bring us vivid and magic light effect, especially when there are a large number of LEDs shining together. However it is not easy to connect all the LEDs together if you want to build such LED projects. Why not have a try with Seeed’s Grove- Chainable RGB LED V2.0.
Grove-Chainable RGB LED V2.0 is based on P9813S14 chip. This chip is a full-color light source driver chip that can provide three constant current driver and 256 greyscale modulation output. The key word of this product is “Chainable”, so how many LEDs can it be chained? By connecting the output grove connector of one LED to the input grove connector of another one, you are able to chain 1024 RGB LEDs at most!
If you have experience using Grove-Chainable RGB LED V1.0, you will find that V2.0 is a bit longer than V1.0. In V2.0, because we adjust the grove connectors to be parallel with the board instead of vertical, so that the cable don’t need to be crooked.
Technical details
Dimensions | 40mm x20mm x15mm |
Weight | G.W 11g |
Battery | Exclude |
Input voltage | 5V |
Working temperature | -40 – 85℃ |
Max working current | 60mA |
Max Chained LED Quantity: | 1024 |
相關商品
-
Grove – Fingerprint Sensor 光學指紋感測器模組 指紋建檔/識別 seeed原廠
0 滿分 5 分指紋感測器模組通過光學檢測,識別輸入的指紋是否和已經建檔錄存的指紋數據統一。本指紋識別感測器採用高性能的DSP晶片進行圖片渲染、計算、識別、搜索。你也可以直接錄存新的指紋,最多可以錄入162個。當傳感器工作時,紅色LED開始閃爍。適合用來做指紋鎖等項目。
NT$1,667NT$1,300 未稅加入購物車Quick View -
Grove – Infrared Temperature Sensor 紅外線 溫度感測器模組 seeed原廠
0 滿分 5 分紅外溫度傳感器通過接收物體發出的紅外線來測量其溫度。
NT$457NT$380 未稅加入購物車Quick View -
Grove – Screw Terminal 4P 螺絲端子座 額定功率可達 125V@6A seeed原廠
0 滿分 5 分NT$100NT$80 未稅加入購物車Quick View -
Grove – Flame Sensor 火焰感測器 seeed原廠
0 滿分 5 分NT$371NT$200 未稅加入購物車Quick View -
Grove – Serial Camera Kit 串列通訊攝影機鏡頭套件 seeed原廠
0 滿分 5 分本套件中提供了兩種規格的鏡頭。標準配置用於普通照片拍攝,廣角拍攝特別適用於監控項目。
加入購物車Quick View -
Grove – Piezo Vibration Sensor MEAS 壓電式 振動 感測器 震動傳感器 seeed原廠
0 滿分 5 分主要用於汽車防盜報警器、臥式滾筒洗衣機振動不平衡及其他要求安靜、小噪音的家用電器如空調及電廣靶鏢記分等 振動 信號的檢測,也可以用於記數器的觸發器做為柔性開關、脈膊檢測、聲納測量等等。
NT$267NT$220 未稅加入購物車Quick View -
Grove – Air quality sensor v1.3 空氣品質感測器模組 seeed原廠
0 滿分 5 分主要可以監測的氣體是一氧化碳,醇,丙酮,稀釋劑,甲醛等輕微毒性氣體。本模組兼容 5V和3.3V電源。
NT$457NT$300 未稅加入購物車Quick View -
Grove – Dry-Reed Relay 磁簧管開關模組 干簧管繼電器模組 乾式磁簧繼電器 seeed原廠
0 滿分 5 分乾式磁簧繼電器的應用, 有如繼電器。支援 Arduino 與 Raspberry Pi 。
加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
Grove – 433Mhz RF link kit RF 無線接收發射傳輸模組 seeed原廠
0 滿分 5 分該模組由發射器和接收器組成,廣泛用於遙控。
NT$276NT$160 未稅加入購物車Quick View