Grove – Chainable RGB Led V2.0 seeed原廠
NT$238 NT$180 未稅
Grove-Chainable RGB LED V2.0基於P9813S14芯片。該芯片是一款全彩色光源驅動芯片,可提供三個恆流驅動器和256個灰度調製輸出。通過將一個LED的輸出樹槽連接器連接到另一個LED的輸入樹槽連接器,您最多可以鏈接1024個RGB LED!
尚有庫存
- 商品說明
商品說明
Grove – Chainable RGB Led V2.0
Grove – Chainable RGB LED 是基於 P9813 晶片的,它是全彩 LED 燈的驅動器。它提供 3 個恒流的驅動器以及 256 個灰度調製的輸出信號。它使用兩線傳輸(資料和時鐘)能夠與 MCU 進行通信。 可以使用這種兩線傳輸的功能實現 Grove – Chainable RGB LED 模組的多個連接。
內置的時鐘傳輸能夠增大傳輸距離。 該 Grove 模組能夠適用於任何使用彩色 LED 燈專案。
規格
外形尺寸 | 40mm x20mm x15mm |
重量 | G.W 11g |
電池 | Exclude |
輸入電壓 | 5V |
工作溫度 | -40 – 85℃ |
最大工作電流 | 60mA |
最大鍊條LED數量: | 1024 |
出貨清單
- Grove – Chainable RGB Led V2.0 x1
- Grove 連接線 x1
Documents
=========================================================
Grove – Chainable RGB Led V2.0
RGB LED always bring us vivid and magic light effect, especially when there are a large number of LEDs shining together. However it is not easy to connect all the LEDs together if you want to build such LED projects. Why not have a try with Seeed’s Grove- Chainable RGB LED V2.0.
Grove-Chainable RGB LED V2.0 is based on P9813S14 chip. This chip is a full-color light source driver chip that can provide three constant current driver and 256 greyscale modulation output. The key word of this product is “Chainable”, so how many LEDs can it be chained? By connecting the output grove connector of one LED to the input grove connector of another one, you are able to chain 1024 RGB LEDs at most!
If you have experience using Grove-Chainable RGB LED V1.0, you will find that V2.0 is a bit longer than V1.0. In V2.0, because we adjust the grove connectors to be parallel with the board instead of vertical, so that the cable don’t need to be crooked.
Technical details
Dimensions | 40mm x20mm x15mm |
Weight | G.W 11g |
Battery | Exclude |
Input voltage | 5V |
Working temperature | -40 – 85℃ |
Max working current | 60mA |
Max Chained LED Quantity: | 1024 |
相關商品
-
Grove – PIR Motion Sensor 紅外線人體移動探測感測器 seeed原廠
0 滿分 5 分這是一個極易使用的紅外線 PIR人體運動探測感測器。通過這個感測器,你可以使你的作品對運動,例如人類的運動作出互動。只要將其接到Grove – Base Shield上,並且下載程序,當有人走入它的探測範圍時,PIR運動探測傳感器就會在它的SIG腳上輸出一個HIGH信號。
NT$333NT$260 未稅加入購物車Quick View -
Grove – Ultrasonic Ranger 超音波測距模組 距離探測傳感器 seeed原廠
0 滿分 5 分Grove – Ultrasonic Sensor是一個非接觸式的距離探測模塊。他的工作頻率在42KHz,適合用於中距離或近距離的探測。已經附上 Arduino 函數庫。
NT$190NT$140 未稅加入購物車Quick View -
Grove – Fingerprint Sensor 光學指紋感測器模組 指紋建檔/識別 seeed原廠
0 滿分 5 分指紋感測器模組通過光學檢測,識別輸入的指紋是否和已經建檔錄存的指紋數據統一。本指紋識別感測器採用高性能的DSP晶片進行圖片渲染、計算、識別、搜索。你也可以直接錄存新的指紋,最多可以錄入162個。當傳感器工作時,紅色LED開始閃爍。適合用來做指紋鎖等項目。
NT$1,667NT$1,300 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Multichannel Gas Sensor v2 多通道有害氣體感測器 seeed原廠
0 滿分 5 分加入購物車Quick View -
Grove-LoRa-E5 (STM32WLE5JC)無線傳輸模組 868/915 MHz,支援LoRaWAN seeed原廠
0 滿分 5 分內置LoRa-E5 STM32WLE5JC的Grove LoRa-E5由ARM Cortex M4超低功耗MCU內核和LoRa SX126x供電,是一種易於使用的無線模塊,支持EU868和US915頻率上的LoRaWAN協議,並且(G )FSK,BPSK,(G)MSK,LoRa調製。
NT$714NT$560 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ2) 煙霧氣體感測器 seeed原廠
0 滿分 5 分檢測的氣體包括異丁烷,液化石油氣,甲烷,乙醇,氫氣,煙霧等。感測器的回應速度快,便於實際的測量。通過板上的電位器調整輸出精度
NT$257NT$220 未稅加入購物車Quick View -
Grove – Dry-Reed Relay 磁簧管開關模組 干簧管繼電器模組 乾式磁簧繼電器 seeed原廠
0 滿分 5 分乾式磁簧繼電器的應用, 有如繼電器。支援 Arduino 與 Raspberry Pi 。
加入購物車Quick View -
Grove – Dust Sensor(PPD42NS)細懸浮微粒 pm2.5 粉塵傳感器 seeed原廠
0 滿分 5 分NT$476NT$360 未稅加入購物車Quick View -
Grove – EMG Detector 肌電圖 檢測儀 肌肉信號傳感器/感測器 肌電檢測器 seeed原廠
0 滿分 5 分傳感器採集小肌肉信號然後進行第2次放大和濾波,輸出信號可以被Arduino識別。
NT$1,486NT$1,320 未稅加入購物車Quick View -
Grove – Chainable RGB LED 全彩 RGB 可串接式 LED 模組 seeed原廠
0 滿分 5 分Grove – Chainable RGB LED是基於P9813全彩LED驅動晶片的RGB LED模塊。它支持串接,最多可同時串接1024個同類模組。
NT$162NT$120 未稅加入購物車Quick View