Gravity: Analog Gas Sensor MQ2 煙霧/氣體感測器 Arduino Sensor DFRobot原廠
NT$286 NT$240 未稅
這是一種通用的Arduino氣體傳感器。它具有MQ2探針,能夠檢測 LPG,異丁烷,丙烷,甲烷,酒精,氫氣,煙霧。
它可用於消費和工業市場的氣體洩漏檢測裝置。它具有高靈敏度和快速響應時間。
尚有庫存
- 商品說明
商品說明
Gravity: Analog Gas Sensor MQ2 煙霧/氣體感測器 Arduino Sensor
Analog Gas Sensor 氣體傳感器是基於氣敏元件的 MQ2 氣體 感測器,可以很靈敏的檢測到空氣中的煙霧、液化氣、丁烷、丙烷、甲烷、酒精、氫氣等氣體。
與Arduino專用傳感器擴展板結合使用,可以製作火災煙霧報警、液化氣、丁烷、丙烷、甲烷、酒精、氫氣氣體洩露報警等相關的作品。
運行電壓適應3.3V和5V供電。小板上的端口邊上有一個大寫的A,標明這是一個模擬的傳感器。
小板上帶有高品質接頭,能夠經受上萬次插拔,保證接觸牢固,良好。沈金工藝,不僅保證模塊的性能,而且帶有金色光澤。
連接圖
規格
- 具有輸出調節電位器:順時針調節大,逆時針調節小。
- 接口類型:模擬
- 檢測範圍廣
- 快速響應和高靈敏度
- 簡單的驅動電路
- 3.3V或者5V供電
- 尺寸:36.4×26.6mm(1.4×1”)
出貨清單
- Arduino 氣體傳感器(MQ2) x1
- 連接線 x1
Documents
=========================================================
Gravity: Analog Gas Sensor (MQ2) For Arduino
This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.
To ease the difficulty of using this sensor, a Gravity Interface is adapted to allow plug&play. The Arduino IO expansion shield is the best match for this senor connecting to your Arduino. As this sensor can work at 3.3V which makes it compatible with Raspberry Pi, intel edison, joule and curie.
Improvement List
- Standard assembling structure (Times-of-5mm Center distance between two 3mm mounting holes)
- Easily recognitive interfaces of sensors (“A” for analog and “D” for digital)
- Icons to simplely illustrate sensor function
- High quality connector
- Immersion gold surface
SPECIFICATION
- Power supply needs: 5V
- Interface type: Analog
- Wide detecting scope
- Fast response and High sensitivity
- Simple drive circuit
- Stable and long life
- Size:36.4×26.6mm (1.4×1”)
DOCUMENTS
SHIPPING LIST
- Arduino Gas Sensor (MQ2) x1
- Gravity Analog Cable x1
相關商品
-
Grove – Gas Sensor(MQ3) 酒精濃度 氣體 感測器模組 seeed原廠
0 滿分 5 分它可以檢測酒精,汽油,甲烷,己烷,液化石油氣,CO 其感測速度與回應的非常靈敏快速。也靈敏度可以由電位進行調整。
NT$362NT$240 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Rotary Angle Sensor 旋轉角度電位器模組 seeed原廠
0 滿分 5 分加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
高感度麥克風感測器模組
0 滿分 5 分NT$62NT$38 未稅加入購物車Quick View -
加入購物車Quick View
Force Sensitive Resistor – FSR400 Small 電阻式壓力感測器 SparkFun原廠
0 滿分 5 分直徑為0.16“(4 mm)的有源感應區域,Interlink Electronics的FSR會根據傳感區域的壓力而改變其阻力,力越強,電阻越小,當沒有壓力應用於FSR,其電阻將大於1MΩ,全壓施加電阻為2.5kΩ。
加入購物車Quick View -
加入購物車Quick View
MAX471 電壓檢測 電流檢測模組 電壓感測器 電流感測器
0 滿分 5 分電流檢測採用美國美信公司生產的精密高端電流檢測放大器晶片MAX471
加入購物車Quick View -
Grove – RTC 高精度時間模組 seeed原廠
0 滿分 5 分支持I2C協議的時鐘芯片DS1307。它使用鋰電池(CR1225)。時鐘/日曆提供秒,分,小時,日,日,月和年信息。
NT$271NT$220 未稅加入購物車Quick View -
MQ-135 空氣品質檢測感測器模組 (酒精、煙霧、甲醛) V1.3黑版
0 滿分 5 分NT$286NT$160 未稅加入購物車Quick View -
Analog pH Meter Pro Sensor 模擬檢測 PH值(專業版) 相容Arduino DFRobot原廠
0 滿分 5 分NT$2,667NT$2,460 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ2) 煙霧氣體感測器 seeed原廠
0 滿分 5 分檢測的氣體包括異丁烷,液化石油氣,甲烷,乙醇,氫氣,煙霧等。感測器的回應速度快,便於實際的測量。通過板上的電位器調整輸出精度
NT$257NT$220 未稅加入購物車Quick View