FTDI Basic Breakout – 5V FT232RL晶片 SparkFun原廠
NT$695 NT$500 未稅
尚有庫存
- 商品說明
商品說明
FTDI Basic Breakout – 5V FT232RL晶片 美國 SparkFun 原裝進口
這是 Sparkfun FTDI Basic 的最新版本。我底部使用SMD 6針頭,這使得它更小更緊湊。功能一直保持不變。這是FTDI FT232RL USB串行IC的功能擴展板。該板的引腳排列與FTDI電纜匹配使用官方Arduino和副廠的5V Arduino板。它也可以用於一般串行應用。與該板的主要區別在於它引出DTR引腳,而不是FTDI電纜的RTS引腳。當下載新的草圖時,DTR引腳允許Arduino目標自動復位。這是一個非常好的功能,讓您可以下載草圖,而無需點擊重置按鈕。
標記為BLK和GRN的引腳對應於FTDI電纜上的有色導線。FTDI電纜上的黑線為GND,綠色為CTS。使用這些BLK和GRN引腳將FTDI基板與Arduino目標對齊。該電路板具有TX和RX LED,通過FTDI電纜可以更好地使用。您實際上可以看到LED上的串行流量,以驗證電路板是否正常工作。該板旨在降低Arduino開發成本,並提高易用性(自動重置功能!)。我們的Arduino Pro板和LilyPads使用這種類型的連接器。該板的一個很好的功能是板背面的跳線,允許將板配置為3.3V或5V(電源輸出和IO電平)。該闆卡默認為5V,但如果需要切換到3.3V,則可以切斷默認軌跡並添加焊接跳線。
Document
=========================================================
SparkFun FTDI Basic Breakout – 5V
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.
The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.
This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.
This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.
One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.
Documents:
- Schematic
- Eagle Files
- USB to serial UART Boards Hookup Guide
- How to Install FTDI Drivers
- FTDI Drivers
- GitHub (Design Files)
相關商品
-
SAMD21 Mini Breakout SparkFun原廠
0 滿分 5 分NT$810NT$720 未稅加入購物車Quick View -
加入購物車Quick View
Teensy Arduino Shield Adapter (Teensy擴展板 相容於Arduino) SparkFun原廠
0 滿分 5 分Teensy是一款很簡易開發平臺,您可以將其結合Arduino, Teensy Arduino Shield擴展板提供了這樣的功能
加入購物車Quick View -
MEGA 感測器擴展板 V2.4 Arduino通用 Xbee 藍芽串口 SD卡座 DFRobot原廠
0 滿分 5 分NT$743NT$560 未稅加入購物車Quick View -
Gravity: Bluno Beetle Shield Beetle BLE 多功能擴展板 DFRobot原廠
0 滿分 5 分只要按照說明,將Bluno Beetle焊接在上面,你就可以直插3pin的傳感器和其他擴展設備。另外,擴展板還具備外接電源接口,可直接外接供電。
NT$333NT$260 未稅加入購物車Quick View -
MCP4725 模組 I2C DAC Breakout 開發板 附排針
0 滿分 5 分MCP4725是具有非易失性存儲器(EEPROM)的單通道12位緩衝電壓輸出DAC。 用戶可將配置寄存器位(2位)和DAC輸入數據(12位)存儲到非易失性EEPROM(14位)存儲器中。通過設置配置寄存器位可以把DAC配置成正常模式或節省功耗的關斷模式。 器件可以使用2線I2C兼容串行接口,且由電壓範圍為2.7V至5.5V的單電源供電。
出貨附排針
NT$179NT$100 未稅加入購物車Quick View -
加入購物車Quick View
Gravity:Analog Electrical Conductivity Sensor / Meter 模擬電導率感測器 液體檢測 水質監測 相容Arduino、樹莓派
0 滿分 5 分Gravity:模擬電導率計專門用於測量水溶液的電導率值,評估水質狀況,產品配合主控板與配套的軟件庫,就可迅速搭建出一套電導率檢測儀,即插即用,無需焊接。
K值差異(1/10)簡單說就是可檢測液體濃度的差別,K=1檢測一般水,K=10檢測海水
加入購物車Quick View -
Arduino 實驗通用零件包
0 滿分 5 分Arduino 實驗通用零件包
有了這款配置好的元件包之後,玩arduino 基本上就不需要再去買什麼零星的電子物料了
NT$143NT$100 未稅加入購物車Quick View -
加入購物車Quick View
開發板電源供應器 變壓器 外接電源 100V~240VAC轉 9V1A 穩壓電路
0 滿分 5 分輸入電壓:AC(交流)100V-240V 50-60Hz
輸出電壓:DC(直流)9V
額定輸出電流:1A
輸出DC介面:外徑5.5mm內徑2.1mm
插頭極性:內正外負
產品優勢:採用全新線路板以及元器件加入購物車Quick View -
Piezo Igniter 壓電點火器 點火開關 SparkFun原廠
0 滿分 5 分NT$400NT$380 未稅加入購物車Quick View -
副廠 Esplora 遊戲機開發控制板 GamePad 採用原廠晶片支援Arduino
0 滿分 5 分Esplora 是 Leonardo 的增強版,控制晶片依舊採用Leonardo用的Atmega32U4,可以直接控制USB與上位機的通信,模擬PC機的鍵盤和鼠標等外設。Esplora最突出的特性是增加了幾個內建的輸入設備和傳感器,還有幾個輸入輸出接口。
NT$848NT$790 未稅加入購物車Quick View