ESP8266 Thing-Dev Board 開發板 (已焊針腳) SparkFun原廠

NT$640 未稅

 

這是SparkFun ESP8266 Thing開發板 – 一款專門圍繞ESP8266設計的開發板,集成了FTDI USB至串行芯片。

尚有庫存

  • 商品說明

商品說明

ESP8266 Thing – Dev Board (with Headers) 開發板

這是 SparkFun ESP8266 Thing 開發板 – 一款專門圍繞ESP8266設計的開發板,集成了FTDI USB至串行芯片。 ESP8266是一款具有成本效益且功能強大的支持WiFi的微控制器。像任何微控制器一樣,它可以編程為閃爍LED,觸發繼電器,監測傳感器或自動化咖啡機。通過一個集成的WiFi控制器,ESP8266是幾乎所有與互聯網連接的項目的一站式商店。最重要的是,ESP8266非常易於使用;固件可以在Arduino中開發並通過簡單的串行接口上​​傳。 ESP8266 Thing開發板使用預先焊接的插頭打破了所有模塊的引腳,而USB到串行轉換器意味著您不需要任何外設組件來編程芯片。只需插入USB電纜,下載Arduino電路板定義,然後開始IoT-ing。

SparkFun ESP8266東西 - 開發板(帶接頭)

為什麼這個名字?

由於它是物聯網(IoT)項目的完美基礎,我們將它稱為“事物”。 Thing通過phant.io完成從開啟LED到發布數據等任何事情,並且可以像任何微控制器一樣進行編程。您甚至可以通過安裝ESP8266 Arduino插件,通過Arduino IDE對Thing進行編程。

ESP8266事物開發板是一個相對簡單的電路板。引腳分成兩個並行的麵包板兼容行。 USB連接器位於一個可選電源輸入旁邊,一個ON / OFF開關 – 控制ESP8266的電源 – 位於旁邊。朝向電路板內部的LED指示IC的電源,充電和狀態。 ESP8266的最大電壓為3.6V,因此Thing擁有板載3.3V穩壓器,可為IC提供安全穩定的電壓。這意味著ESP8266的I / O引腳也運行在3.3V;你需要將流入IC的5V信號進行電平轉換。如果您的項目需要USB以外的電源,則Thing Dev Board包含2腳JST,2腳3.5mm螺絲端子或簡單的0.1英寸2腳接頭的腳印,與原始ESP8266 Thing不同, ESP8266 Thing Dev Board沒有內置的LiPo充電器。

Thing開發板甚至包括一個PCB跡線天線作為默認WiFi天線。它具有成本效益,效果非常好!如果您需要連接更靈敏的天線,或者需要在機箱外部佈線,則還可以在主板上使用U.FL連接器。為了使U.FL連接器正常工作,需要一些焊接,但是可以在我們為開發板編寫的“連接指南”中找到說明。

 

特徵

  • 所有模塊引腳都斷開了
  • 板載FTDI USB轉串口
  • 802.11 b / g / n
  • WiFi Direct(P2P),軟AP
  • 集成的TCP / IP協議棧
  • 集成TR開關,巴倫,LNA,功率放大器和匹配網絡
  • 集成PLL,穩壓器,DCXO和電源管理單元
  • 集成的低功耗32位CPU可用作應用處理器
  • 802.11b模式下輸出功率+ 19.5dBm
  • 預焊接頭

Documents

 

=========================================================

 

This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink LEDs, trigger relays, monitor sensors or automate coffee makers. With an integrated WiFi controller, the ESP8266 is a one-stop shop for almost any internet-connected project. To top it all off, the ESP8266 is incredibly easy to use; firmware can be developed in Arduino and uploaded over a simple serial interface. The ESP8266 Thing Development Board breaks out all of the module’s pins with pre-soldered headers, and the USB-to-serial converter means you don’t need any peripheral components to program the chip. Just plug in a USB cable, download the Arduino board definitions, and start IoT-ing.

Features

  • All module pins broken out
  • Onboard FTDI USB-to-Serial
  • 802.11 b/g/n
  • WiFi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLLs, regulators, DCXO and power management units
  • Integrated low-power 32-bit CPU could be used as application processor
  • +19.5dBm output power in 802.11b mode
  • Pre-Soldered Heade