ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
NT$619 NT$560 未稅
ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。該Thing是低成本和易於使用,和Arduino IDE集成可以在短短幾個步驟實現。我們通過打開所有模塊的引腳,添加了LiPo充電器,電源和所需的其他所有支持電路,使ESP8266易於使
尚有庫存
- 商品說明
商品說明
SparkFun ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。該Thing是低成本和易於使用,和Arduino IDE集成可以在短短幾個步驟實現。我們通過打開所有模塊的引腳,添加了LiPo充電器,電源和所需的其他所有支持電路,使ESP8266易於使用。
SparkFun ESP8266 Thing是一個相對簡單的板。引腳分為兩個平行的麵包板兼容行。板頂部的USB和LiPo連接器通過附近的ON / OFF開關控制提供電源。朝向板內部的LED指示IC的功率,電荷和狀態。ESP8266的最大電壓為3.6V,因此Thing具有板載3.3V穩壓器,可為IC提供安全,一致的電壓。這意味著ESP8266的I / O引腳也運行在3.3V,你需要電平轉換任何5V信號運行到IC。需要3.3V FTDI Basic來編程SparkFun ESP8266 Thing,但是具有3.3VI / O電平的其他串行轉換器也應該工作得很好。
Features:
- All module pins broken out
- On-board LiPo charger/power supply
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- Integrated low power 32-bit CPU could be used as application processor
- +19.5dBm output power in 802.11b mode
Documents:
- Schematic
- Eagle Files
- Hookup Guide
- ESP8266 Powered Propane Poofer
- Graphical Datasheet
- Cloud Clouds IoT Demo
- GitHub (Design Files)
SparkFun ESP8266 Thing
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps. We’ve made the ESP8266 easy to use by breaking out all of the module’s pins, adding a LiPo charger, power supply, and all of the other supporting circuitry it requires.
Why the name? We lovingly call it the “Thing” due to it being the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with phant.io, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the ESP8266 Arduino addon.
The SparkFun ESP8266 Thing is a relatively simple board. The pins are broken out to two parallel, breadboard-compatible rows. USB and LiPo connectors at the top of the board provide power – controlled by the nearby ON/OFF switch. LEDs towards the inside of the board indicate power, charge, and status of the IC. The ESP8266’s maximum voltage is 3.6V, so the Thing has an onboard 3.3V regulator to deliver a safe, consistent voltage to the IC. That means the ESP8266’s I/O pins also run at 3.3V, you’ll need to level shift any 5V signals running into the IC. A 3.3V FTDI Basic is required to program the SparkFun ESP8266 Thing, but other serial converters with 3.3V I/O levels should work just fine as well. The converter does need a DTR line in addition to the RX and TX pins.
相關商品
-
Adafruit HUZZAH ESP8266 Breakout
0 滿分 5 分Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
NT$457NT$440 未稅加入購物車Quick View -
NodeMCU-32S WiFi 物聯網開發板 相容ESP-32S 提供WiFi+藍牙 CH340版本
0 滿分 5 分WiFi+藍牙4.2+BLE/雙核CPU/Lua語言/像Arduino一樣操作硬件IO/用 Nodejs 類似語法寫網絡應用/超高性能、低成本的WiFi+藍牙模組「ESP-32S」NodeMCU 是一個開源的物聯網平台。它使用Lua腳本語言編程。該平台基於eLua開源項目。「NodeMCU-32S」基於ESP-32S模組。該平台使用了很多開源項目,例如lua-cjson, spiffs. 「NodeMCU-32S」包含了可以運行在ESP32 Wi-Fi SoC芯片之上的固件,以及基於ESP-32S模組的硬件。ESP32是上海Espressif研發的WiFi+藍牙芯片,旨在為嵌入式類產品提供接入網絡的功能。
NT$286NT$180 未稅加入購物車Quick View -
NodeMcu Lua V3 ESP-12N ESP8266 WiFi物聯網開發板 CP2102
0 滿分 5 分V3開發板有2款版本 一款是用CH340接口晶片 一款是CP2102接口晶片,大小有區別(CH340比較大片),性能一樣
NT$219NT$140 未稅加入購物車Quick View -
Grove Base Shield for NodeMCU 擴展板 seeed原廠
0 滿分 5 分NT$305NT$240 未稅加入購物車Quick View -
ESP8266 串口 WIFI模組 遠距離 無線模組 ESP-07
0 滿分 5 分半孔貼片工藝,所有IO引出,帶金屬屏蔽殼,可過FCC CE認證,可外接IPX天線,也可用內置陶瓷天線
NT$143NT$100 未稅加入購物車Quick View -
ESP8266 ESP-01S Relay 繼電器 插座模組 WIFI 智慧插座
0 滿分 5 分本智慧繼電器模組插座基於ESP-01S WIFI 模組設計,可用於DIY 自己的智慧開關,
可以通過手機APP遠端 控制,提供APP和LUA 根源程式。即拿即用,簡單方便。
本商品不包含 ESP-01S模組,若有需要請額外購買。
NT$238NT$171 未稅加入購物車Quick View -
ESP8266 Thing 物聯網開發板 SparkFun原廠
0 滿分 5 分SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。
NT$905NT$720 未稅加入購物車Quick View -
NodeMCU Lua V2 – Lua based ESP8266 development kit 基於 ESP8266 ESP-12E wifi 開發板 CP2102
0 滿分 5 分NodeMcu 開源快速硬體原型平臺,包括固件和開發板,用幾行簡單的Lua腳本就能開發物聯網應用
- ESP8266 NodeMCU Lua v2 開發平台具有GPIO、PWM、I2C、1-Wire、ADC等功能,可為您的原型開發提供最快速的途徑
- 採用 32 位元物聯網專用 SOC 微控制器,可快速整合電腦、手機或其他 WiFi 相關裝置,讓您的設備輕鬆連接到物聯網
- 支援 802.11 b/g/n Protocol
- 支援 STA/AP/STA+AP 三種工作模式
- NodeMCU Lua v2 之 USB to TTL 晶片,已改用功能更完整、穩定的 SiLab CP2102,可隨插即用
NT$286NT$190 未稅加入購物車Quick View -
NodeMcu Lua WIFI V3 物聯網 開發板 ESP8266 wifi模組 接口 CH-340
0 滿分 5 分NT$171NT$100 未稅加入購物車Quick View -
加入購物車Quick View
Wemos D1 Pro mini-16m 基於 ESP-8266EX 的迷你WiFi 開發板
0 滿分 5 分- 1個數字輸入/輸出引腳
- Interrupt 中斷/ PWM / I2C /one-wire
- 1路模擬輸入(3.2V最大輸入)
- 16M bit Flash
- 外部天線連接器
- 內置陶瓷天線
- 新型CP2104 USB-TO-UART IC
加入購物車Quick View