ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
NT$619 NT$560 未稅
ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。該Thing是低成本和易於使用,和Arduino IDE集成可以在短短幾個步驟實現。我們通過打開所有模塊的引腳,添加了LiPo充電器,電源和所需的其他所有支持電路,使ESP8266易於使
尚有庫存
- 商品說明
商品說明
SparkFun ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。該Thing是低成本和易於使用,和Arduino IDE集成可以在短短幾個步驟實現。我們通過打開所有模塊的引腳,添加了LiPo充電器,電源和所需的其他所有支持電路,使ESP8266易於使用。
SparkFun ESP8266 Thing是一個相對簡單的板。引腳分為兩個平行的麵包板兼容行。板頂部的USB和LiPo連接器通過附近的ON / OFF開關控制提供電源。朝向板內部的LED指示IC的功率,電荷和狀態。ESP8266的最大電壓為3.6V,因此Thing具有板載3.3V穩壓器,可為IC提供安全,一致的電壓。這意味著ESP8266的I / O引腳也運行在3.3V,你需要電平轉換任何5V信號運行到IC。需要3.3V FTDI Basic來編程SparkFun ESP8266 Thing,但是具有3.3VI / O電平的其他串行轉換器也應該工作得很好。
Features:
- All module pins broken out
- On-board LiPo charger/power supply
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- Integrated low power 32-bit CPU could be used as application processor
- +19.5dBm output power in 802.11b mode
Documents:
- Schematic
- Eagle Files
- Hookup Guide
- ESP8266 Powered Propane Poofer
- Graphical Datasheet
- Cloud Clouds IoT Demo
- GitHub (Design Files)
SparkFun ESP8266 Thing
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps. We’ve made the ESP8266 easy to use by breaking out all of the module’s pins, adding a LiPo charger, power supply, and all of the other supporting circuitry it requires.
Why the name? We lovingly call it the “Thing” due to it being the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with phant.io, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the ESP8266 Arduino addon.
The SparkFun ESP8266 Thing is a relatively simple board. The pins are broken out to two parallel, breadboard-compatible rows. USB and LiPo connectors at the top of the board provide power – controlled by the nearby ON/OFF switch. LEDs towards the inside of the board indicate power, charge, and status of the IC. The ESP8266’s maximum voltage is 3.6V, so the Thing has an onboard 3.3V regulator to deliver a safe, consistent voltage to the IC. That means the ESP8266’s I/O pins also run at 3.3V, you’ll need to level shift any 5V signals running into the IC. A 3.3V FTDI Basic is required to program the SparkFun ESP8266 Thing, but other serial converters with 3.3V I/O levels should work just fine as well. The converter does need a DTR line in addition to the RX and TX pins.
相關商品
-
NodeMcu 底座擴展板 NodeMcu Lua WIFI 開發板 ESP8266 串口擴展板 For V3 CH340版本
0 滿分 5 分NT$143NT$114 未稅加入購物車Quick View -
Blynk Board – ESP8266 Blynk 開發板 SparkFun原廠
0 滿分 5 分Blynk是一款易於使用的應用程序生成器,它允許用戶將各種按鈕,滑塊,圖形顯示甚至RGB控制器添加到手機中。
NT$1,429NT$1,100 未稅加入購物車Quick View -
2.4G zigbee CC2530 無線串口收發模組 DL-20 250米長距離
0 滿分 5 分2.4G zigbee CC2530 無線串口收發模組 CC2530 數據透傳 支援點對點廣播模式 TTL
本模組可以實現串口資料透傳,使用它就像使用一個串口模組一樣簡單。你無需瞭解複雜的ZigBee協定,卻擁有ZigBee網路的優勢。
- TI CC2530 完全相容符合2.4G IEEE 802.15.45之規範
- TI CC2530 完全符合ZigBee PRO(ZigBee 2007)協議規範
- 支援 UART 串口介面
NT$476NT$340 未稅加入購物車Quick View -
加入購物車Quick View
mini D1 wifi NodeMcu Lua WIFI 基於ESP8266 開發板 D1 Mini ESP-12F
0 滿分 5 分加入購物車Quick View -
NodeMcu Lua V3 ESP-12N ESP8266 WiFi物聯網開發板 CP2102
0 滿分 5 分V3開發板有2款版本 一款是用CH340接口晶片 一款是CP2102接口晶片,大小有區別(CH340比較大片),性能一樣
NT$219NT$140 未稅加入購物車Quick View -
加入購物車Quick View
Wemos D1 Pro mini-16m 基於 ESP-8266EX 的迷你WiFi 開發板
0 滿分 5 分- 1個數字輸入/輸出引腳
- Interrupt 中斷/ PWM / I2C /one-wire
- 1路模擬輸入(3.2V最大輸入)
- 16M bit Flash
- 外部天線連接器
- 內置陶瓷天線
- 新型CP2104 USB-TO-UART IC
加入購物車Quick View -
ESP-07S ESP8266 串口轉WIFI模組 工業級 低功耗 WIFI無線模組 FCC認證 安信可公司貨
0 滿分 5 分NT$114NT$100 未稅加入購物車Quick View -
NodeMCU-32S WiFi 物聯網開發板 相容ESP-32S 提供WiFi+藍牙 CH340版本
0 滿分 5 分WiFi+藍牙4.2+BLE/雙核CPU/Lua語言/像Arduino一樣操作硬件IO/用 Nodejs 類似語法寫網絡應用/超高性能、低成本的WiFi+藍牙模組「ESP-32S」NodeMCU 是一個開源的物聯網平台。它使用Lua腳本語言編程。該平台基於eLua開源項目。「NodeMCU-32S」基於ESP-32S模組。該平台使用了很多開源項目,例如lua-cjson, spiffs. 「NodeMCU-32S」包含了可以運行在ESP32 Wi-Fi SoC芯片之上的固件,以及基於ESP-32S模組的硬件。ESP32是上海Espressif研發的WiFi+藍牙芯片,旨在為嵌入式類產品提供接入網絡的功能。
NT$286NT$180 未稅加入購物車Quick View -
ESP8266 ESP-01S Relay 繼電器 插座模組 WIFI 智慧插座
0 滿分 5 分本智慧繼電器模組插座基於ESP-01S WIFI 模組設計,可用於DIY 自己的智慧開關,
可以通過手機APP遠端 控制,提供APP和LUA 根源程式。即拿即用,簡單方便。
本商品不包含 ESP-01S模組,若有需要請額外購買。
NT$238NT$171 未稅加入購物車Quick View -
Micro 控制器 5V/16MHz ATmega32u4 Leonardo Mini 外銷版 已焊針腳 附傳輸線
0 滿分 5 分Micro 是基於Atmega32U4開發的迷你主控板。Micro有20路輸入輸出引腳(7路PWM輸出以及12路模擬輸入)。由於超小的尺寸,Micro可以非常容易的集成到小型麵包板上。受益於Atemga32U4,Arduino Micro和Arduino Leonardo一樣,可以實現USB通信以及控制。這種創新設計降低了成本。Atmega32u4的原生態支持USB特性還能讓Micro模擬成鼠標和鍵盤,極大地提高了應用場合。
NT$295NT$200 未稅加入購物車Quick View