ESP8266 Thing 物聯網開發板 SparkFun原廠
NT$905 NT$720 未稅
SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。
尚有庫存
- 商品說明
商品說明
ESP8266 Thing 物聯網開發板
SparkFun ESP8266 Thing 是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。該Thing是低成本和易於使用,和Arduino IDE集成可以在短短幾個步驟實現。我們通過打開所有模塊的引腳,添加了LiPo充電器,電源和所需的其他所有支持電路,使ESP8266易於使用。
SparkFun ESP8266 Thing是一個相對簡單的板。引腳分為兩個平行的麵包板兼容行。板頂部的USB和LiPo連接器通過附近的ON / OFF開關控制提供電源。朝向板內部的LED指示IC的功率,電荷和狀態。ESP8266的最大電壓為3.6V,因此Thing具有板載3.3V穩壓器,可為IC提供安全,一致的電壓。這意味著ESP8266的I / O引腳也運行在3.3V,你需要電平轉換任何5V信號運行到IC。需要3.3V FTDI Basic來編程SparkFun ESP8266 Thing,但是具有3.3VI / O電平的其他串行轉換器也應該工作得很好。
商品規格
- All module pins broken out
- On-board LiPo charger/power supply
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- Integrated low power 32-bit CPU could be used as application processor
- +19.5dBm output power in 802.11b mode
Documents
- Schematic
- Eagle Files
- Hookup Guide
- ESP8266 Powered Propane Poofer
- Graphical Datasheet
- GitHub (Design Files)
=========================================================
SparkFun ESP8266 Thing
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps. We’ve made the ESP8266 easy to use by breaking out all of the module’s pins, adding a LiPo charger, power supply, and all of the other supporting circuitry it requires.
Why the name? We lovingly call it the “Thing” due to it being the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with datastream, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the ESP8266 Arduino addon.
The SparkFun ESP8266 Thing is a relatively simple board. The pins are broken out to two parallel, breadboard-compatible rows. USB and LiPo connectors at the top of the board provide power – controlled by the nearby ON/OFF switch. LEDs towards the inside of the board indicate power, charge, and status of the IC. The ESP8266’s maximum voltage is 3.6V, so the Thing has an onboard 3.3V regulator to deliver a safe, consistent voltage to the IC. That means the ESP8266’s I/O pins also run at 3.3V, you’ll need to level shift any 5V signals running into the IC. A 3.3V FTDI Basic is required to program the SparkFun ESP8266 Thing, but other serial converters with 3.3V I/O levels should work just fine as well. The converter does need a DTR line in addition to the RX and TX pins.
- All module pins broken out
- On-board LiPo charger/power supply
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- Integrated low power 32-bit CPU could be used as application processor
- +19.5dBm output power in 802.11b mode
相關商品
-
NVIDIA® Jetson Nano ™ Developer Kit 開發套件 原廠公司貨 最新改良版 B01
0 滿分 5 分本賣場此款開發板保固期為30天,請注意!
NVIDIA®JetsonNano™開發板是適用於製造商,學習者和開發人員的小型AI計算機。
Jetson Nano 的 Power Jack 可支援 5 V/4 A 的DC輸入,可改用 Power Jack 而不使用 Micro–USB,如此在電源供應上會比較穩定,也會讓 Jetson Nano 執行比較順暢,不過記得 J48 要插上 jumper 後才會轉為由 Power jack 來供電。
加入購物車Quick View -
美國原廠官網指定經銷代理 Arduino MKR WIFI 1010 義大利製 原MKR1000升級版
0 滿分 5 分MKR WIFI 1010是MKR 1000 WIFI的重大改進。它配備了由U-BLOX製造的ESP32模塊。該板旨在通過ESP32模塊的靈活性和低功耗來加速和簡化基於WiFi的物聯網應用的原型設計。
NT$1,714NT$1,500 未稅加入購物車Quick View -
Spartan Edge Accelerator 開發板 – 帶有ESP32的Arduino FPGA Shield seeed原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
Leonardo R3 副廠開發板 ATmega32u4原廠晶片 通過美國FCC認證 附傳輸線
0 滿分 5 分Leonardo它有20個數字輸入輸出口,7個PWM口以及12個模擬輸入口。相比其它版本的Arduino使用獨立的USB-Serial轉換芯片,Leonardo創新的採用了單芯片解決方案。只用了一片Atmega32u4來實現USB通信以及控制。這種創新設計降低了Leonardo的成本。
加入購物車Quick View -
Teensy 3.6 開發板 Cortex®-M4F 開發板 SparkFun原廠
0 滿分 5 分SparkFun的 Teensy 3.6 是一個功能豐富的試驗板友好型開發板,由PJRC設計,預裝引導程序。這樣就可以輕鬆使用板載USB連接進行編程,而不需要外部編程器。
加入購物車Quick View -
加入購物車Quick View
Maixduino K210 RISC-V AI+lOT ESP32 AI 開發板
0 滿分 5 分Maixduino 採用 Arduino Uno 外形設計,板載 ESP32 模組和 MAIX AI 模組的開發板。
加入購物車Quick View -
樹莓派 Raspberry Pi 1 Model A+開發板 英國製
0 滿分 5 分Raspberry Pi 1 Model A+與 A板的主要區別在於它具有一個USB 2.0端口。
加入購物車Quick View -
ESP-EYE 人臉識別、語音識別開發板,搭載ESP32芯片 DFRobot原廠
0 滿分 5 分該產品是一款面向人臉識別和語音識別市場的開發板,搭載ESP32芯片、200W像素攝像頭、數字麥克風、8MB PSRAM和4MB Flash,可滿足各種AI應用開發需求。此外,該開發板還支持WiFi圖像傳輸、Micro USB調試和供電,可以實現語音喚醒、人臉檢測與識別等功能,可協助用戶開發高度集成的AI解決方案。
NT$1,524NT$1,380 未稅加入購物車Quick View -
Sipeed Maixduino Kit for RISC-V AI + IoT seeed原廠
0 滿分 5 分加入購物車Quick View -
Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 & Wi-Fi & 2.4”LCD Screen1
0 滿分 5 分NT$1,238NT$1,140 未稅加入購物車Quick View