ESP8266 Thing 物聯網開發板 SparkFun原廠
NT$905 NT$720 未稅
SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。
尚有庫存
- 商品說明
商品說明
ESP8266 Thing 物聯網開發板
SparkFun ESP8266 Thing 是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。該Thing是低成本和易於使用,和Arduino IDE集成可以在短短幾個步驟實現。我們通過打開所有模塊的引腳,添加了LiPo充電器,電源和所需的其他所有支持電路,使ESP8266易於使用。
SparkFun ESP8266 Thing是一個相對簡單的板。引腳分為兩個平行的麵包板兼容行。板頂部的USB和LiPo連接器通過附近的ON / OFF開關控制提供電源。朝向板內部的LED指示IC的功率,電荷和狀態。ESP8266的最大電壓為3.6V,因此Thing具有板載3.3V穩壓器,可為IC提供安全,一致的電壓。這意味著ESP8266的I / O引腳也運行在3.3V,你需要電平轉換任何5V信號運行到IC。需要3.3V FTDI Basic來編程SparkFun ESP8266 Thing,但是具有3.3VI / O電平的其他串行轉換器也應該工作得很好。
商品規格
- All module pins broken out
- On-board LiPo charger/power supply
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- Integrated low power 32-bit CPU could be used as application processor
- +19.5dBm output power in 802.11b mode
Documents
- Schematic
- Eagle Files
- Hookup Guide
- ESP8266 Powered Propane Poofer
- Graphical Datasheet
- GitHub (Design Files)
=========================================================
SparkFun ESP8266 Thing
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps. We’ve made the ESP8266 easy to use by breaking out all of the module’s pins, adding a LiPo charger, power supply, and all of the other supporting circuitry it requires.
Why the name? We lovingly call it the “Thing” due to it being the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with datastream, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the ESP8266 Arduino addon.
The SparkFun ESP8266 Thing is a relatively simple board. The pins are broken out to two parallel, breadboard-compatible rows. USB and LiPo connectors at the top of the board provide power – controlled by the nearby ON/OFF switch. LEDs towards the inside of the board indicate power, charge, and status of the IC. The ESP8266’s maximum voltage is 3.6V, so the Thing has an onboard 3.3V regulator to deliver a safe, consistent voltage to the IC. That means the ESP8266’s I/O pins also run at 3.3V, you’ll need to level shift any 5V signals running into the IC. A 3.3V FTDI Basic is required to program the SparkFun ESP8266 Thing, but other serial converters with 3.3V I/O levels should work just fine as well. The converter does need a DTR line in addition to the RX and TX pins.
- All module pins broken out
- On-board LiPo charger/power supply
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- Integrated low power 32-bit CPU could be used as application processor
- +19.5dBm output power in 802.11b mode
相關商品
-
Seeeduino Nano 開發板 Atmega328P晶片 seeed原廠 附Type-C傳輸線
0 滿分 5 分Seeeduino Nano提供與Arduino Nano相同的功能和高品質的體驗。它與引腳和尺寸的Arduino Nano完全兼容。
NT$367NT$300 未稅加入購物車Quick View -
UNO Rev3 副廠開發板 通過美國FCC認證 相容Arduino 環保材質 附1.3m長傳輸線
0 滿分 5 分- 通過美國FCC認證
- 使用全新Atmega 16U2 晶片替代 8U2.意味著更高的傳輸速率和memory.
- 在Mac和Linux系統中無需安裝驅動。(在windows系統中需要Arduino IDE驅動)
- 增加了 SDA and SCL 介面
NT$400NT$380 未稅加入購物車Quick View -
美國原廠官網指定經銷代理 Arduino MKR WIFI 1010 義大利製 原MKR1000升級版
0 滿分 5 分MKR WIFI 1010是MKR 1000 WIFI的重大改進。它配備了由U-BLOX製造的ESP32模塊。該板旨在通過ESP32模塊的靈活性和低功耗來加速和簡化基於WiFi的物聯網應用的原型設計。
NT$1,714NT$1,500 未稅加入購物車Quick View -
ARDUINO MKR NB 1500 物聯網開發板 美國 Arduino原廠公司貨
0 滿分 5 分NT$3,333NT$3,190 未稅加入購物車Quick View -
Teensy 3.2 ARM Cortex-M4 Dev Board SparkFun原廠
0 滿分 5 分加入購物車Quick View -
Teensy 3.6 開發板 Cortex®-M4F 開發板 SparkFun原廠
0 滿分 5 分SparkFun的 Teensy 3.6 是一個功能豐富的試驗板友好型開發板,由PJRC設計,預裝引導程序。這樣就可以輕鬆使用板載USB連接進行編程,而不需要外部編程器。
加入購物車Quick View -
Teensy Prop Shield 開發板 SparkFun原廠
0 滿分 5 分Teensy Pro Shield用在小型手持或穿戴裝置上製作互動式燈光和音效。板子內建10DoF(自由度)運動感測器,2W音頻放大器,跟高速5V緩衝器以及8MB快閃記憶體。
NT$1,219NT$1,060 未稅加入購物車Quick View -
加入購物車Quick View
Teensy 4.0 Cortex-M7 600MHz 完全相容 Teensy 3.2 SparkFun原廠
0 滿分 5 分加入購物車Quick View -
樹莓派Pico Raspberry Pi Pico 微控制器開發板 RP2040雙核處理器 送排針 支援Arduino IDE
0 滿分 5 分NT$143NT$120 未稅加入購物車Quick View -
Sipeed Maixduino Kit for RISC-V AI + IoT seeed原廠
0 滿分 5 分加入購物車Quick View