CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 DFRobot原廠
NT$762 NT$680 未稅
尚有庫存
- 商品說明
商品說明
CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 等開發板
CAN-BUS Shield V2.0 是專為Arduino控制器設計的擴展板,板載MCP2515匯流排控制晶片能夠實現CAN匯流排上的資料控制,實現設備與設備之間的資料通信。擴展板相容Arduino標準卡槽,可以完美適配於Arduino UNO,Leonardo等主控板。並且提供一個DB9和一個接線柱形式的介面,您可以根據需要自主選擇介面。內嵌MicroSD卡槽,可直插MicroSD卡,存儲資料。多種擴展介面使得用戶在DIY過程中得到更大的便利。
接口說明
兩種供電方式:
Power Switch處於“ON”端,電源由DB9接口的供電
Power Switch處於“OFF”端,電源由Arduino主板供應
注意:
- 當DP9接口處的電壓大於7V時可以為arduino主控板供電,開關選擇”ON“;
- 如果arduino主板是usb供電,那麼USB和DB9可以同時供電;如果arduino是DC-Vin電源供電,DB9就不能同時供電了,必須將開關置於”OFF“處
特徵
- 支持標準幀、擴展幀收發,支持輪訓和中斷兩種接收方式
- 提供uart、I2C、DB9及接線柱等多種接口
- 支持SD卡數據存儲
- 支持Arduino主板供電以及DB9接口供電
規格
- 芯片:MCP2515
- 供電:3.3~5VDC Arduino 主板供電/DB9接口供電
- 尺寸:76 mm * 54mm *19mm
- 重量:40g
出貨清單
- CAN-BUS Shield V2.0 x1
- 排針x1
Documents
=========================================================
CAN BUS Shield for Arduino
This is an Arduino Can Bus shield. It is compatible with the Arduino standard interface and can be stacked on an Arduino UNO, Leonardo or MEGA board.The shield integrates an MCP2515 CANBUS chip on the shield and has a CAN-BUS transceiver function. With an on-board DB9 and CAN-BUS connector you can choose a suitable port according to your host device.
There is also an integrated MicroSD socket for data storage – a perfect solution for data logging applications.
What is Canbus? Controller Area Network (CAN bus) is a vehicle bus standard designed to allow microcontrollers and devices to communicate with each other in applications without a host computer. It is a message-based protocol, designed originally for multiplex electrical wiring within automobiles, but is also used in many other contexts.
FEATURES
- Supports standard frame, extended frame transmitting and receiving
- Supports two reception methods: Rotational and interrupt detection
- Supports UART, i2C and DB9 terminal interfaces
- Supports SD card data storage
- Supports Arduino mainboard power supply or DB9 power supply (Switch)
SPECIFICATION
- Chip: MCP2515
- Power supply: 3.3 ~ 5V Arduino board power supply or DB9 interface power supply
- Dimension: 76x54x19 (mm)/ 2.99×2.12×0.75 inches
- Weight: 40g
DOCUMENTS
SHIPPING LIST
- CAN-BUS Shield V2.0 x1
- 8-Pin header x1
相關商品
-
4G LTE 7S4 擴展板 RS232轉GPRS 開發擴展板 附贈電源供應器
0 滿分 5 分NT$933NT$838 未稅加入購物車Quick View -
MEGA 感測器擴展板 V2.4 Arduino通用 Xbee 藍芽串口 SD卡座 DFRobot原廠
0 滿分 5 分NT$743NT$560 未稅加入購物車Quick View -
WIFI ESP8266 模組轉接板 ESP-07 ESP-08 ESP-12 (不含模組)
0 滿分 5 分NT$48NT$29 未稅加入購物車Quick View -
Grove Base Hat for Raspberry Pi 擴展板 支援Pi-4B seeed原廠
0 滿分 5 分用於Raspberry Pi的Grove Base Hat提供數字/模擬/ I2C / PWM / UART端口,以滿足您的所有需求。在內置MCU的幫助下,Raspberry Pi還提供12位8通道ADC。
NT$476NT$420 未稅加入購物車Quick View -
gator:bit v2.0 – micro:bit Carrier Board 鱷魚擴展板 SparkFun原廠
0 滿分 5 分NT$762NT$680 未稅加入購物車Quick View -
weather:bit 氣象偵測擴充板 SparkFun原廠
0 滿分 5 分Weather:bit 擴充板,與micro:bit 結合使用時可為您提供功能齊全的氣象站。
NT$838NT$560 未稅加入購物車Quick View -
加入購物車Quick View
XIAO擴展板 Grove Shield轉接板 電源充電板 隨插即用 seeed原廠
0 滿分 5 分加入購物車Quick View -
micro: Breadboard 麵包板 擴展板 DFRobot原廠
0 滿分 5 分該擴展板適用於電子電路組裝,調試及訓練。micro:bit麵包板擴展板可應用於以micro:bit為基礎的各個項目,例如光控小燈,智能門鈴,溫度報警器等。
NT$500NT$420 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Mega Shield v1.2 Mega 2560 感測器 傳感器 擴展板 seeed原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
GrovePi+ Plus 樹莓派 Grove 插座式 擴充板 擴展板 seeed原廠 支援Pi 4B
0 滿分 5 分GrovePi+自帶15個Grove擴展口,可以完美兼容Raspberry Pi 3 Model B和B+跟最新的Pi 4B。
加入購物車Quick View