CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 DFRobot原廠
NT$762 NT$680 未稅
尚有庫存
- 商品說明
商品說明
CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 等開發板
CAN-BUS Shield V2.0 是專為Arduino控制器設計的擴展板,板載MCP2515匯流排控制晶片能夠實現CAN匯流排上的資料控制,實現設備與設備之間的資料通信。擴展板相容Arduino標準卡槽,可以完美適配於Arduino UNO,Leonardo等主控板。並且提供一個DB9和一個接線柱形式的介面,您可以根據需要自主選擇介面。內嵌MicroSD卡槽,可直插MicroSD卡,存儲資料。多種擴展介面使得用戶在DIY過程中得到更大的便利。
接口說明
兩種供電方式:
Power Switch處於“ON”端,電源由DB9接口的供電
Power Switch處於“OFF”端,電源由Arduino主板供應
注意:
- 當DP9接口處的電壓大於7V時可以為arduino主控板供電,開關選擇”ON“;
- 如果arduino主板是usb供電,那麼USB和DB9可以同時供電;如果arduino是DC-Vin電源供電,DB9就不能同時供電了,必須將開關置於”OFF“處
特徵
- 支持標準幀、擴展幀收發,支持輪訓和中斷兩種接收方式
- 提供uart、I2C、DB9及接線柱等多種接口
- 支持SD卡數據存儲
- 支持Arduino主板供電以及DB9接口供電
規格
- 芯片:MCP2515
- 供電:3.3~5VDC Arduino 主板供電/DB9接口供電
- 尺寸:76 mm * 54mm *19mm
- 重量:40g
出貨清單
- CAN-BUS Shield V2.0 x1
- 排針x1
Documents
=========================================================
CAN BUS Shield for Arduino
This is an Arduino Can Bus shield. It is compatible with the Arduino standard interface and can be stacked on an Arduino UNO, Leonardo or MEGA board.The shield integrates an MCP2515 CANBUS chip on the shield and has a CAN-BUS transceiver function. With an on-board DB9 and CAN-BUS connector you can choose a suitable port according to your host device.
There is also an integrated MicroSD socket for data storage – a perfect solution for data logging applications.
What is Canbus? Controller Area Network (CAN bus) is a vehicle bus standard designed to allow microcontrollers and devices to communicate with each other in applications without a host computer. It is a message-based protocol, designed originally for multiplex electrical wiring within automobiles, but is also used in many other contexts.
FEATURES
- Supports standard frame, extended frame transmitting and receiving
- Supports two reception methods: Rotational and interrupt detection
- Supports UART, i2C and DB9 terminal interfaces
- Supports SD card data storage
- Supports Arduino mainboard power supply or DB9 power supply (Switch)
SPECIFICATION
- Chip: MCP2515
- Power supply: 3.3 ~ 5V Arduino board power supply or DB9 interface power supply
- Dimension: 76x54x19 (mm)/ 2.99×2.12×0.75 inches
- Weight: 40g
DOCUMENTS
SHIPPING LIST
- CAN-BUS Shield V2.0 x1
- 8-Pin header x1
相關商品
-
UNO Proto Shield ProtoShield 原型擴展板 含麵包板
0 滿分 5 分ProtoShield原型擴展板上帶兩個LED和兩個按鈕電路,可以直接使用,全部引腳和電源均已引出,非常適合和Arduino配合構建電路原型。
NT$114NT$86 未稅加入購物車Quick View -
Grove Shield 擴展板 for Arduino Nano、Seeeduino Nano seeed原廠
0 滿分 5 分Grove Shield for Arduino Nano 擴展板是為Arduino Nano製作的,也可以與Seeeduino Nano一起使用 。在Grove系統的幫助下,您可以通過簡單的插頭將數百個Grove傳感器,Grove執行器和Grove顯示器連接到Arduino Nano。
NT$190NT$140 未稅加入購物車Quick View -
4G LTE 7S4 擴展板 RS232轉GPRS 開發擴展板 附贈電源供應器
0 滿分 5 分NT$933NT$838 未稅加入購物車Quick View -
SIM7000E Arduino NB-IoT/LTE/GPRS 擴展板 DFRobot原廠
0 滿分 5 分SIM7000E NB-IoT/LTE/GPRS 擴展板同時支援普通SIM卡和NB-IoT專用卡,可以插接普通SIM卡進行打電話、發短信等傳統GSM應用
NT$2,190NT$1,760 未稅加入購物車Quick View -
Gravity: Bluno Beetle Shield Beetle BLE 多功能擴展板 DFRobot原廠
0 滿分 5 分只要按照說明,將Bluno Beetle焊接在上面,你就可以直插3pin的傳感器和其他擴展設備。另外,擴展板還具備外接電源接口,可直接外接供電。
NT$333NT$260 未稅加入購物車Quick View -
weather:bit 氣象偵測擴充板 SparkFun原廠
0 滿分 5 分Weather:bit 擴充板,與micro:bit 結合使用時可為您提供功能齊全的氣象站。
NT$838NT$560 未稅加入購物車Quick View -
Grove – I2C Hub IIC/IO 擴展模組 seeed原廠
0 滿分 5 分I2C Hub Grove是一個擴展 Grove模塊,用於將多個I2C模組或感測器連接到Grove Base Shield。它可以連接最多7個I2C divices。
NT$124NT$100 未稅加入購物車Quick View -
SIM7000C NB-IoT / LTE / GPRS 相容Arduino 擴展板 DFRobot原廠
0 滿分 5 分SIM7000C NB-IoT/LTE/GPRS 擴展板同時支援普通SIM卡和NB-IoT專用卡,可以插接普通SIM卡進行打電話、發短信等傳統GSM應用
NT$2,190NT$1,760 未稅加入購物車Quick View -
Grove Inventor Kit for micro:bit 實驗套件組 可玩手勢辨識 seeed原廠
0 滿分 5 分本套件已經準備了10個Grove模塊,讓您開始使用micro:bit。使用這些Grove模塊,您可以測量距離並顯示它,使用手勢播放不同的音樂,或為您的辦公桌或房間設置智能防護裝置 。
NT$2,457NT$1,800 未稅加入購物車Quick View -
SIM7600G-H CAT4 4G(LTE) Shield 相容Arduino 擴展板 DFRobot原廠
0 滿分 5 分SIM7600G-H CAT4 4G(LTE)是一款高性價比的Arduino Shield,高速率網絡支持頻段覆蓋全球,帶有GNSS定位功能,適合有經驗的電子愛好者使用,是你部署項目的理想選擇。
NT$2,667NT$2,320 未稅加入購物車Quick View