Breakout for LinkIt Smart 7688 v2 / LinkIt Smart 7688 專用 Grove 擴充板 v2.0
NT$514 NT$380 未稅
Breakout for LinkIt Smart 7688 v2 Grove 擴充板 乙太網路接口、USB 、音樂、Grove I2C、串口接口
Breakout for LinkIt Smart 7688 集成了多個常用端口,例如以太網端口,3.5mm音頻端口和主機端口(USB Type-A連接器),用於更多外設,以及3個Grove端口為基於Grove的電子設備提供2個UART和1個I2C接口,可以節省您在智能IoT項目中進行佈線的大量工作,使您的快速原型更快。
尚有庫存
- 商品說明
商品說明
Breakout for LinkIt Smart 7688 v2 / LinkIt Smart 7688 專用 Grove 擴充板 v2.0
Breakout for LinkIt Smart 7688 集成了多個常用端口,例如以太網端口,3.5mm音頻端口和主機端口(USB Type-A連接器),用於更多外設,以及3個Grove端口為基於Grove的電子設備提供2個UART和1個I2C接口,可以節省您在智能IoT項目中進行佈線的大量工作,使您的快速原型更快。
應用思路
- IoT /網關設備
- 機器人
- 智能多媒體設備
- 智能音頻
- 教與學
特徵
- 3.5mm耳機插孔(帶麥克風),支持OMTP和CTIA
- 1個以太網連接互聯網
- 1個USB 2.0,用於更多外設
- Grove接口:2個UART,1個I2C
- 支持立體聲和AUX
- 支持錄音
- 每個立體聲端口1W輸出
查看更多linkit系列產品
Breakout for LinkIt Smart 7688 v2.0 is a Grove port integrated expansion board for LinkItTM Smart 7688 development board. This breakout board will help beginners to get started fast because it can save a lot of work and make prototyping easier through simplified wiring. It comes with USB, Ethernet, and 3.5mm Audio ports and supports serial buses like I2C, UART.
The board also integrates several frequently-used ports such as an Ethernet port, a 3.5mm audio port, and a Host port (USB Type-A Connector) for more peripherals, and along with 3 Grove ports to provide 2 UART and 1 I2C interfaces for the Grove-based electronics, it saves you a lot of work doing wirings in your smart IoT projects, makes your rapid prototyping even faster.
LinkIt Smart 7688 (a compact controller board) is an open development board, based on the OpenWrt Linux distribution, MT7688. The board is designed especially to enable the prototyping of Rich Application IoT devices for smart house.
Application Ideas
- IoT/Gateway Device
- Robotics
- Smart multimedia devices
- Smart Audio
- Teaching and learning
Features
- 3.5mm headphone Jack(with Mic) which support OMTP and CTIA
- 1 x Ethernet to connect internet
- 1 x USB 2.0 for more peripherals
- Grove interface: 2 x UART, 1 x I2C
- Stereo and AUX are supported
- Audio Recording supported
- 1W output for each stereo port
Technical Details
Weight | G.W 49g |
Battery | Exclude |
Input voltage | 5.0V(With USB Power port) |
Operating voltage | 3.3V |
Max Operating current | 2mA |
Min Operating current | 800mA |
Chip | WM8960 |
Analog pin input voltage(on WM8960 ) | 2.7~3.6V(Analog pin input voltage on WM8960 for stereo can reach 5.5V at Max.) |
Digital pin input voltage(on WM8960 ) | 1.71~3.6V |
相關商品
-
加入購物車Quick View
MediaTek Linkit smart 7688 開發板 聯發科晶片 原廠公司貨
0 滿分 5 分LinkIt Smart 7688 採用聯發科 MT7688AN晶片支援 OpenWrt Linux
加入購物車Quick View -
UNO Proto Shield ProtoShield 原型擴展板 含麵包板
0 滿分 5 分ProtoShield原型擴展板上帶兩個LED和兩個按鈕電路,可以直接使用,全部引腳和電源均已引出,非常適合和Arduino配合構建電路原型。
NT$114NT$86 未稅加入購物車Quick View -
CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 DFRobot原廠
0 滿分 5 分NT$762NT$680 未稅加入購物車Quick View -
micro:bit Boson 擴展板 (Gravity相容) 即插即用,附贈六條連接線,快速擴充 DFRobot原廠
0 滿分 5 分NT$381NT$300 未稅加入購物車Quick View -
加入購物車Quick View
Teensy Arduino Shield Adapter (Teensy擴展板 相容於Arduino) SparkFun原廠
0 滿分 5 分Teensy是一款很簡易開發平臺,您可以將其結合Arduino, Teensy Arduino Shield擴展板提供了這樣的功能
加入購物車Quick View -
Grove Shield 擴展板 for Arduino Nano、Seeeduino Nano seeed原廠
0 滿分 5 分Grove Shield for Arduino Nano 擴展板是為Arduino Nano製作的,也可以與Seeeduino Nano一起使用 。在Grove系統的幫助下,您可以通過簡單的插頭將數百個Grove傳感器,Grove執行器和Grove顯示器連接到Arduino Nano。
NT$190NT$140 未稅加入購物車Quick View -
加入購物車Quick View
XIAO擴展板 Grove Shield轉接板 電源充電板 隨插即用 seeed原廠
0 滿分 5 分加入購物車Quick View -
Grove Base Shield for NodeMCU 擴展板 seeed原廠
0 滿分 5 分NT$305NT$240 未稅加入購物車Quick View -
Gravity: Bluno Beetle Shield Beetle BLE 多功能擴展板 DFRobot原廠
0 滿分 5 分只要按照說明,將Bluno Beetle焊接在上面,你就可以直插3pin的傳感器和其他擴展設備。另外,擴展板還具備外接電源接口,可直接外接供電。
NT$333NT$260 未稅加入購物車Quick View -
weather:bit 氣象偵測擴充板 SparkFun原廠
0 滿分 5 分Weather:bit 擴充板,與micro:bit 結合使用時可為您提供功能齊全的氣象站。
NT$838NT$560 未稅加入購物車Quick View