Big Easy Driver 2A 大功率轉譯型步進馬達驅動板 SparkFun原廠
NT$680 未稅
尚有庫存
- 商品說明
商品說明
Big Easy Driver 2A 大功率轉譯型步進馬達驅動板
Big Easy Driver 2A 大功率轉譯型步進馬達驅動板可以驅動雙相步進電機每相最多2A。它是一個斬波器微步進驅動器,默認為16步微步進模式。它可以承受大約30V的最大電機驅動電壓,並且包括板上5V / 3.3V調節,因此只需要一個電源。儘管在1.4-1.7A /相工作的情況下,該電路板應能夠運行大多數係統,而不需要主動冷卻,但對於接近2A /相的負載,需要加裝散熱片。
特徵
- 雙極微步驅動器
- 2A / Phase Max
- 1.4-1.7A /Phase w/o Heatsink(沒有散熱片)
- 最大電機驅動電壓:30V
- 板載5V / 3.3V調節
Documents
=========================================================
Big Easy Driver
The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on the Allegro A4988 stepper driver chip. It’s the next version of the popular Easy Driver board.
Each Big Easy Driver can drive up to a max of 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 30V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling while operating at 1.4-1.7A/phase, a heatsink is required for loads approaching 2A/phase. You can find the recommended heatsink in the related items below.
Features
- Bi-polar Microstepping Driver
- 2A/Phase Max
- 1.4-1.7A/Phase w/o Heatsink
- Max Motor Drive Voltage: 30V
- On-board 5V/3.3V Regulation
Documents
相關商品
-
加入購物車Quick View
DC 3V-6V 塑膠 直流減速馬達 減速比1:48
0 滿分 5 分單軸、雙軸 兩種規格可供選擇
加入購物車Quick View -
GA12-N20 微型金屬減速馬達
0 滿分 5 分GA12-N20 微型金屬減速馬達 全金屬齒輪 體積小、扭力大、全金屬齒輪,耐用不易磨損!
可順逆/正反轉具有自鎖功能噪音小扭矩大. 電機精小,用處大,做用廣.是開發者的首選。N20 金屬馬達體積小,扭力大,電流小,減速比越大,電機運行越靜音。12 MM 直流減速馬達可用 PWM 控速。
NT$167NT$124 未稅加入購物車Quick View -
L298N 四路直流步進電機驅動模組 四路電機驅動供電一體
0 滿分 5 分L298N電機驅動模組這是集成2塊L298N晶片,同時可以驅動4個直流電機,實現正反轉及電機速度的控制。
模組內部帶有LM2596S降壓晶片,如果驅動7V電壓以上的電機時,可以向外輸出5V電源,供電給控制端使用。
NT$429NT$300 未稅加入購物車Quick View -
L9110S 雙通道直流電機驅動模組 , 兩路步進電機驅動板
0 滿分 5 分L9110S 雙通道直流電機驅動模組 , 兩路步進電機驅動板
L9110S 直流電機驅動板, 板載2個L9110S馬達控制晶片, 模組可以同時驅動2個直流電機或1個4線2相式步進電機, 模組輸入電壓:2.5-12V , 每通道具有800mA連續電流輸出能力
NT$52NT$40 未稅加入購物車Quick View -
加入購物車Quick View
微型振動馬達鈕扣型 扁平微型震動小馬達
0 滿分 5 分加入購物車Quick View -
原廠 PCA9685 16路舵機控制擴展板 16路12-bit PWM控制板
0 滿分 5 分PCA9685是一款16路舵機驅動模組, 出貨時已經焊接好,無須再自行焊接。
PCA9685是一款16路舵機控制擴展板,此驅動板最多可級聯62個驅動板,總共可以驅動992個舵機,實現多自由度機械臂,六足機器人,多軸控制等應用。當你的在一個專案中,碰到了微控制晶片的PWM輸出引腳不夠用的情況,那麼這款PCA9685 16路舵機就能很快幫你解決這個問題了!只要你的主控晶片具備了I2C通信,就能夠讓主控晶片和PCA9685通信,實現多個 舵機的同時控制了。PCA9685 16路舵機控制晶片採用i2c通信,內置了PWM驅動器和一個時鐘。這和TLC5940系列有很大不同。你不需要不斷發送信號而佔用你的單片機!
NT$619NT$286 未稅加入購物車Quick View -
加入購物車Quick View
Monster Moto Shield VNH2SP30 雙路步進電機驅動模組 30A 大電流
0 滿分 5 分Monster Moto Shield VNH2SP30 雙路步進電機驅動模組 30A 大電流
30A 全橋式大功率設計,可控制2組馬達,可堆疊於 Arduino 板上。附 Arduino 範例程式。此款可堆疊式大功率馬達驅動板, 專為Arduino玩家控制大功率馬達而設計的. 可用於機器人及悍馬級電動車等各種應用!全橋驅動,超大電流,強勁驅動,剎車! 採用高性能MOSFET 專用晶片, 在額定電流輸出情況下, 只輕微發熱,無需額外添加散熱器。推薦直接用烙鐵焊接馬達輸出引線,可增大馬達的性能發揮!
加入購物車Quick View -
SG90 舵機 9克伺服機 伺服馬達 1.5Kg扭力 品質穩定
0 滿分 5 分180度
NT$95NT$57 未稅加入購物車Quick View -
Adafruit DRV2605L Haptic Motor Controller 控制器 (用於蜂鳴器或震動馬達)
0 滿分 5 分DRV2605L Haptic Motor Controller
The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors – buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, ‘click’ effects, different buzzer levels, or even having the vibration follow a musical/audio input.
NT$362NT$340 未稅加入購物車Quick View -
L293D 馬達驅動擴展板/Motor Control Shield for Arduino
0 滿分 5 分L293D 馬達驅動擴展板 /Motor Control Shield for Arduino
Arduino 是一款很好的電子製作入門,有了馬達擴展板可以很好的成為機器人開發平臺。這裏介紹一款能驅動各種簡單到稍複雜項目的全功能的馬達擴展板。這是一款常用的直流馬達驅動模組,採用L293D晶片小電流直流馬達驅動晶片。管腳被做成了Arduino相容的,也方便了愛好者快速的基於Arduino的開發。
NT$229NT$114 未稅加入購物車Quick View