- 商品說明
商品說明
ATX Power Connector Breakout Kit 電源連接器分線套件 – 12V/5V (4-pin)
您是否需要通過一個電源為12V和5V的項目供電? ATX電源連接器 突破了12V和5V設備的標準4針計算機外圍設備端口!一旦選擇了電源(無論是ATX電源還是隨附的12V / 5V壁式適配器),就可以為您的項目增光添彩!該套件包含將ATX接線盒和螺釘端子焊接在一起所需的一切,以直接為您的項目供電或將功率注入麵包板。
ATX電源通常具有許多電源連接器,可用於為台式計算機的組件供電。這些連接器之一是4針電源連接器,用於為12V和5V計算機外圍設備(例如磁盤驅動器)供電。根據電源製造商的不同,每個連接器的數量可能有所不同。如果要通過此連接器輕鬆為項目抓取一些果汁,則需要將分線板連接到此端口。
注意:由於此產品是套件,因此需要組裝和焊接的基本知識。 ATX電源連接器 分接頭未預先組裝。僅5V旁邊的引腳接地。未連接12V旁邊的引腳(NC)。有關更多信息,請參閱設備底部的圖片。隨附了交流電線,並通過2針式插頭與100-240VAC輸入配合使用
出貨清單
- SparkFun ATX電源連接器分線板 x1
- ATX直角連接器-PTH 4針 x1
- 2針螺絲端子-5mm間距 x2
- 電源-12V / 5V x1
Documents
=========================================================
SparkFun ATX Power Connector Breakout Kit – 12V/5V (4-pin)
Do you need to power a project with 12V and 5V from one power supply? The ATX power connector breaks out the standard 4-pin computer peripheral port for your 12V and 5V devices! Once you have chosen a power supply (whether it be an ATX power supply or the included 12V/5V wall adapter), you’re ready to give your project some life! This kit has everything you need to solder together an ATX breakout and screw terminals for powering your project directly or pumping power into a breadboard.
ATX power supplies usually have a number of power connectors available to power components for a desktop computer. One of these connectors is the 4-pin power connector, which is intended to power 12V and 5V computer peripherals (such as disk drives). Depending on the manufacturer of the power supply, the quantity of each connector can vary. If you want to easily grab some juice for your project from this connector, you’ll need to connect the breakout board to this port.
Note: Since this product is a kit, assembly and a basic knowledge of soldering will be required. The ATX power connector breakout does not come pre-assembled. Only the pin next to 5V is grounded. The pin next to 12V is not connected (NC). Please refer to the picture of the bottom of the unit for more information. The AC cable for this is included and works with 100-240VAC inputs via a 2-prong style plug.
Includes
- 1x SparkFun ATX Power Connector Breakout Board
- 1x ATX Right Angle Connector – PTH 4-pin
- 2x 2-Pin Screw Terminals – 5mm Pitch
- 1x Power Supply – 12V/5V
Documents
- Schematic
- Eagle Files
- Board Dimensions
- Power Supply Datasheet
- Assembly & Hookup Guide
- GitHub Hardware Repo
相關商品
-
DC電源轉接板 直流電源模組 紅板
0 滿分 5 分直流電源模組 DC 電源模組 DC 電源轉接板
- 名稱:直流電源轉接板
- 尺寸:2.8cm*1.3cm
- 適用接頭:5.5*2.1mm
- 預留2個單排針焊接孔,直接安裝在洞洞板上,方便測試
- 電源輸出接口:2路VCC,2路GND
NT$52NT$29 未稅加入購物車Quick View -
新款PL2303TA USB轉串口模组傳輸線 USB轉 TTL/RS232 支持WIN7
0 滿分 5 分注意!WIN8/WIN10 不支援!
NT$190NT$80 未稅加入購物車Quick View -
最新版KWS-MX19 USB電壓電流檢測器 最高檢測電壓30V 電流5A USB3.0(黑色)
0 滿分 5 分NT$219NT$200 未稅加入購物車Quick View -
加入購物車Quick View
SYB-500 組合型大麵包板 多功能實驗板 優質麵包板 萬能洞洞板 彩條線路板 電路板
0 滿分 5 分加入購物車Quick View -
Arduino 實驗通用零件包
0 滿分 5 分Arduino 實驗通用零件包
有了這款配置好的元件包之後,玩arduino 基本上就不需要再去買什麼零星的電子物料了
NT$143NT$100 未稅加入購物車Quick View -
MB-102 麵包板 830孔 多功能實驗板 萬能洞洞板 彩條線路板 電路板
0 滿分 5 分MB-102 優質麵包板 線路板 麵包板 實驗板 萬能板 165×55×10mm
• 一個端子條:630個插孔
• 兩個分配條:200個插孔
• 產品尺寸:5.6×16.5×0.85(cm)
• 磷青銅鍍鎳彈簧夾
• 匹配跳線,線徑0.8mm
• 塑件:ABS
• 用途:實驗、測試
• 特點:可循環使用,環保回收
結構顏色清晰,易於使用
麵包板可按固定單位拼裝NT$76NT$60 未稅加入購物車Quick View -
加入購物車Quick View
樹莓派 外殼 Raspberry Pi 2,3 代 工控專用 ABS 透明機殼 GPIO 保護盒子 (可壁掛)
0 滿分 5 分出貨產品不含圖片裡的樹梅派開發板 !
此產品為專為樹莓派 3B與 3B+ 量身打造的一款極度實用的保護外殼,物超所值,操作簡單。產品為透明ABS塑料材質,完善的安裝孔和接口使該外殼即能保護裡面的板子,又能夠充分開發所有端 口。使用時請參看我們的說明,來固定樹莓派,並且安裝矽膠墊。
加入購物車Quick View -
加入購物車Quick View
HDMI視訊線 HDMI to Mini HDMI 傳輸線 高清1080P 長1.5M
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
PCB 玻璃纖維電路板 萬用板 洞洞板 雙面噴錫板 5×7,7×9,9×15三種尺寸可選
0 滿分 5 分加入購物車Quick View -
9V 電池扣 轉 DC 電源插頭 / 9V 電池連接線 for Arduino
0 滿分 5 分Arduino互動媒體、 32路舵機控制器必備器材,DC插頭內正外負。
9V 電池連接線 for Arduino
NT$19NT$14 未稅加入購物車Quick View