APDS-9301 環境光感測器模組 直接讀取勒克斯Lux 數值 SparkFun原廠
NT$257 NT$180 未稅
尚有庫存
- 商品說明
商品說明
APDS-9301 環境光感測器模組 直接讀取勒克斯Lux 數值
APDS-9301 環境光感測器 是將光強度轉換為數字輸出信號的I 2 C兼容的光度傳感器板。這種突破是相當簡單的,除了ADPS-9301 IC本身之外,它還專門設計了只有幾個輔助無源器件。所有讀數以 Lux 流明 返回您選定的微處理器,在不同的照明條件下提供精確的照度測量。在每個電路板的頂部,突破了SCL,SDA,3.3V和GND 的標準I 2 C引腳,我們還提供了一個INT引腳,因此APDS-9301可以在某些條件下編程為產生中斷。重要的是要注意,這個突破是非瞬時的,所以需要一些積分時間進行測量。
商品規格
- 典型工作電壓:3.0V
- 最大工作電壓:3.6V
- 16位數字輸出,I 2 C快速模式,400kHz
- 可編程模擬增益和積分時間
- 50/60-Hz照明紋波抑制
- 可編程中斷引腳和功能
- I 2 C上拉電阻器
Documents
=========================================================
SparkFun Ambient Light Sensor Breakout – APDS-9301
The APDS-9301 Ambient Light Sensor Breakout is an I2C-compatible luminosity sensor board that converts light intensity to a digital output signal. This breakout is fairly simple and has been specifically designed with only a few ancillary passive components in addition to the APDS-9301 IC itself. All readings are returned to your chosen microprocessor in lux, providing precise Illuminance measurement under diverse lighting conditions.
On top of each board breaking out our standard I2C pin-out of SCL, SDA, 3.3V and GND, we’ve also provided an INT pin so the APDS-9301 can be programmed to generate an interrupt under certain conditions. It is important to note that this breakout is non-instantaneous, so it will require some integration time to take a measurement.
Features
- Typical Operating Voltage: 3.0V
- Maximum Operating Voltage: 3.6V
- 16-Bit Digital Output with I2C Fast-Mode at 400kHz
- Programmable Analog Gain and Integration Time
- 50/60-Hz Lighting Ripple Rejection
- Programmable Interrupt Pin and Function
- I2C Pull-up Resistors
相關商品
-
2串 7.4V 聚合物鋰電池組保護板 大電流2串保護板
0 滿分 5 分NT$76NT$57 未稅加入購物車Quick View -
Grove – I2C Touch Sensor 電容式觸摸感測器 I2C 觸摸開關感應器 seeed原廠
0 滿分 5 分I2C 觸摸感測器使用飛思卡爾MPR121晶片,它可以感應觸碰和人的手指的接近。這個感應器包括兩部分——一個觸碰感應控制器和4個感應片。把感應片插到控制器上,就可以開始使用了。
NT$819NT$400 未稅加入購物車Quick View -
加入購物車Quick View
Gravity: I2C 非接觸式紅外線溫度感測器 MLX90614 for Arduino DFRobot原廠
0 滿分 5 分加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Multichannel Gas Sensor v2 多通道有害氣體感測器 seeed原廠
0 滿分 5 分加入購物車Quick View -
Grove – Gas Sensor(MQ5) 氣體感測器 Seeed原廠
0 滿分 5 分可檢測液化石油氣,天然氣,城鎮煤氣等。基於其快速響應時間,測量可以盡快進行。且其靈敏度也可以通過電位器來進行調節。
NT$276NT$220 未稅加入購物車Quick View -
Analog pH Meter Pro Sensor 模擬檢測 PH值(專業版) 相容Arduino DFRobot原廠
0 滿分 5 分NT$2,667NT$2,460 未稅加入購物車Quick View -
加入購物車Quick View
MAX471 電壓檢測 電流檢測模組 電壓感測器 電流感測器
0 滿分 5 分電流檢測採用美國美信公司生產的精密高端電流檢測放大器晶片MAX471
加入購物車Quick View -
FlexiForce 壓力感測器 – 1磅 SparkFun原廠
0 滿分 5 分
NT$781NT$740 未稅加入購物車Quick View -
加入購物車Quick View
TXB0104 電壓位準 I/O轉換板 4bit SparkFun原廠
0 滿分 5 分Texas Instruments TXB0104 模組的擴展板。TXB0104是一款具有自動方向感應功能的4位雙向電壓電平轉換器。這個4位非反相轉換器使用兩個獨立的可配置電源軌。A端口旨在跟踪VCCA。VCCA接受1.2V至3.6V的任何電源電壓。B端口用於跟踪VCCB。VCCB接受1.65V至5.5V的任何電源電壓。這允許在1.2V,1.5V,1.8V,2.5V,3.3V和5V電壓節點之間進行通用的低壓雙向轉換。VCCA不應超過VCCB。我們已經打破了這個模塊上的每個引腳,您可以輕鬆訪問A和B端口。
加入購物車Quick View