Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
NT$171 NT$143 未稅
Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
尚有庫存
- 商品說明
商品說明
Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
EasyDriver Stepper Motor Driver 步進馬達驅動板可以直接控制 7~30VDC 雙極性步進馬達(bipolar stepping motor) 。步進馬達每一動作可設定為全步、1/2步、1/4步或1/8步模式, 達到精確快速的馬達控制。本步進馬達驅動板使用非常簡易。驅動板接收5V或 3.3V脈衝驅動信號(3.3V 請短路SJ2 ), 每一個脈衝, 跳一動作 (全步、1/2、1/4或1/8步)。另一高/低電平信號控制步進馬達正反轉。注意:驅動器通電時,請勿連接或斷開馬達。這將導致A3967晶片永久性損壞。
參數
- A3967 步進馬達驅動晶片
- MS1 and MS2 腳用於控制馬達的細分(1/2、1/4、1/8),默認為1/8細分。
- 兼容4, 6, 及8線等, 雙極性步進馬達。
- 可調電流控制, ±750 mA
- 電源輸入範圍7-30V,電壓越高,高速時扭矩越高
焊接腳位的方式可用 90度彎角排針方式如下,或直插麵包板模式
Easy Driver Shield Stepper Motor Driver V44 A3967
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth). Compatible with 4, 6, and 8 wire stepper motors of any voltage.
Adjustable current control from 150mA/phase to 750mA/phase. Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds.
技術資料
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (A3967)
- EasyDriver Website
- Example Arduino Tutorial in Portuguese
- GitHub
相關商品
-
DC 3V-6V 直流減速馬達 TT馬達 減速比1:48 +小車輪胎 雙軸馬達含馬達固定架
0 滿分 5 分DC 3V-6V 塑膠直流減速馬達 TT馬達 雙軸 減速比1:48 +智能小車輪胎 馬達
岀貨清單: 1個直流減速電機雙軸+1個輪子+TT 馬達固定架=1套
NT$143NT$114 未稅加入購物車Quick View -
四驅 4WD 四輪智慧小車底盤 / 自走車/ 機器人 底盤開發套件組
0 滿分 5 分NT$724NT$460 未稅加入購物車Quick View -
MG996R 55G 90度-180度 金屬齒輪伺服器 舵機
0 滿分 5 分MG996R 90-180度 金屬齒輪伺服器 舵機 ,數位式 11 KG大扭力舵機/伺服馬達
脈寬信號 500-1500-2500,對應的角度是-90度~+90度
最新大扭力舵機MG996R (MG995升級產品)6v/11Kg ,原MG995的升級產品,是目前市場上較具性價比大扭力舵機之一
NT$305NT$257 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Voltage Divider 電阻分壓器 seeed原廠
0 滿分 5 分加入購物車Quick View -
L298N 四路直流步進電機驅動模組 四路電機驅動供電一體
0 滿分 5 分L298N電機驅動模組這是集成2塊L298N晶片,同時可以驅動4個直流電機,實現正反轉及電機速度的控制。
模組內部帶有LM2596S降壓晶片,如果驅動7V電壓以上的電機時,可以向外輸出5V電源,供電給控制端使用。
NT$429NT$300 未稅加入購物車Quick View -
3V-6V 方形微型 直流馬達
0 滿分 5 分3V-6V 方形微型直流馬達 直流玩具馬達,微型小電機
- 【長度】25mm
- 【直徑】21mm
- 【軸徑】2mm
- 【軸長】9mm
- 【電壓】3-6V
NT$29NT$24 未稅加入購物車Quick View -
L9110S 雙通道直流電機驅動模組 , 兩路步進電機驅動板
0 滿分 5 分L9110S 雙通道直流電機驅動模組 , 兩路步進電機驅動板
L9110S 直流電機驅動板, 板載2個L9110S馬達控制晶片, 模組可以同時驅動2個直流電機或1個4線2相式步進電機, 模組輸入電壓:2.5-12V , 每通道具有800mA連續電流輸出能力
NT$52NT$40 未稅加入購物車Quick View -
加入購物車Quick View
Monster Moto Shield VNH2SP30 雙路步進電機驅動模組 30A 大電流
0 滿分 5 分Monster Moto Shield VNH2SP30 雙路步進電機驅動模組 30A 大電流
30A 全橋式大功率設計,可控制2組馬達,可堆疊於 Arduino 板上。附 Arduino 範例程式。此款可堆疊式大功率馬達驅動板, 專為Arduino玩家控制大功率馬達而設計的. 可用於機器人及悍馬級電動車等各種應用!全橋驅動,超大電流,強勁驅動,剎車! 採用高性能MOSFET 專用晶片, 在額定電流輸出情況下, 只輕微發熱,無需額外添加散熱器。推薦直接用烙鐵焊接馬達輸出引線,可增大馬達的性能發揮!
加入購物車Quick View -
Adafruit DRV2605L Haptic Motor Controller 控制器 (用於蜂鳴器或震動馬達)
0 滿分 5 分DRV2605L Haptic Motor Controller
The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors – buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, ‘click’ effects, different buzzer levels, or even having the vibration follow a musical/audio input.
NT$362NT$340 未稅加入購物車Quick View -
TB6612FNG Dual Motor Driver 超小設計雙馬達驅動板 CJMCU
0 滿分 5 分TB6612FNG Dual Motor Driver 超小設計雙馬達驅動板 CJMCU
TB6612FNG電機驅動模塊小體積高性能超L298N 自平衡小車3PI配套. 該模塊相對於傳統的L298N效率上提高很多,體積上也大幅度減少,在額定範圍內,芯片基本不發熱,當然也就顯得更加嬌貴,所以我們建議有一定動手能力的朋友使用,接線的時候務必細心細心再細心,注意正負極性。
NT$214NT$160 未稅加入購物車Quick View