Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
NT$171 NT$143 未稅
Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
尚有庫存
- 商品說明
商品說明
Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
EasyDriver Stepper Motor Driver 步進馬達驅動板可以直接控制 7~30VDC 雙極性步進馬達(bipolar stepping motor) 。步進馬達每一動作可設定為全步、1/2步、1/4步或1/8步模式, 達到精確快速的馬達控制。本步進馬達驅動板使用非常簡易。驅動板接收5V或 3.3V脈衝驅動信號(3.3V 請短路SJ2 ), 每一個脈衝, 跳一動作 (全步、1/2、1/4或1/8步)。另一高/低電平信號控制步進馬達正反轉。注意:驅動器通電時,請勿連接或斷開馬達。這將導致A3967晶片永久性損壞。
參數
- A3967 步進馬達驅動晶片
- MS1 and MS2 腳用於控制馬達的細分(1/2、1/4、1/8),默認為1/8細分。
- 兼容4, 6, 及8線等, 雙極性步進馬達。
- 可調電流控制, ±750 mA
- 電源輸入範圍7-30V,電壓越高,高速時扭矩越高
焊接腳位的方式可用 90度彎角排針方式如下,或直插麵包板模式
Easy Driver Shield Stepper Motor Driver V44 A3967
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth). Compatible with 4, 6, and 8 wire stepper motors of any voltage.
Adjustable current control from 150mA/phase to 750mA/phase. Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds.
技術資料
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (A3967)
- EasyDriver Website
- Example Arduino Tutorial in Portuguese
- GitHub
相關商品
-
機器手臂 專用 交換式電源 25W 5V5A 可同時供應多個舵機
0 滿分 5 分機器手臂專用交換式電源 25W 5V5A 可同時供應多個舵機
提供六軸機械手臂,六顆伺服馬達電源。
使用 105℃ 長壽電解電容, 可操作於環溫 70℃
抗 300VAC 輸入電壓突波, 高達 5 秒之能力
35 – 150W 均通過 EN61000-6-2 重工業 EMS 標準
Protections : Short circuit / OLP / OVP
100% full load burn-in testNT$333NT$280 未稅加入購物車Quick View -
MG996R 55G 360度 金屬齒輪伺服器 舵機
0 滿分 5 分MG996R 360度 金屬齒輪伺服器 舵機 ,數位式 11 KG大扭力舵機/伺服馬達
最新大扭力舵機MG996R (MG995升級產品)6v/11Kg , 原MG995的升級產品,是目前市場上較具性價比大扭力舵機之一
NT$305NT$257 未稅加入購物車Quick View -
MG995 金屬銅齒輪 55G 舵機 360度
0 滿分 5 分MG995/雙足機器人/機械手/遙控車/55G金屬銅齒輪舵機, 產品型號 MG995 產品尺寸 40.7*19.7*42.9mm 產品重量 55g, 工作扭矩 13KG/cm 反應轉速 53-62R/M 使用溫度 -30~+60°
適用範圍 1:10和1:8平跑車、越野車、卡車、大腳車、攀爬車、雙足機器人、機械手、遙控船,適合50級-90級甲醇固定翼飛機以及26cc-50cc汽油固定翼飛機等模型。NT$190NT$160 未稅加入購物車Quick View -
加入購物車Quick View
DC 3V-6V 塑膠 直流減速馬達 減速比1:48
0 滿分 5 分單軸、雙軸 兩種規格可供選擇
加入購物車Quick View -
加入購物車Quick View
Grove – Voltage Divider 電阻分壓器 seeed原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
微型振動馬達鈕扣型 扁平微型震動小馬達
0 滿分 5 分加入購物車Quick View -
DC 3V-6V 直流減速馬達 TT馬達 減速比1:48 +小車輪胎 雙軸馬達含馬達固定架
0 滿分 5 分DC 3V-6V 塑膠直流減速馬達 TT馬達 雙軸 減速比1:48 +智能小車輪胎 馬達
岀貨清單: 1個直流減速電機雙軸+1個輪子+TT 馬達固定架=1套
NT$143NT$114 未稅加入購物車Quick View -
Grove – Vibration Motor 振動馬達 直流馬達模組 seeed原廠
0 滿分 5 分這是一款無聲的迷你震動馬達模組。當輸入高電平時,電機會像手機在靜音模式一樣振動。支援 Arduino 與 Raspberry Pi
NT$114NT$100 未稅加入購物車Quick View -
Adafruit DRV2605L Haptic Motor Controller 控制器 (用於蜂鳴器或震動馬達)
0 滿分 5 分DRV2605L Haptic Motor Controller
The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors – buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, ‘click’ effects, different buzzer levels, or even having the vibration follow a musical/audio input.
NT$362NT$340 未稅加入購物車Quick View -
2路電機板+16路舵機擴展板 機器人機械臂小車底盤專用擴充板 適用於Arduino
0 滿分 5 分2路電機板+16路舵機擴展板Arudino UNO 機器人機械臂小車底盤
2 Motor && 16 Servo Drive Shield是兼容Arduino UNO和ESPduino的一款電機和舵機驅動模塊。模塊採用疊插式線路板設計,可以直接接入Arduino UNO 或者ESPduino線路板。該產品可以同時控制2 路直流電機(4.5 ~36V )和16 路舵機(5 ~18V ),適合於裝有機械臂的移動機器人驅動控制。
NT$619NT$500 未稅加入購物車Quick View