Adafruit RFM96W LoRa Radio Transceiver Breakout – 433MHz 含 SMA天線接頭
NT$952 NT$880 未稅
+20dBm的LoRa分組無線電,但可以進一步延伸。他們可以使用簡單的有線天線輕鬆地走2 Km視線,或者使用定向天線和設置調整可達20Km
- 分組廣播與即將到來的Arduino圖書館
- 使用免授權的ISM頻段:“歐洲ISM”@ 868MHz或“980MHz的”美國ISM“
- 為uFL或SMA無線電連接器使用簡單的有線天線或現場
- SX1276基於LoRa®的帶SPI接口的模塊
- +5至+20 dBm至100 mW功率輸出能力(軟件可選擇功率輸出)
- + 20dBm傳輸期間〜100mA峰值,有源收音期間〜30mA。
- 範圍約 2Km,取決於障礙物,頻率,天線和功率輸出
尚有庫存
- 商品說明
商品說明
Adafruit RFM96W LoRa Radio Transceiver Breakout – 433 MHz 雙頻無線傳輸模組 含 Edge-Launch SMA Connector 天線接頭
雙頻無線傳輸模組 :+20dBm的LoRa分組無線電,但可以進一步延伸。他們可以使用簡單的有線天線輕鬆地走2 Km視線,或者使用定向天線和設置調整可達20Km
- 分組廣播與即將到來的Arduino圖書館
- 使用免授權的ISM頻段:“歐洲ISM”&”美國ISM“
- 為uFL或SMA無線電連接器使用簡單的有線天線或現場
- SX1276基於LoRa®的帶SPI接口的模塊
- +5至+20 dBm至100 mW功率輸出能力(軟件可選擇功率輸出)
- + 20dBm傳輸期間〜100mA峰值,有源收音期間〜30mA。
- 範圍約 2Km,取決於障礙物,頻率,天線和功率輸出
433 MHz 雙頻無線傳輸模組 原廠技術導覽:
https://learn.adafruit.com/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts
“You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat.”
Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren’t so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can’t send data as fast but you can send data a lot farther.’
Also, these packet radios are simpler than WiFi or BLE, you dont have to associate, pair, scan, or worry about connections. All you do is send data whenever you like, and any other modules tuned to that same frequency (and, with the same encryption key) will receive. The receiver can then send a reply back. The modules do packetization, error correction and can also auto-retransmit so its not like you have worry about everything but less power is wasted on maintaining a link or pairing.
These modules are great for use with Arduinos or other microcontrollers, say if you want a sensor node nework or transmit data over a campus or town. The trade off is you need two or more radios, with matching frequencies. WiFi and BT, on the other hand, are commonly included in computers and phones.
These radio modules come in four variants (two modulation types and two frequencies) The RFM69’s are easiest to work with, and are well known and understood. The LoRa radios are exciting and more powerful but also more expensive.
This is the LoRa radio module 433 MHz version!
We also carry a 900 MHz version here. These are +20dBm LoRa packet radios that have a special radio modulation that is not compatible with the RFM69s but can go much much farther. They can easily go 2 Km line of sight using simple wire antennas, or up to 20Km with directional antennas and settings tweakings
- Packet radio with ready-to-go Arduino libraries
- Uses the amateur or license-free ISM band (ITU “Europe” license-free ISM or ITU “American” amateur with limitations)
- Use a simple wire antenna or spot for uFL or SMA radio connector
- SX1276 LoRa® based module with SPI interface
- +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
- ~100mA peak during +20dBm transmit, ~30mA during active radio listening.
- Range of approx. 2Km, depending on obstructions, frequency, antenna and power output
All radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433 MHz, etc.
Each radio comes with some header, a 3.3V voltage regulator and levelshifter that can handle 3-5V DC power and logic so you can use it with 3V or 5V devices. Some soldering is required to attach the header. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally you can pick up a uFL or SMA edge-mount connector and attach an external duck.
雙頻無線傳輸模組
相關商品
-
Grove – NFC Tag 近場通訊標籤模組 seeed原廠
0 滿分 5 分Grove – NFC Tag 是一款基於意法半導體M24LR64E-R集成解決方案的近場標籤模塊。通過I2C接口與主機通信,內建64位唯一識別碼同時集成了64Kbit EEPROM。模塊外擴了一個PCB天線,可以很方便安裝到您設計的結構中。
NT$848NT$700 未稅加入購物車Quick View -
Dragino LoRa 擴展板- 433M frequency 相容Arduino seeed原廠
0 滿分 5 分Dragino LoRa 433M frequency Arduino專用 Lora 擴展版
Dragino LORA擴展板 是一個專門為 Arduino 所設計的 Lora 功能 擴展板 , Lora 擴展板基於開放源碼庫,允許用戶發送數據,達到極長的範圍在低 data-rates.it 提供超遠距離擴頻通信和高抗干擾性的同時儘量減少電流消耗。
NT$1,133NT$860 未稅加入購物車Quick View -
HC-11 433 轉串口 C1101 模組低功耗單片機開發遠距離模組
0 滿分 5 分HC-11 433 轉串口 C1101 模組低功耗單片機開發遠距離模組
NT$219NT$190 未稅加入購物車Quick View -
加入購物車Quick View
HC-05 串口藍牙模組 (帶底板) 主機/從機可設定 / 帶底板,附 Arduino 範例
0 滿分 5 分請勿將電源接到信號腳上,會直接燒壞模組!
藍牙透傳模組只有4個AT指令,分別是測試通訊,改名稱,改串列傳輸速率,改配對密碼,AT指令必須從TXD,RXD信號腳設置,不能通過藍牙通道設置。發送AT指令的設備可以是各種類型的MCU(比如51,avr,pic,msp430,arm等),也可以是電腦通過串口(PC串口接MAX232以後或者USB轉串口)發送。
加入購物車Quick View -
XBee Explorer Dongle sparkfun 原廠
0 滿分 5 分This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.
NT$933NT$848 未稅加入購物車Quick View -
433 868 915MHz Ultra low power data radio module 低功耗無線數據傳輸模組 內附天線
0 滿分 5 分低功耗無線數據傳輸模組內附天線
加入購物車Quick View -
HX1838 紅外線接收遙控模組 紅外接收模組
0 滿分 5 分HX1838遙控模組 紅外接收模組
- 感測器採用HX1838,靈敏度高
- 工作電壓5V
- 輸出形式:數位量輸出
- 設有固定螺栓孔,方便安裝
- 小板PCB尺寸:1.9cm * 1.4cm
- 電源指示燈(紅色)
NT$85NT$38 未稅加入購物車Quick View -
Grove – Infrared Receiver 紅外接收模組 seeed原廠
0 滿分 5 分NT$180NT$140 未稅加入購物車Quick View -
HC-06 藍芽轉 UART 從機藍芽模組 具底板,提供Arduino 範例
0 滿分 5 分請勿將電源接到信號腳上,會直接燒壞模組!
兼容版跟原裝版的功能操作方法都相同!
加入購物車Quick View -
Grove – NFC 近場通訊模組 seeed原廠
0 滿分 5 分Grove – NFC 近場通訊是指短距離的無線通訊技術,應用的場合包括門禁管理系統和移動支付系統。近場通訊模塊集成了PN532收發芯片,在13.56MHz下無需接觸即可通訊,支持讀寫工作在13.56MHz的標籤,或者兩個近場通訊模塊可以完成點對點通信。近場通訊模塊配有的通訊接口包括I2C和UART,UART為默認的通訊方式。另外,模塊的天線引出的設計,無論你使用哪種盒子,都能方便地引出天線,給其他的設計騰出空間。
NT$762NT$680 未稅加入購物車Quick View