Adafruit RFM96W LoRa Radio Transceiver Breakout – 433MHz 含 SMA天線接頭
NT$952 NT$880 未稅
+20dBm的LoRa分組無線電,但可以進一步延伸。他們可以使用簡單的有線天線輕鬆地走2 Km視線,或者使用定向天線和設置調整可達20Km
- 分組廣播與即將到來的Arduino圖書館
- 使用免授權的ISM頻段:“歐洲ISM”@ 868MHz或“980MHz的”美國ISM“
- 為uFL或SMA無線電連接器使用簡單的有線天線或現場
- SX1276基於LoRa®的帶SPI接口的模塊
- +5至+20 dBm至100 mW功率輸出能力(軟件可選擇功率輸出)
- + 20dBm傳輸期間〜100mA峰值,有源收音期間〜30mA。
- 範圍約 2Km,取決於障礙物,頻率,天線和功率輸出
尚有庫存
- 商品說明
商品說明
Adafruit RFM96W LoRa Radio Transceiver Breakout – 433 MHz 雙頻無線傳輸模組 含 Edge-Launch SMA Connector 天線接頭
雙頻無線傳輸模組 :+20dBm的LoRa分組無線電,但可以進一步延伸。他們可以使用簡單的有線天線輕鬆地走2 Km視線,或者使用定向天線和設置調整可達20Km
- 分組廣播與即將到來的Arduino圖書館
- 使用免授權的ISM頻段:“歐洲ISM”&”美國ISM“
- 為uFL或SMA無線電連接器使用簡單的有線天線或現場
- SX1276基於LoRa®的帶SPI接口的模塊
- +5至+20 dBm至100 mW功率輸出能力(軟件可選擇功率輸出)
- + 20dBm傳輸期間〜100mA峰值,有源收音期間〜30mA。
- 範圍約 2Km,取決於障礙物,頻率,天線和功率輸出
433 MHz 雙頻無線傳輸模組 原廠技術導覽:
https://learn.adafruit.com/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts
“You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat.”
Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren’t so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can’t send data as fast but you can send data a lot farther.’
Also, these packet radios are simpler than WiFi or BLE, you dont have to associate, pair, scan, or worry about connections. All you do is send data whenever you like, and any other modules tuned to that same frequency (and, with the same encryption key) will receive. The receiver can then send a reply back. The modules do packetization, error correction and can also auto-retransmit so its not like you have worry about everything but less power is wasted on maintaining a link or pairing.
These modules are great for use with Arduinos or other microcontrollers, say if you want a sensor node nework or transmit data over a campus or town. The trade off is you need two or more radios, with matching frequencies. WiFi and BT, on the other hand, are commonly included in computers and phones.
These radio modules come in four variants (two modulation types and two frequencies) The RFM69’s are easiest to work with, and are well known and understood. The LoRa radios are exciting and more powerful but also more expensive.
This is the LoRa radio module 433 MHz version!
We also carry a 900 MHz version here. These are +20dBm LoRa packet radios that have a special radio modulation that is not compatible with the RFM69s but can go much much farther. They can easily go 2 Km line of sight using simple wire antennas, or up to 20Km with directional antennas and settings tweakings
- Packet radio with ready-to-go Arduino libraries
- Uses the amateur or license-free ISM band (ITU “Europe” license-free ISM or ITU “American” amateur with limitations)
- Use a simple wire antenna or spot for uFL or SMA radio connector
- SX1276 LoRa® based module with SPI interface
- +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
- ~100mA peak during +20dBm transmit, ~30mA during active radio listening.
- Range of approx. 2Km, depending on obstructions, frequency, antenna and power output
All radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433 MHz, etc.
Each radio comes with some header, a 3.3V voltage regulator and levelshifter that can handle 3-5V DC power and logic so you can use it with 3V or 5V devices. Some soldering is required to attach the header. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally you can pick up a uFL or SMA edge-mount connector and attach an external duck.
雙頻無線傳輸模組
相關商品
-
Dragino LoRa Shield v95- 868M frequency Arduino Lora 擴展板 seeed原廠
0 滿分 5 分Dragino LORA擴展板 是一個專門為 Arduino 所設計的 Lora 功能 擴展板 , Lora 擴展板基於開放源碼庫,允許用戶發送數據,達到極長的範圍在低 data-rates.it 提供超遠距離擴頻通信和高抗干擾性的同時儘量減少電流消耗。
NT$1,133NT$800 未稅加入購物車Quick View -
加入購物車Quick View
HM-10 藍芽 4.0 模組 透明串口 藍牙串口 帶邏輯電平轉換/防反
0 滿分 5 分HM-10 藍芽 4.0 模組支援 iBeacon
當蘋果在今年夏天的「全球開發者大會」(WWDC)上首次提及「iBeacon」這一單詞的時候,他們例舉了上文中利用iBeacon快速購買演出門票的例子。但事實上,有關這一技術的實用領域還遠遠不限於此,因為這一技術的出現使得在室內環境下對使用者進行精確定位變成了可能。透過周邊多個iBeacon收發器,使用者的位置可以被精確定位至幾英尺的範圍內,這一定位技術被業內統稱為「微定位」(microlocation)。
加入購物車Quick View -
加入購物車Quick View
ESP8266 ESP-01S 串口 WIFI 收發無線模組 安信可科技原廠貨
0 滿分 5 分加入購物車Quick View -
Seeed BLE Shield (HM11) 藍牙擴展板 相容 arduino seeeduino
0 滿分 5 分Seeed BLE Shield 是一款低功耗藍牙4.0傳輸模組。模塊採用的是TI CC2540 晶片,配置256Kb空間,支持AT指令。你可以將此模塊應用於遙控、遊戲手柄、數據無線採集、智慧家居等領域。同時作為Shield系列的一員,它能很方便的直插到開發板上使用。
NT$724NT$500 未稅加入購物車Quick View -
HX1838 紅外線接收遙控模組 紅外接收模組
0 滿分 5 分HX1838遙控模組 紅外接收模組
- 感測器採用HX1838,靈敏度高
- 工作電壓5V
- 輸出形式:數位量輸出
- 設有固定螺栓孔,方便安裝
- 小板PCB尺寸:1.9cm * 1.4cm
- 電源指示燈(紅色)
NT$85NT$38 未稅加入購物車Quick View -
HC-12 SI4463 單片機串口模組 433 MHz 遠距離 1000M
0 滿分 5 分HC-12 SI4463 單片機串口模組 433 MHz 遠距離 1000M 替代藍芽更長距離穩定無線傳輸方案
附詳細 Arduino 範例說明與教學, 有完整兩塊 Arduino 透過 HC-12 傳輸資料的範例與說明(英文)與完整技術文件
- 供電電壓3.2V~5.5V。(如果模組要長時間工作在發射狀態,建議當電源電壓超過4.5V時串接一個1N4007二極管,避免模組內置LDO發熱)
- 默認通訊距離(開闊地測試):600m左右(通訊距離最高可調達到1000m,空中波特率5000bps)。
- 默認空閒電流:16MA(模組在不同的工作模式下的工作電流不同)。
- 模組尺寸:27.8mm×14.4mm×4mm。
- 工作頻率範圍(433.4—473.0MHz,多達100個通信頻道)最大100mW 發射功率(可設置)
- 模組支持軟件升級。(我們為客戶提供升級軟件)
- 默認出廠設置:工作模式FU3,波特率9600bps,通訊頻道CH001(433.4M)。
NT$267NT$238 未稅加入購物車Quick View -
420-450MHz Ultra low power data radio module 低功率無線數據傳輸模組
0 滿分 5 分WT-800T是一款高性能,低功耗,遠距離無線數據的微功耗射頻收發模塊,內置自動傳播的計算和序言CRC錯誤校正處理,在不改變用戶的任何數據和協議,採用半雙工透明傳輸機制來實現無線通信功能。模組的射頻芯片是基於擴頻跳頻技術,穩定性,抗干擾能力強和接收靈敏度超出了現有的GFSK模塊。配置的低功耗高速ST處理器,數據處理能力,運算速度都有所提高。
加入購物車Quick View -
Grove – Infrared Receiver 紅外接收模組 seeed原廠
0 滿分 5 分NT$180NT$140 未稅加入購物車Quick View -
433Mhz RF link kit RF 無線接收發射傳輸模組 一對 相容Arduino
0 滿分 5 分RF 433Mhz 模組 發射接收一對
工作電壓(V):DC 5V
傳輸速率:<10KB/S
發射功率:25mW
工作電流:4mA
調製方式:調幅
工作溫度: -10 ℃ ~ 70 ℃
接收靈敏度(dBm):-105DB
工作頻率(MHz):433.92MHz
實測距離可以達40公尺(視實際環境有無干擾而定)NT$57NT$38 未稅加入購物車Quick View -
38KHz 紅外線接收模組
0 滿分 5 分38KHz 紅外線接收模組/數位感測器模組/紅外線接收器 for Arduino 與樹莓派
Arduino 專用模組,端口與感測擴充板相容
38KHz 紅外接收頭,可接受各種紅外遙控信號NT$57NT$48 未稅加入購物車Quick View