Adafruit HUZZAH ESP8266 Breakout
NT$457 NT$440 未稅
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
尚有庫存
- 商品說明
商品說明
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:
- Reset button,
- User button that can also put the chip into bootloading mode,
- Red LED you can blink,
- Level shifting on the UART and reset pin,
- 3.3V out, 500mA regulator (you’ll want to assume the ESP8266 can draw up to 250mA so budget accordingly)
- Two diode-protected power inputs (one for a USB cable, another for a battery)
Two parallel, breadboard-friendly breakouts on either side give you access to:
- 1 x Analog input (1.8V max)
- 9 x GPIO (3.3V logic), which can also be used for I2C or SPI
- 2 x UART pins
- 2 x 3-6V power inputs, reset, enable, LDO-disable, 3.3V output
One breakout at the end has an “FTDI” pinout so you can plug in an FTDI or console cable to upload software and read/write debugging information via the UART. When you’re done with your coding, remove the cable, and this little module can be embeded into your project box.
相關商品
-
NodeMcu 底座擴展板 NodeMcu Lua WIFI 開發板 ESP8266 串口擴展板 For V3 CH340版本
0 滿分 5 分NT$143NT$114 未稅加入購物車Quick View -
ESP8266 ESP-12S WiFi模塊 串口轉WiFi 無線傳輸 工業級 安信可原廠公司貨
0 滿分 5 分NT$143NT$100 未稅加入購物車Quick View -
加入購物車Quick View
FireBeetle Board-ESP8266 WiFi 物聯網開發板 DFRobot原廠
0 滿分 5 分加入購物車Quick View -
WIFI ESP8266 模組轉接板 ESP-07 ESP-08 ESP-12 (不含模組)
0 滿分 5 分NT$48NT$29 未稅加入購物車Quick View -
WEMOS D1 R2 V2.1 開發板 基於ESP8266 WEMOS Electronics 原廠出貨
0 滿分 5 分WEMOS原廠2021年後生產的機板上不再有印刷WEMOS字樣,僅晶片鐵殼保留WeMos印刷字樣。
- 1 piece – Wemos D1 R2 Version 2.1 ESP8266 Development Board
- More than enough straight male header pins to solder into all of the open through-holes on the board
NT$352NT$300 未稅加入購物車Quick View -
加入購物車Quick View
ESP8266 Thing-Dev Board 開發板 (已焊針腳) SparkFun原廠
0 滿分 5 分這是SparkFun ESP8266 Thing開發板 – 一款專門圍繞ESP8266設計的開發板,集成了FTDI USB至串行芯片。
加入購物車Quick View -
加入購物車Quick View
mini D1 wifi NodeMcu Lua WIFI 基於ESP8266 開發板 D1 Mini ESP-12F
0 滿分 5 分加入購物車Quick View -
ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
0 滿分 5 分ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。該Thing是低成本和易於使用,和Arduino IDE集成可以在短短幾個步驟實現。我們通過打開所有模塊的引腳,添加了LiPo充電器,電源和所需的其他所有支持電路,使ESP8266易於使
NT$619NT$560 未稅加入購物車Quick View -
加入購物車Quick View
Wemos D1 Pro mini-16m 基於 ESP-8266EX 的迷你WiFi 開發板
0 滿分 5 分- 1個數字輸入/輸出引腳
- Interrupt 中斷/ PWM / I2C /one-wire
- 1路模擬輸入(3.2V最大輸入)
- 16M bit Flash
- 外部天線連接器
- 內置陶瓷天線
- 新型CP2104 USB-TO-UART IC
加入購物車Quick View -
NodeMcu Lua V3 ESP-12N ESP8266 WiFi物聯網開發板 CP2102
0 滿分 5 分V3開發板有2款版本 一款是用CH340接口晶片 一款是CP2102接口晶片,大小有區別(CH340比較大片),性能一樣
NT$219NT$140 未稅加入購物車Quick View