Adafruit HUZZAH ESP8266 Breakout
NT$457 NT$440 未稅
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
尚有庫存
- 商品說明
商品說明
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:
- Reset button,
- User button that can also put the chip into bootloading mode,
- Red LED you can blink,
- Level shifting on the UART and reset pin,
- 3.3V out, 500mA regulator (you’ll want to assume the ESP8266 can draw up to 250mA so budget accordingly)
- Two diode-protected power inputs (one for a USB cable, another for a battery)
Two parallel, breadboard-friendly breakouts on either side give you access to:
- 1 x Analog input (1.8V max)
- 9 x GPIO (3.3V logic), which can also be used for I2C or SPI
- 2 x UART pins
- 2 x 3-6V power inputs, reset, enable, LDO-disable, 3.3V output
One breakout at the end has an “FTDI” pinout so you can plug in an FTDI or console cable to upload software and read/write debugging information via the UART. When you’re done with your coding, remove the cable, and this little module can be embeded into your project box.
相關商品
-
NodeMcu Lua WIFI V3 物聯網 開發板 ESP8266 wifi模組 接口 CH-340
0 滿分 5 分NT$171NT$100 未稅加入購物車Quick View -
加入購物車Quick View
ESP8266 Thing-Dev Board 開發板 (已焊針腳) SparkFun原廠
0 滿分 5 分這是SparkFun ESP8266 Thing開發板 – 一款專門圍繞ESP8266設計的開發板,集成了FTDI USB至串行芯片。
加入購物車Quick View -
ESPDuino 開發板帶WiFi的 UNO R3 開發板 ESP8266 (ESP-13) 相容Arduino 附傳輸線
0 滿分 5 分ESPDuino 開發板帶WiFi的 UNO R3 開發板 ESP8266 (ESP-13)
ESPDuino = Wifi + Uno
ESPduino 是Doit 基於 ESP8266 ESP-13 開發的UNO 開發板。首款帶WiFi的Uno開發板,完美兼容Arduino UNO R3。利用ESP8266本身自帶WiFi的特性,ESPDuino天生支持WiFi,相對於傳統的Arduino開發,省去了買 WiFi擴 展板的費用,是物聯網開發板的不二之選。
NT$743NT$676 未稅加入購物車Quick View -
Blynk Board – ESP8266 Blynk 開發板 SparkFun原廠
0 滿分 5 分Blynk是一款易於使用的應用程序生成器,它允許用戶將各種按鈕,滑塊,圖形顯示甚至RGB控制器添加到手機中。
NT$1,429NT$1,100 未稅加入購物車Quick View -
加入購物車Quick View
ESP8266 ESP-01S 串口 WIFI 收發無線模組 安信可科技原廠貨
0 滿分 5 分加入購物車Quick View -
LOLIN (WeMos) D1 WiFi Arduino UNO 開發板ESP8266 ESP-12F 直接用 Arduino IDE 開發
0 滿分 5 分WeMos D1 WiFi Arduino UNO 開發板 物聯網應用開發板
- 微控制器:ESP-8266EX
- WIFI頻率:2.4GHz
- IEEE 802.11 b / g / n
- WiFi功率放大器(PA):+25dBm
- 輸入介面:Micro USB
- 工作電壓:3.3V
- 時脈:80 / 160 MHz
- 數位I/O PIN:11支接腳
- 類比輸入PIN:1支接腳
- FLASH:4MB
- DC O2.1mm插孔
- Arduino兼容,使用Arduino IDE來編程,
- 支援OTA無線上傳
- 板載5V 1A開關電源 (最高輸入電壓24V)
- 安裝後,直接用Arduino IDE 開發,跟Arduino UNO 一樣操作
NT$286NT$200 未稅加入購物車Quick View -
ESP8266 串口 WIFI模組 遠距離 無線模組 ESP-07
0 滿分 5 分半孔貼片工藝,所有IO引出,帶金屬屏蔽殼,可過FCC CE認證,可外接IPX天線,也可用內置陶瓷天線
NT$143NT$100 未稅加入購物車Quick View -
Grove – UART WiFi V2 無線網路模組 / 串口通訊模組 ESP8285 晶片
0 滿分 5 分Grove UART WiFi ESP8285 是一個串行無線網路收發器模組,具有無所不在的物聯網 ESP8285的SoC。
NT$524NT$420 未稅加入購物車Quick View -
WeMos D1 ESP Wroom 02 開發板 ESP8266+18650 電池座
0 滿分 5 分NT$381NT$240 未稅加入購物車Quick View -
加入購物車Quick View
mini D1 wifi NodeMcu Lua WIFI 基於ESP8266 開發板 D1 Mini ESP-12F
0 滿分 5 分加入購物車Quick View