Adafruit HUZZAH ESP8266 Breakout
NT$457 NT$440 未稅
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
尚有庫存
- 商品說明
商品說明
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:
- Reset button,
- User button that can also put the chip into bootloading mode,
- Red LED you can blink,
- Level shifting on the UART and reset pin,
- 3.3V out, 500mA regulator (you’ll want to assume the ESP8266 can draw up to 250mA so budget accordingly)
- Two diode-protected power inputs (one for a USB cable, another for a battery)
Two parallel, breadboard-friendly breakouts on either side give you access to:
- 1 x Analog input (1.8V max)
- 9 x GPIO (3.3V logic), which can also be used for I2C or SPI
- 2 x UART pins
- 2 x 3-6V power inputs, reset, enable, LDO-disable, 3.3V output
One breakout at the end has an “FTDI” pinout so you can plug in an FTDI or console cable to upload software and read/write debugging information via the UART. When you’re done with your coding, remove the cable, and this little module can be embeded into your project box.
相關商品
-
Blynk Board – ESP8266 Blynk 開發板 SparkFun原廠
0 滿分 5 分Blynk是一款易於使用的應用程序生成器,它允許用戶將各種按鈕,滑塊,圖形顯示甚至RGB控制器添加到手機中。
NT$1,429NT$1,100 未稅加入購物車Quick View -
Grove – UART WiFi V2 無線網路模組 / 串口通訊模組 ESP8285 晶片
0 滿分 5 分Grove UART WiFi ESP8285 是一個串行無線網路收發器模組,具有無所不在的物聯網 ESP8285的SoC。
NT$524NT$420 未稅加入購物車Quick View -
ESPDuino 開發板帶WiFi的 UNO R3 開發板 ESP8266 (ESP-13) 相容Arduino 附傳輸線
0 滿分 5 分ESPDuino 開發板帶WiFi的 UNO R3 開發板 ESP8266 (ESP-13)
ESPDuino = Wifi + Uno
ESPduino 是Doit 基於 ESP8266 ESP-13 開發的UNO 開發板。首款帶WiFi的Uno開發板,完美兼容Arduino UNO R3。利用ESP8266本身自帶WiFi的特性,ESPDuino天生支持WiFi,相對於傳統的Arduino開發,省去了買 WiFi擴 展板的費用,是物聯網開發板的不二之選。
NT$743NT$676 未稅加入購物車Quick View -
加入購物車Quick View
mini D1 wifi NodeMcu Lua WIFI 基於ESP8266 開發板 D1 Mini ESP-12F
0 滿分 5 分加入購物車Quick View -
ESP8266 ESP-12F WiFi 模組 ESP8266串口 轉 WiFi 無線透傳 工業級 安信可原廠公司貨
0 滿分 5 分ESP8266-12F wifi 模組 是ESP8266-12的增強版,突破性的設計改版!完善外圍電路,四層板板工藝,增強阻抗匹配,信號輸出更佳,無論是穩定性還是抗干擾能力,PCB天線經過專業實驗室測試,完美匹配,經過FCC認證,都得到了大幅度的提升!
NT$143NT$100 未稅加入購物車Quick View -
NodeMcu Lua WIFI V3 物聯網 開發板 ESP8266 wifi模組 接口 CH-340
0 滿分 5 分NT$171NT$100 未稅加入購物車Quick View -
NodeMCU Lua V2 – Lua based ESP8266 development kit 基於 ESP8266 ESP-12E wifi 開發板 CP2102
0 滿分 5 分NodeMcu 開源快速硬體原型平臺,包括固件和開發板,用幾行簡單的Lua腳本就能開發物聯網應用
- ESP8266 NodeMCU Lua v2 開發平台具有GPIO、PWM、I2C、1-Wire、ADC等功能,可為您的原型開發提供最快速的途徑
- 採用 32 位元物聯網專用 SOC 微控制器,可快速整合電腦、手機或其他 WiFi 相關裝置,讓您的設備輕鬆連接到物聯網
- 支援 802.11 b/g/n Protocol
- 支援 STA/AP/STA+AP 三種工作模式
- NodeMCU Lua v2 之 USB to TTL 晶片,已改用功能更完整、穩定的 SiLab CP2102,可隨插即用
NT$286NT$190 未稅加入購物車Quick View -
Wemos D1 mini V3.0.0 (4Mb) WIFI 物聯網開發板 基於ESP8266兼容Nodemcu
0 滿分 5 分NT$267NT$220 未稅加入購物車Quick View -
加入購物車Quick View
ESP8266 ESP-01S 串口 WIFI 收發無線模組 安信可科技原廠貨
0 滿分 5 分加入購物車Quick View -
ESP-07S ESP8266 串口轉WIFI模組 工業級 低功耗 WIFI無線模組 FCC認證 安信可公司貨
0 滿分 5 分NT$114NT$100 未稅加入購物車Quick View