Adafruit HUZZAH ESP8266 Breakout
NT$457 NT$440 未稅
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
尚有庫存
- 商品說明
商品說明
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:
- Reset button,
- User button that can also put the chip into bootloading mode,
- Red LED you can blink,
- Level shifting on the UART and reset pin,
- 3.3V out, 500mA regulator (you’ll want to assume the ESP8266 can draw up to 250mA so budget accordingly)
- Two diode-protected power inputs (one for a USB cable, another for a battery)
Two parallel, breadboard-friendly breakouts on either side give you access to:
- 1 x Analog input (1.8V max)
- 9 x GPIO (3.3V logic), which can also be used for I2C or SPI
- 2 x UART pins
- 2 x 3-6V power inputs, reset, enable, LDO-disable, 3.3V output
One breakout at the end has an “FTDI” pinout so you can plug in an FTDI or console cable to upload software and read/write debugging information via the UART. When you’re done with your coding, remove the cable, and this little module can be embeded into your project box.
相關商品
-
ESP8266 串口 WIFI模組 遠距離 無線模組 ESP-07
0 滿分 5 分半孔貼片工藝,所有IO引出,帶金屬屏蔽殼,可過FCC CE認證,可外接IPX天線,也可用內置陶瓷天線
NT$143NT$100 未稅加入購物車Quick View -
Wemos D1 mini V2.2.0 (4Mb) WIFI 物聯網開發板 基於ESP8266兼容NodeMcu
0 滿分 5 分V2.2.1使用新版ESP-12S 晶片
NT$238NT$220 未稅加入購物車Quick View -
WeMos D1 ESP Wroom 02 開發板 ESP8266+18650 電池座
0 滿分 5 分NT$381NT$240 未稅加入購物車Quick View -
加入購物車Quick View
FireBeetle Board-ESP8266 WiFi 物聯網開發板 DFRobot原廠
0 滿分 5 分加入購物車Quick View -
Wemos D1 mini V3.0.0 (4Mb) WIFI 物聯網開發板 基於ESP8266兼容Nodemcu
0 滿分 5 分NT$267NT$220 未稅加入購物車Quick View -
ESP-07S ESP8266 串口轉WIFI模組 工業級 低功耗 WIFI無線模組 FCC認證 安信可公司貨
0 滿分 5 分NT$114NT$100 未稅加入購物車Quick View -
Wio Link 物聯網開發模組 輕鬆打造智能居家環境 seeed原廠
0 滿分 5 分Wio Link 物聯網開發模組
Wio Link 是簡化你的物聯網專案開發的最佳利器。這是一個基於開源ESP8266 Wi-Fi的開發板,通過虛擬化隨插即用模塊的RESTful API與移動應用程序創建的物聯網應用。建設物聯網應用的傳統方法包括電子工程、微控制器程式設計、網路程式設計、物聯網協定處理和應用開發。每一步都涉及到各種硬體和軟件知識和挑戰。這一次,我們定義的創造物聯網應用的一種新方法。沒有硬體程式設計。沒有麵包板。無跳線。沒有焊接。3個步驟。五分鐘建立自己的物聯網應用!
- 開源Wi-Fi開發板
- 基於 ESP8266 基礎
- 模組化隨插即用
- REST風格的API和移動應用程序
- 5分鐘建立物聯網應用
NT$457NT$400 未稅加入購物車Quick View -
WeMos D1 Mini Pro wifi 開發板15件學習套件 基於 ESP8266 NodeMcu Lua
0 滿分 5 分NT$1,190NT$940 未稅加入購物車Quick View -
Wio Node 迷你 ESP8266 開發版 seeed原廠
0 滿分 5 分Wio Node 迷你 ESP8266 開發版
您可以更容易的開發各種物聯網專案,透過簡單 APP 操作即可連線,配置您的專案。建設物聯網項目是令人興奮的,你可以連接幾乎你周圍的一切和控制。然而有時不容易建立物聯網應用因為它需要大量艱苦的工作,如硬體、程式設計、跳絲和焊接等甚至一個訓練有素的用戶會處理所有的工作,花上幾個小時,更別說初學者。為了簡化物聯網項目的發展,Seeed 推出 WIO Node 方便讓開發者可以輕易透過簡單易用的UI開發自己的物聯網專案。
NT$352NT$320 未稅加入購物車Quick View -
加入購物車Quick View
ESP8266 ESP-01S 串口 WIFI 收發無線模組 安信可科技原廠貨
0 滿分 5 分加入購物車Quick View