Adafruit HUZZAH ESP8266 Breakout
NT$457 NT$440 未稅
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
尚有庫存
- 商品說明
商品說明
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:
- Reset button,
- User button that can also put the chip into bootloading mode,
- Red LED you can blink,
- Level shifting on the UART and reset pin,
- 3.3V out, 500mA regulator (you’ll want to assume the ESP8266 can draw up to 250mA so budget accordingly)
- Two diode-protected power inputs (one for a USB cable, another for a battery)
Two parallel, breadboard-friendly breakouts on either side give you access to:
- 1 x Analog input (1.8V max)
- 9 x GPIO (3.3V logic), which can also be used for I2C or SPI
- 2 x UART pins
- 2 x 3-6V power inputs, reset, enable, LDO-disable, 3.3V output
One breakout at the end has an “FTDI” pinout so you can plug in an FTDI or console cable to upload software and read/write debugging information via the UART. When you’re done with your coding, remove the cable, and this little module can be embeded into your project box.
相關商品
-
ESP8266 ESP-01S Relay 繼電器 插座模組 WIFI 智慧插座
0 滿分 5 分本智慧繼電器模組插座基於ESP-01S WIFI 模組設計,可用於DIY 自己的智慧開關,
可以通過手機APP遠端 控制,提供APP和LUA 根源程式。即拿即用,簡單方便。
本商品不包含 ESP-01S模組,若有需要請額外購買。
NT$238NT$171 未稅加入購物車Quick View -
WIFI ESP8266 模組轉接板 ESP-07 ESP-08 ESP-12 (不含模組)
0 滿分 5 分NT$48NT$29 未稅加入購物車Quick View -
Wio Node 迷你 ESP8266 開發版 seeed原廠
0 滿分 5 分Wio Node 迷你 ESP8266 開發版
您可以更容易的開發各種物聯網專案,透過簡單 APP 操作即可連線,配置您的專案。建設物聯網項目是令人興奮的,你可以連接幾乎你周圍的一切和控制。然而有時不容易建立物聯網應用因為它需要大量艱苦的工作,如硬體、程式設計、跳絲和焊接等甚至一個訓練有素的用戶會處理所有的工作,花上幾個小時,更別說初學者。為了簡化物聯網項目的發展,Seeed 推出 WIO Node 方便讓開發者可以輕易透過簡單易用的UI開發自己的物聯網專案。
NT$352NT$320 未稅加入購物車Quick View -
加入購物車Quick View
ESP8266 ESP-01S 串口 WIFI 收發無線模組 安信可科技原廠貨
0 滿分 5 分加入購物車Quick View -
Wemos D1 mini V2.2.0 (4Mb) WIFI 物聯網開發板 基於ESP8266兼容NodeMcu
0 滿分 5 分V2.2.1使用新版ESP-12S 晶片
NT$238NT$220 未稅加入購物車Quick View -
Wemos D1 mini V3.0.0 (4Mb) WIFI 物聯網開發板 基於ESP8266兼容Nodemcu
0 滿分 5 分NT$267NT$220 未稅加入購物車Quick View -
WeMos D1 Mini Pro wifi 開發板15件學習套件 基於 ESP8266 NodeMcu Lua
0 滿分 5 分NT$1,190NT$940 未稅加入購物車Quick View -
Blynk Board – ESP8266 Blynk 開發板 SparkFun原廠
0 滿分 5 分Blynk是一款易於使用的應用程序生成器,它允許用戶將各種按鈕,滑塊,圖形顯示甚至RGB控制器添加到手機中。
NT$1,429NT$1,100 未稅加入購物車Quick View -
LOLIN (WeMos) D1 WiFi Arduino UNO 開發板ESP8266 ESP-12F 直接用 Arduino IDE 開發
0 滿分 5 分WeMos D1 WiFi Arduino UNO 開發板 物聯網應用開發板
- 微控制器:ESP-8266EX
- WIFI頻率:2.4GHz
- IEEE 802.11 b / g / n
- WiFi功率放大器(PA):+25dBm
- 輸入介面:Micro USB
- 工作電壓:3.3V
- 時脈:80 / 160 MHz
- 數位I/O PIN:11支接腳
- 類比輸入PIN:1支接腳
- FLASH:4MB
- DC O2.1mm插孔
- Arduino兼容,使用Arduino IDE來編程,
- 支援OTA無線上傳
- 板載5V 1A開關電源 (最高輸入電壓24V)
- 安裝後,直接用Arduino IDE 開發,跟Arduino UNO 一樣操作
NT$286NT$200 未稅加入購物車Quick View -
NodeMcu 底座擴展板 NodeMcu Lua WIFI 開發板 ESP8266 串口擴展板 For V3 CH340版本
0 滿分 5 分NT$143NT$100 未稅加入購物車Quick View