-23%

18650 單顆 3.7V 升壓5V2A 移動式 開發板裝置電源 模組

NT$124 NT$95 未稅

18650 單顆 3.7V 升壓5V2A 移動式開發板裝置電源模組 移動電源組裝套件

使用單顆 18650 或薄型鋰聚合電池即可推動 Arduino 或樹莓派開發板的電源模組,輕鬆改造您的設備變成移動式裝置。

尚有庫存

  • 商品說明

商品說明

18650 單顆 3.7V 升壓5V2A 移動式開發板裝置電源模組 移動電源組裝套件

使用 單顆 18650 或薄型鋰聚合電池即可推動 Arduino 或樹莓派開發板的電源模組,輕鬆改造您的設備變成移動式裝置。

18650 單顆 開發板裝置電源 產品特性:

  1. 4級LED燈顯示電量,非工作狀態智能自動關機;
  2. 內置鋰電池保護IC,有過流、過壓、欠壓保護;
  3. 雙USB輸出
  4. 主板尺寸:厚8mm*寬32mm*長69mm。

輸入端口:MicroUSB
輸入要求:5V恆壓電源都可以做充電輸入電源,最匹配充電器為5V1A以上
輸出端口:USB
輸出參數:5V1A/5V2A

可搭配的電池規格說明

可用電池:18650電池、手機電池、平板電池、MP3電池等3.7V-4.2V聚合物鋰電池,可單節(片)供電,也可多節(片)並聯供電(不支持串聯,不可以串聯)。(注意:並聯增加容量,串聯是增加電壓,只能並聯用!)可以並聯2-6節18650電池!!!不可用電池:乾電池、蓄電池、1.2V可充電電池、鎳氫電池、3.2V鐵鋰聚合物鋰電池等。

產品安裝時需注意以下幾點:
1、電池要並聯,電壓要在3.2-4.2V之間才能工作,18650平頭與聚合物電池均可;
2、電池正接主板B+ 負接B-,裝反必燒主板;
3、新舊電池、型號品牌不一致電池不可混用。

3.7V To 5V 1A 2A Boost Module DIY Power Bank Mainboard Circuit Board Built In 18650 Lithium Battery Protection IC Double USB Output Over-current Over-voltage Under Voltage Protection

Features:

1. 4 level LED lights show power, non-working state smart automatic shutdown;
2. Built-in lithium battery protection IC, overcurrent, overvoltage, undervoltage protection;
3. Dual USB output;
4. Motherboard size: 69 x 32 x 8mm(L x W x H)
Product basic parameters:
Input port: Micro USB (Android port)
Input requirements: 5V constant voltage power supply can be used for charging input power, the most matching charger is 5V 1A or more
Output port: USB

Output parameters: 5V 1A / 5V 2A

Requirements for rechargeable batteries:

Available battery(3.7V-4.2V polymer lithium battery):

18650 battery, mobile phone battery, flat battery, MP3 battery, can choose single cell power supply, or multiple cell parallel power supply(does not support the series). (Note: increasing capacity in parallel and increasing voltage in series, can only be used in parallel!)

Can be connected in parallel with 2-6 pcs 18650 batteries!!!

Batteries are not available:

Dry cells, batteries, 1.2V rechargeable batteries, nickel hydrogen batteries, 3.2V iron lithium polymers, lithium batteries, etc.

Product installation should pay attention to the following points:
1. The battery should be connected in parallel, only the voltage between 3.2-4.2V can work, 18650 flat head and polymer batteries are available;
2. The battery is connected to the motherboard, B+ stands for the positive pole, B- stands for the negative pole, if it’s connected reversely will burn the motherboard;
3. The old batteries and new batteries, the batteries which model and brands are inconsistent, these battery can not be mixed.

Package included:

1 x 3.7V to 5V 2A boost module

18650 單顆 3.7V 升壓5V2A 移動式 開發板裝置電源

3.7V To 5V 1A 2A Boost Module DIY Power Bank Mainboard Circuit Board Built In 18650 Lithium Battery Protection IC Double USB Output Over-current Over-voltage Under Voltage Protection

3.7V To 5V 1A 2A Boost Module DIY Power Bank Mainboard Circuit Board Built In 18650 Lithium Battery Protection IC Double USB Output Over-current Over-voltage Under Voltage Protection
3.7V To 5V 1A 2A Boost Module DIY Power Bank Mainboard Circuit Board Built In 18650 Lithium Battery Protection IC Double USB Output Over-current Over-voltage Under Voltage Protection