樹莓派鋰電源擴展板 雙USB輸出 Pi3獨立外場供電移動電源模組
NT$505 NT$400 未稅
Raspberry Pi 樹莓派鋰電源擴展板 雙USB輸出 Pi3獨立外場供電移動電源模組
尚有庫存
- 商品說明
商品說明
Raspberry Pi 樹莓派鋰電源擴展板 雙USB輸出 Pi3獨立外場供電移動電源模組
【性能參數:】
Lithium Battery Expansion Board for Raspberry Pi
Features
- Battery capacity: 3800mAh
- Maximum output current: 1.8A
- Output voltage: 5.1V ± 0.1V
- Standard charging current / voltage: 1.0A/5.0V
- It’s convenient to power on / off raspberry pi via battery swith;
- It can last about 9 hours if only pi 3.
- The Lithium battery expansion board can be also used on cellphone.
Note: You can still charge this battery even if the switch is turn off;
Working principle
- The working PMU (Power Manage Unit)can be only worked for charging mode or step-up mode at the same time.
- If the USB-A interface without any external load (like Pi), with 5V input voltage of MicroUSB, then the PMU enter charging mode. The PMU will integrate a current-limiting resistor with the external voltage, 5V voltage for Lithium battery, around 4.6V-4.7V voltage for USB-A interface.(The “ON” LED lights )
- The PMU would enter step-up mode without external 5V voltage. Under this circumstance, turn on the switch, USB-A interface can output maxmum 5V voltage, two USB-A interface can maxmum output 1.8A current. The PMU itself has current-limiting protection. it will be short circuit when over 1.9A current.
相關商品
-
Raspberry Pi Camera Moudule V2 樹莓派攝影模組 鏡頭模組 原廠公司貨 英國製
0 滿分 5 分Raspberry Pi Model A/B/B+/Pi2/Pi3/Pi4 皆可適用.
NT$1,190NT$900 未稅加入購物車Quick View -
新款PL2303TA USB轉串口模组傳輸線 USB轉 TTL/RS232 支持WIN7
0 滿分 5 分注意!WIN8/WIN10 不支援!
NT$190NT$80 未稅加入購物車Quick View -
樹莓派雙通道RS485擴展板 for Pi 3B/4B DFRobot原廠
0 滿分 5 分NT$1,143NT$1,000 未稅加入購物車Quick View -
RELAYplate 樹莓派專用 7 路繼電器擴展板 可堆疊到最高 56 路繼電器 UL 60950 安規 SparkFun原廠
0 滿分 5 分RELAYplate 是 Raspberry Pi 樹莓派的第一個專用繼電器擴展板,符合滿足 UL 60950 的安全規範要求,同時能夠切換 120v交流電。
加入購物車Quick View -
樹莓派 3代 B+ 專用 GPIO Shield 擴展板 V3 可堆疊
0 滿分 5 分樹莓派3 代B+ 專用 GPIO擴展板 V3 可堆疊
絕對的調試神器,把GPIO分別複製三次,GPIO分開使用,不會打架
樹莓派3代B+專用GPIO擴展板,採用堆疊式的積木設計,將樹莓派的IO口一組擴展出三組,每個IO口我們都有清晰的標記,方便使用。我們還附送帶螺絲和銅柱,讓擴展板更加牢固的固定在主板上,讓大家在做實驗和DIY的時候更方便。
NT$400NT$333 未稅加入購物車Quick View -
樹莓派 攝影鏡頭 CSI 排線 50CM 加長版特製 特別訂製排線
0 滿分 5 分英國原廠默認贈送的是15cm,比較短,只適合把攝像頭放在樹莓派旁邊,不適合工業用機台安裝或者自動車的配置,台灣物聯科技特別請廠商開模訂製兩種尺寸, 本商品為 50CM 版本, 另有30CM 版
NT$124NT$90 未稅加入購物車Quick View -
樹莓派 專用配件 T型 GPIO 擴展板 T-Cobbler Plus + 40P 彩虹排線 + 400孔麵包板
0 滿分 5 分樹莓派Raspberry Pi 2,3 代專用配件T型GPIO擴展板T-Cobbler Plus 樹莓派2代專用配件【同時兼容1代B+型樹莓派】,適用於麵包板實驗。本產品採用台灣正凌40P純金插座進行生產(白色塑料件上帶正凌品牌LOGO)Raspberry Pi的GPIO每一個針腳都提供不同的用途,Model B+與Pi 2 Model B有40個針腳,有提供電源和其它的應用。
出貨清單:
- T型GPIO擴展板 T-Cobbler Plus 一塊
- 40P 高品質彩虹排線 一條
- 400孔麵包板
NT$381NT$238 未稅加入購物車Quick View -
英國 樹莓派 原廠外殼 Raspberry Pi2 / Pi3 B / B+ 適用 紅白色
0 滿分 5 分樹莓派2代進口草莓外殼 Official Raspberry Pi Case 官方推薦
2015 官方原廠紅白色樹莓派機殼
NT$333NT$286 未稅加入購物車Quick View -
樹莓派原廠外殼 Raspberry Pi 3B專用 Model 3B ABS 透明 (3B+不適用)
0 滿分 5 分原裝樹莓派 Raspberry pi B+ 英國原廠ABS外殼
Raspberry Pi B+/ Pi 2 B Cases — 3 part assembly
NT$333NT$190 未稅加入購物車Quick View -
加入購物車Quick View
樹莓派 外殼 Raspberry Pi 2,3 代 工控專用 ABS 透明機殼 GPIO 保護盒子 (可壁掛)
0 滿分 5 分出貨產品不含圖片裡的樹梅派開發板 !
此產品為專為樹莓派 3B與 3B+ 量身打造的一款極度實用的保護外殼,物超所值,操作簡單。產品為透明ABS塑料材質,完善的安裝孔和接口使該外殼即能保護裡面的板子,又能夠充分開發所有端 口。使用時請參看我們的說明,來固定樹莓派,並且安裝矽膠墊。
加入購物車Quick View